LabVIEW based software for verification of the new idea of lining for mine shafts located in salt rock mass

• Autorzy: Kamiński Paweł , Ahmad Mahmood

Identyfikatory

DOI

10.32056/KOMAG2021.3.5

• Języki publikacji: EN

Abstrakty

EN

High values of salt rock mass convergence might cause serious problems with maintenance of shaft lining located in salt rock sections. The most efficient existing method of negative convergence influence prevention is periodic removal of creeping salt from shaft walls. However, the process of salt removal is problematic in terms of shaft and hoisting system typical operation. A new shaft lining idea allows removal of creeping salt by leaching without the need for stopping the shaft operation. Following paper presents a software, developed in LabVIEW environment and applied in the framework of test facility, designed for purpose of verification of theoretical assumptions of new construction of shaft lining. Developed software consists of applications for data acquisition, based on Event-Driven Queued State Machine pattern, and data processing, designed as Producer-Consumer pattern.

Słowa kluczowe

EN

shaft lining; software for mining engineering; salt mine; mine shaft; LabVIEW; data acquisition; data processing; Event-Driven Queued State Machine

PL

górnictwo solne; LabView; szyby kopalniane

• Wydawca: Instytut Techniki Górniczej KOMAG
• Czasopismo: Mining Machines
• Rocznik: 2021
• Tom: no. 3
• Strony: 45--57
• Opis fizyczny: Bibliogr. 20 poz., rys., zdj.

Twórcy

autor

Kamiński Paweł

• AGH University of Science and Technology, Mickiewicza 30, 30-059 Krakow, Poland

autor

Ahmad Mahmood

• Department of Civil Engineering, University of Engineering and Technology Peshawar (Bannu Campus), Bannu 28100, Pakistan

Bibliografia

• [1] Tijani M.N., Leohnert E.P.: Exploitation and traditional processing techniques of brine salt in parts of the Benue-Trough, Nigeria. Int. J. Miner. Process 2004; 74:157-167
• [2] Jodłowski A.: Żupa solna w Wieliczce. Muzeum Żup Krakowskich, Wieliczka, 2000 [In Polish]
• [3] Danczyn R.: Dawne tradycje warzenia soli na terenach Bojkowszczyzny, In: Studia i materiały do dziejów żup solnych w Polsce, t. XXVIII, Muzeum Żup Krakowskich Wieliczka, Wieliczka, 2012 [In Polish]
• [4] Korzeniowski W, Poborska-Młynarska K, Skrzypkowski K, Zagórski K, Chromik M.: Cutting Niches in Rock Salt by Means of a High-Pressure Water Jet in Order to Accelerate the Leaching of Storage Caverns for Hydrogen or Hydrocarbons. Energies. 2020; 13(8):1911. https://doi.org/10.3390/en13081911
• [5] Kunstman A., Poborska-Młynarska K., Urbańczyk K. Zarys otworowego ługownictwa solnego. Wydawnictwo AGH, Kraków, 2002 [In Polish]
• [6] Gonet A., Brudnik K., Przybyło J., Stryczek S., Wolańska A.: Kopalnia Soli „Wieliczka”. Ratowanie zabytku. Kopalnia Soli „Wieliczka” Trasa Turystyczna, Wieliczka, 2017 [In Polish]
• [7] Lotze F. Steinsalz und Kalisalz. Gebrüder Berntraeger, Berlin 1957
• [8] Schuppe F. Untersuchungen über rheologische. Eigenschaften von Salzgestein, 1966
• [9] Höfer K.H., Thoma K.: Triaxial tests on salt rocks. International Journal of Rock Mechanics and Mining Sciences & Geomechanics, 1968;5(2):195–196
• [10] Serata S.: Application of continuum mechanics to design of deep Potash mines in Canada. International Journal of Rock Mechanics and Mining Sciences & Geomechanics, 1968; 5(4):293–314
• [11] Ślizowski J.: Badania własności reologicznych soli kamiennej przy projektowaniu komór magazynowych gazu ziemnego w górotworze solnym. Przegląd Górniczy, 2001;5:9–15. [In Polish]
• [12] Jeremic M.L.: Rock mechanics in salt mining. Brookfield: A.A. Balkema, Rotterdam 1994
• [13] Klein J.: Stresses in sliding-shaft linings due to curvature. In: 3rd International Conference on Shaft Design and Construction, London, 12–16.04.2012
• [14] Flisiak D.: Badania procesów reologicznych w górotworze solnym wywołanych użytkowaniem podziemnych magazynów gazu. Projekt badawczy KBN Nr 5T12A 01722, 2005 [unpublished]
• [15] Fabich S., Morawiec P., Soroko K., Szlązak M.: Problems with maintenance of shaft lining in the salt interval of SW-4 shaft in "Polkowice-Sieroszowice" copper mine. Przegląd Górniczy 2006;72(3):65–74
• [16] Chudek M., Kleta H., Wojtusiak A., Chudek M.D.: Obudowa szybów w warunkach znacznych ciśnień deformacyjnych górotworu. Górnictwo i Geoinżynieria 2009;33(3/1):87–90 [In Polish]
• [17] Kamiński P., Czaja P. An innovative solution to counteract convergence of shaft lining in rock salt strata, Archives of Mining Sciences 2019;64(2):429–445 DOI:10.24425/ams.2019.128693
• [18] Kamiński P.: A New Method of Regulation of Loads Acting on the Shaft Lining in Sections Located in the Salt Rock Mass. Energies. 2021; 14(1):42. https://doi.org/10.3390/en14010042
• [19] Kamiński P., Cyran K.: Research device for lining effort measurements located on the large depth in rock salt layers. Przegląd Solny 2014; 10:75–84 [In Polish]
• [20] Lukindo A. LabVIEW Queued State Machine Producer-Consumer Architecture 2007. http://www.mezintel.com/blog/labview-queued-state-machine [Accessed: 19.01.2021]

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).