Investigation of thermal and air efficiency in trombe wall of modular building

• Autorzy: Zhelykh Vasyl , Ulewicz Małgorzata , Furdas Yurii , Shepitchak Volodymyr

Identyfikatory

DOI

10.24425/ace.2023.147682

• Języki publikacji: EN

Abstrakty

EN

The proposed Trombe wall design is an innovative and effective solution for addressing issues related to building energy efficiency. The Trombe wall can help reduce a building’s energy consumption, provide optimal indoor temperature, and minimize the building’s environmental impact by utilizing renewable energy sources. The article deals with the study of the heat-air characteristics of the Trombe Wall, which performs the functions of external protection of a modular house, with the aim of further evaluating the possibility of using it as a hybrid protection with additional heating and ventilation functions assigned to it. The results of experimental research conducted on one of the elements of external protection of a modular house in the form of the Trombe Wall are presented. The experimentally obtained graphic dependences were compared with the calculated data and the convergence was evaluated. The proposed design allows you to organize air exchange in the premises with a multiplicity within 1-1.5 h-1, and also provides an opportunity to provide additional thermal power in the amount of 250 W/m2. The article presents the results of experimental studies that allow to evaluate the thermal characteristics of the proposed design of external protection for a modular house. These results indicate that with the given geometric dimensions, in particular with a volume of 14 m3, the thermal power utilized by the Trombe wall is within 0.2-0.7 kW.

Słowa kluczowe

EN

modular building; thermal characteristics; thermosiphon solar collector; Trombe wall; thermal efficiency

PL

budynek modułowy; charakterystyka cieplna; kolektor słoneczny termosyfonowy; ściana Trombe'a; sprawność cieplna

• Wydawca: Komitet Inżynierii Lądowej i Wodnej PAN ; Politechnika Warszawska, Wydział Inżynierii Lądowej
• Czasopismo: Archives of Civil Engineering
• Rocznik: 2023
• Tom: Vol. 69, nr 4
• Strony: 663--678
• Opis fizyczny: Bibliogr. 54 poz., il., tab.

Twórcy

autor

Zhelykh Vasyl

• Czestochowa University of Technology, Faculty of Civil Engineering, Czestochowa, Poland

• https://orcid.org/0000-0002-5063-5077

autor

Ulewicz Małgorzata

• Czestochowa University of Technology, Faculty of Civil Engineering, Czestochowa, Poland

• https://orcid.org/0000-0001-8766-8393

autor

Furdas Yurii

• Lviv Polyechnic National University, Department of Heat and Gas Supply and Ventilation, Lviv, Ukraine

• https://orcid.org/0000-0002-0572-6236

autor

Shepitchak Volodymyr

• Lviv Polyechnic National University, Department of Heat Engineering and Thermal and Nuclear Power Plants, Lviv, Ukraine

• https://orcid.org/0000-0001-5883-548X

Bibliografia

• [1] F. Bre and V.D. Fachinotti, “A computational multi-objective optimization method to improve energy efficiency and thermal comfort in dwellings”, Energy and Buildings, vol. 154, pp. 283-294, 2017, doi: 10.1016/j.enbuild.2017.08.002.
• [2] S. Firląg, A. Miszczuk, and B. Witkowski, “Analysis of climate change and its potential influence on energy performance of building and indoor temperatures. Part 2: Energy and thermal simulation”, Archives of Civil Engineering, vol. 69, no. 2, pp. 195-209, 2023, doi: 10.24425/ace.2023.145263.
• [3] M. Kasynets, K. Kozak, B. Piznak, and I. Venhryn, “Enhancing of efficiency of solar panels combined with buildings coating”, in Lecture Notes in Civil Engineering, vol. 290. Springer, 2023, pp. 136-149.
• [4] V. Zhelykh, P. Shapoval, S. Shapoval, and M. Kasynets, “Influence of orientation of buildings facades on the level of solar energy supply to them”, in Lecture Notes in Civil Engineering, vol. 100. Springer, 2021, pp. 449-504.
• [5] S. Shapoval, V. Zhelykh, I. Venhryn, K. Kozak, and R. Krygu, “Theoretical and experimental analysis of solar enclosure as part of energy-efficient house”, Eastern-European Journal of Enterprise Technologies, vol. 2, no. 8(98), pp. 38-45, 2019, doi: 10.15587/1729-4061.2019.160882.
• [6] T. Salem, N. Metni, M. Kazma, and H. Hanna, “Numerical investigation of the impact of integrating solar collectors under stagnation”, presented at the 2020 5th International Conference on Renewable Energies for Developing Countries, REDEC 2020.
• [7] B. Koua, P.M.E. Koffi, and P. Gbaha, “Comparative study of the thermal performance of two thermosiphon solar water heaters system”, International Journal of Renewable Energy Development, vol. 9, no. 3, pp. 401-410, 2020, doi: 10.14710/ijred.2020.30575.
• [8] F. Peci, F. Taboas, F. Comino, and M. Ruiz de Adana, “Experimental study of a modular unglazed transpired collector façade for building refurbishment”, Solar Energy, vol. 201, pp. 247-258, 2020, doi: 10.1016/j.solener.2020.02.103.
• [9] A. Hamburg, K. Kuusk, A. Mikola, and T. Kalamees, “Realisation of energy performance targets of an old apartment building renovated to nZEB”, Energy, vol. 194, art. no. 116874, 2020, doi: 10.1016/j.energy.2019.116874.
• [10] P. Bevilacqua, R. Bruno, J. Szyszka, D. Cirone, and A. Rollo, “Summer and winter performance of an innovative concept of Trombe Wall for residential buildings”, Energy, vol. 258, art. no. 124798, 2022, doi: 10.1016/j.energy.2022.124798.
• [11] L. Moosavi, S. Alidoost, F. Norouzi, S. Sattary, and S. Banihashemi, “Trombe Wall’s thermal and energy performance – A retrofitting approach for residential buildings in arid climate of Yazd, Iran”, Journal of Renewable and Sustainable Energy, vol. 14, no. 4, 2022, doi: 10.1063/5.0089098.
• [12] S.M. Tabarhoseini and M. Sheikholeslami, “Modeling of evacuated tube solar collector involving longitudinal fins and nanofluids”, Sustainable Energy Technologies and Assessments, vol. 53, art. no. 102587, 2022, doi: 10.1016/j.seta.2022.102587.
• [13] S. Awani, R. Chargui, and B. Tashtoush, “Experimental and numerical evaluation of a new design of a solar thermosyphon water heating system with phase change material”, Journal of Energy Storage, vol. 41, art. no. 102948, 2021, doi: 10.1016/j.est.2021.102948.
• [14] A.R. Kalair, M. Seyedmahmoudian, M.S. Saleem, N. Abas, S. Rauf, and A. Stojcevski, “A comparative thermal performance assessment of various solar collectors for domestic water heating”, International Journal of Photoenergy, vol. 2022, art. no. 9536772, pp. 1-17, 2022, doi: 10.1155/2022/9536772.
• [15] M. Kunelbayev, T. Ormanov, T. Sundetov, and M. Amirgaliyev, “Mathematical substantiation of principal parameters of thermosiphon effect for solar heating”, presented at 2nd International Conference on Electrical, Communication and Computer Engineering, ICECCE 2020.
• [16] H. Biglarian, M.M. Sharfabadi, M. Alizadeh, and H. Gharaei, “Performance investigation of solar thermal collector with auxiliary heater for space heating”, Journal of Central South University, vol. 28, no. 11, pp. 3466-3476, 2021.
• [17] M. Eltaweel, A.A. Abdel-Rehim, and H. Hussien, “Indirect thermosiphon flat-plate solar collector performance based on twisted tube design heat exchanger filled with nanofluid”, International Journal of Energy Research, vol. 44, no. 6, pp. 4269-4278, 2020, doi: 10.1002/er.5146.
• [18] O.R. Alomar, H.M. Abd, and M.M. Mohamed Salih, “Efficiency enhancement of solar air heater collector by modifying jet impingement with v-corrugated absorber plate”, Journal of Energy Storage, vol. 55, art. no. 105535, 2022, doi: 10.1016/j.est.2022.105535.
• [19] S.A.M. Burek and A. Habeb, “Air flow and thermal efficiency characteristics in solar chimneys and Trombe Walls”, Energy and Buildings, vol. 39, no. 2, pp. 128-135, 2007, doi: 10.1016/j.enbuild.2006.04.015.
• [20] G. He, “A general model for predicting the airflow rates of a vertically installed solar chimney with connecting ducts”, Energy and Buildings, vol. 229, art. no. 110481, 2020, doi: 10.1016/j.enbuild.2020.110481.
• [21] C. W. Adihou, A.A. Djossou, E.C. Vodounnou, C. Awanto, C.A. Houngan, and M. Anjorin, “Comparative study of the energy performance of two thermosiphon solar collectors with differen twater channels: Channel in round tubes and channel under flat plate”, presented at the International Conference on Electrical, Computer, and Energy Technologies, ICECET 2021.
• [22] Y. Amirgaliyev, M. Kunelbayev, T. Ormanov, T. Sundetov, and S. Daulbayev, “Comparative analysis of a flat solar collector and flat solar collector with chemical coating”, Thermal Science, vol. 26, no. 1, pp. 147-156, 2022, doi: 10.2298/TSCI201108173A.
• [23] J. Vera-Medina, C. Fernandez-Peruchena, J. Guasumba, and I. Lillo-Bravo, “Performance analysis of factory-made thermosiphon solar water heating systems”, Renewable Energy, vol. 164, pp. 1215-1229, 2021, doi: 10.1016/j.renene.2020.10.133.
• [24] M. Eltaweel and A.A. Abdel-Rehim, “Energy and exergy analysis of a thermosiphon and forced-circulation flat-plate solar collector using MWCNT/Water nanofluid”, Case Studies in Thermal Engineering, vol. 14, 2019, doi: 10.1016/j.csite.2019.100416.
• [25] Y. Amirgaliyev, M. Kunelbayev, and T. Sundetov, “Calculation of the energy of a two-circuit solar system with thermosiphon circulation based on the internet of things”, in Computational intelligence techniques for green smart cities. green energy and technology, M. Lahby, A. Al-Fuqaha, and Y. Maleh, Eds. Springer, 2022, pp. 321-333, doi: 10.1007/978-3-030-96429-0_15.
• [26] M. Çimen, M. Colakoglu, and A. Güngör, “Overheating limitation of thermosiphon solar collectors by controlling heat pipe fluid in all glass evacuated tubes”, Solar Energy, vol. 230, pp. 515-527, 2021, doi: 10.1016/j.solener.2021.10.066.
• [27] M. Grosso, G. Fracastoro, M. Simonetti, and G. Chiesa, “A hybrid passive cooling wall system: Concept and laboratory testing results”, Energy Procedia, vol. 78, pp. 79-84, 2015, doi: 10.1016/j.egypro.2015.11.118.
• [28] V. Zhelykh, I. Venhryn, K. Kozak, and S. Shapoval, “Solar collectors integrated into transparent facades”, Production Engineering Archives, vol. 26, no. 3, pp. 84-7, 2020, doi: 10.30657/pea.2020.26.17.
• [29] S. Manu, G. Brager, and A. Dennis, “Performance evaluation of climate responsive buildings in India: Two case studies from hot-dry and composite climate zones”, in Proceedings of 33rd PLEA International Conference: Design to Thrive – PLEA 2017, vol. 3. NCEUB, 2017, pp. 4164-4171.
• [30] H. Mastouri, B. Benhamou, H. Hamdi, and E. Mouyal, “Thermal performance assessment of passive techniques integrated into a residential building in semi-arid climate”, Energy and Buildings, vol. 143, pp. 1-16, 2017, doi: 10.1016/j.enbuild.2017.03.022.
• [31] Z.D. Chen, P. Bandopadhayay, J. Halldorsson, C. Byrjalsen, P. Heiselberg, and Y. Li, “An experimental investigation of a solar chimney model with uniform wall heat flux”, Building and Environment, vol. 38, no. 7, pp. 893-906, 2003, doi: 10.1016/S0360-1323(03)00057-X.
• [32] M. Sandberg and B. Moshfegh, “Ventilated-solar roof air flow and heat transfer investigation”, Renewable Energy, vol. 15, no. 1-4, pp. 287-292, 1998.
• [33] M. Ulewicz, V. Zhelykh, K. Kozak, and Y. Furdas, “Application of thermosiphon solar collectors for ventilation of premises”, in Advances in Resource-saving Technologies and Materials in Civil and Environmental Engineering. Proceedings of CEE 2019. Springer, 2020, doi: 10.1007/978-3-030-27011-7_23.
• [34] V. Zhelykh, C. Kozak, and O. Savchenko, “Using of thermosiphon solar collector in an air heating system of passive house”, Pollack Periodica, vol. 11, no. 2, pp. 125-133, 2016, doi: 10.1556/606.2016.11.2.11.
• [35] Y. Liu, Z. Yu, C. Song, and D. Wang, “Heating load reduction characteristics of passive solar buildings in Tibet, China”, Building Simulation, vol. 15, no. 6, pp. 975-994, 2022.
• [36] M. Ulewicz, V. Zhelykh, K. Kozak, and Y. Furdas, “Application of thermosiphon solar collectors for ventilation of premises”, in Proceedings of CEE 2019. Lecture Notes in Civil Engineering, vol. 47. Springer, 2020, pp. 180-187.
• [37] M. Jalalpour and C. Nnaji, “Investigating the impact of Trombe wall on building energy saving and thermal comfort - case study”, in Proceedings of the Canadian Society of Civil Engineering Annual Conference 2021. Lecture Notes in Civil Engineering, vol. 247. Springer, 2023, pp. 577-586.
• [38] S. Zhou and A.G. Razaqpur, “Efficient heating of buildings by passive solar energy utilizing an innovative dynamic building envelope incorporating phase change material”, Renewable Energy, vol. 197, pp. 305-319, 2022, doi: 10.1016/j.renene.2022.07.073.
• [39] V. Zhelykh, M. Ulewicz, Y. Furdas, M. Adamski, and M. Rebman, “Investigation of pressure coefficient distribution on the surface of a modular building”, Energies, vol. 15, no. 13, art. no. 4644, 2022, doi: 10.3390/ en15134644.
• [40] K.A. Alharbi, O. Aldosari, H. Sina, H.S. Aybar, S. Fuxi, S.E. Alkhatib, and A.A.A Mousa, “Installation of rectangular enclosures filled with phase change nanomaterials on the Thrombus walls of a residential building to manage solar radiation in different seasons of the year”, Journal of Building Engineering, vol. 57, 2022, doi: 10.1016/j.jobe.2022.104732.
• [41] L. Xiao, L. Qin, and S.Y. Wu, “Proposal and application of comprehensive thermal comfort evaluation model in heating seasons for buildings with solar Trombe wall”, Applied Thermal Engineering, vol. 213, art. no. 118774, 2022, doi: 10.1016/j.applthermaleng.2022.118774.
• [42] F. Abbassi, N. Naili, and L. Dehmani, “Optimum Trombe wall thickness in the Mediterranean Tunisian Context: An energetic and economic study”, Energy Science and Engineering, vol. 10, no. 8, pp. 2930-2939, 2022, doi: 10.1002/ese3.1179.
• [43] D. Liang, M. Ibrahim, T. Saeed, A.M. El-Refaey, Z. Li, and M.A. Fagiry, “ Simulation of a Trombe wall with a number of semicircular fins placed on the absorber plate for heating a room in the presence of nano-PCM”, Journal of Building Engineering, vol. 50, art. no. 104173, 2022, doi: 10.1016/j.jobe.2022.104173.
• [44] D. Fidaros, C. Baxevanou, M. Markousi, and A. Tsangrassoulis, “Assessment of various Trombe wall Geometries with CFD Study”, Sustainability, vol. 14, no. 9, art. no. 4877, 2022, doi: 10.3390/su14094877.
• [45] H. Chen, S. Liu, M. Eftekhari, Y. Li, W. Ji, and Y. Shen, “Experimental studies on the energy performance of a novel wavy-shape Trombe wall”, Journal of Building Engineering, vol. 61, art. no. 105242, 2022, doi: 10.1016/j.jobe.2022.105242.
• [46] M. Rabani, “Experimental comparison of energy and energy analysis of a new Designed and a normal Trombe wall”, Energy, vol. 260, art. no. 125050, 2022, doi: 10.1016/j.energy.2022.125050.
• [47] S.Y. Wu, R.R. Yan, and L. Xiao, “A novel passive solar vertical-finned-thermo catalytic - Trombe wall system for air purification and heating”, Journal of Cleaner Production, vol. 374, art. no. 134065, 2022, doi: 10.1016/ j.jclepro.2022.134065.
• [48] A. Mokni, A. Lashin, M. Ammar, and H. Mhiri, “Thermal analysis of a Trombe wall in various climatic conditions: An experimental study”, Solar Energy, vol. 243, pp. 247-263, 2022, doi: 10.1016/j.solener.2022.08.011.
• [49] J. Čurpek and M. Čekon, “A simple Trombe wall enhanced with a phase change material: Building Performance Study”, in Sustainability in Energy and Buildings 2021. Smart Innovation, Systems and Technologies, vol. 263. Springer, 2022, pp. 281-291.
• [50] P. Bevilacqua, R. Bruno, J. Szyszka, D. Cirone, and A. Rollo, “Summer and winter performance of an innovative concept of Trombe Wall for residential buildings”, Energy, vol. 258, art. no. 124798, 2022, doi: 10.1016/j.energy.2022.124798.
• [51] J. Szyszka, P. Bevilacqua, and R. Bruno, “An innovative Trombe wall for winter use: The thermo-diode Trombe Wall”, Energies, vol. 13, art. no. 2188, 2020, doi: 10.3390/en13092188.
• [52] R. Bruno, P. Bevilacqua, D. Cirone, S. Perrella, and A. Rollo, “A calibration of the solar load ratio method to determine the heat gain in PV-Trombe walls”, Energies, vol. 15, no. 1, art. no. 328, 2022, doi: 10.3390/en15010328.
• [53] O. Voznyak and V. Zhelykh, Basics of scientific research in construction. Lviv: Publication of Lviv Polytechnic University, 2003.
• [54] J. Błotny and M. Nems, “Analysis of the impact of the construction of a Trombe wall on the thermal comfort in a building located in Wrocław, Poland”, Atmosphere, vol. 10, no. 12, art. no. 761, 2019, doi: 10.3390/atmos10120761.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).