Welding of mobile platform elements made from mixed grades of high-strength steels

• Autorzy: Szczucka-Lasota Bożena , Węgrzyn Tomasz , Łazarz Bogusław , Lukaszkowicz Krzysztof , Jurek Adam , Wilczyński Krzysztof Ireneusz

Identyfikatory

DOI

10.20858/sjsutst.2020.107.15

• Języki publikacji: EN

Abstrakty

EN

In the mobile platform structure, there is an increasing necessity to weld steels from the various groups. For instance, it has become necessary to connect AHSS (Advanced High-Strength Steel) with fine-grained steels. This article verifies the possibility of obtaining accurate mixed welded joints from different grades of DOCOL 1400 steel (from the AHSS group) with S700 MC steel (from the fine-grained steel group). The structure, quality and mechanical properties of the obtained welded joints were thoroughly analysed. The joints were made at various welding speed with preheating to 80°C and without preheating.

Słowa kluczowe

EN

civil engineering; transport; mobile platforms; welding

PL

inżynieria lądowa; transport; platformy mobilne; spawanie

• Wydawca: Wydawnictwo Politechniki Śląskiej
• Czasopismo: Zeszyty Naukowe. Transport / Politechnika Śląska
• Rocznik: 2020
• Tom: z. 107
• Strony: 197--203
• Opis fizyczny: Bibliogr. 10 poz.

Twórcy

autor

Szczucka-Lasota Bożena

• Faculty of Transport and Aviation Engineering, The Silesian University of Technology, Krasińskiego 8 Street, 40-019 Katowice, Poland

autor

Węgrzyn Tomasz

• Faculty of Transport and Aviation Engineering, The Silesian University of Technology, Krasińskiego 8 Street, 40-019 Katowice, Poland

autor

Łazarz Bogusław

• Faculty of Transport and Aviation Engineering, The Silesian University of Technology, Krasińskiego 8 Street, 40-019 Katowice, Poland

autor

Lukaszkowicz Krzysztof

• Faculty of Transport and Aviation Engineering, The Silesian University of Technology, Krasińskiego 8 Street, 40-019 Katowice, Poland

autor

Jurek Adam

• Faculty of Mechanical Engineering, The Silesian University of Technology, Konarskiego 18A Street, 44-100 Gliwice, Poland

autor

Wilczyński Krzysztof Ireneusz

• Novar Sp. z o. o. Gliwice, Gliwice, Poland. Email: [e-mail] 6 Warsaw University of Technology, Plac Politechniki 1, 00-661 Warsaw, Poland

Bibliografia

• 1. Izairi N., F. Ajredini, A. Vevecka-Pfiftaj, P. Makreski, M.M. Ristova. 2018. “Microhardness evolution in relation to the cFigtalline microstructure of aluminum alloy AA3004”. Archives of Metallurgy Materials 63(3): 1101-1108. DOI: https://doi.org/10.24425/123782.
• 2. Giles T.L., K. Oh-Ishi, A.P. Zhilyaev, S. Swami, M.W. Mahoney, T.R. McNelley. 2009. “The effect of friction stir processing on the microstructure and mechanical properties of an aluminum lithium alloy”. Metallurgical and Materials Transactions 40(1): 104-115. DOI: https://doi.org/10.1007/s11661-008-9698-8.
• 3. Hamilton C., S. Dymek, A. Węglowska, A. Pietras. “Numerical simulations for bobbin tool friction stir welding of aluminum 6082-T”. 2018. Archives of Metallurgy Materials 63(3): 1115-1123. DOI: https://doi.org/10.24425/123784.
• 4. Benato R., F. Dughiero, M. Forzan, A. Paolucci. 2002. “Proximity effect and magnetic field calculation in GIL and in isolated phase bus ducts”. IEEE Transactions on Magnetics 38(2): 781-784. DOI: https://doi.org/10.1109/20.996202.
• 5. Jaewson L., A. Kamran, P. Jwo. 2011. “Modeling of failure mode of laser welds in lapshear speciments of HSLA steel sheets”. Engineering Fracture Mechanics: 347-396.
• 6. Celin R., J. Burja. 2018. “Effect of cooling rates on the weld heat affected zone coarse grain microstructure”. Metallurgical and Materials Engineering 24(1): 37-44. DOI: https://doi.org/10.30544/342.
• 7. Darabi J., K. Ekula. “Development of a chip-integrated micro cooling device”. Microelectronics Journal 34(11): 1067-1074. DOI: https://doi.org/10.1016/j.mejo.2003.09.010.
• 8. Hadryś D. “Impact load of welds after micro-jet cooling”. Archives of Metallurgy and Materials 60(4): 2525-2528. DOI: https://doi.org/10.1515/amm-2015-0409.
• 9. Spišák E., J. Majerníková, J. Slota. 2014. “Change of ears creation of AHSS steels after heat treatment of zinc coating”. Metalurgija 53(4): 473-476. ISSN: 0543-5846.
• 10. Samardžić I., M. Dunđer, M. Katinić, N. Krnić. 2017. “Weldability investigation on real welded plates of fine-grained high-strength steel S960QL”. Metalurgija 56(1-2): 207-210. ISSN: 0543-5846.