Synthesis and Thermal Properties of Europium-Cerium Oxide as a New Fluorite-Type Ceramic Material for Thermal Barrier Coatings Applications

• Autorzy: Mikuśkiewicz M. , Stopyra M. , Moskal G.

Identyfikatory

DOI

10.24425/amm.2018.125147

• Języki publikacji: EN

Abstrakty

EN

In the present paper the structure and thermal properties of europium cerium oxides were investigated. The material for the research was obtained via solid state synthesis. The initial powders: ceria CeO₂ and europia Eu₂O₃ were mixed in 1:1 mass ratio (non-stoichiometric proportion with the excess of CeO₂) and milled. The sintering process was performed using high temperature vacuum press at 1350°C. Calorimetric analysis was conducted both for initial powders and milled mixture. The structure, phase composition and thermal diffusivity of obtained material were investigated in as-sintered condition. It was revealed that the obtained material was multi-phase. Non-stoichiometric phases including Ce_0.5Eu_0.5O_1.75 with fluorite type structure and different lattice parameters were present. Thermal diffusivity decreased in the range from 25 to 900°C from 1.49 to 0.57 mm² /s and then increased to 0.70 mm² /s at 1400°C.

Słowa kluczowe

EN

TBC; cerium oxide; europium oxide; thermal properties

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2018
• Tom: Vol. 63, iss. 4
• Strony: 2089--2093
• Opis fizyczny: Bibliogr. 18 poz., fot., rys., tab., wykr.

Twórcy

autor

Mikuśkiewicz M.

• Silesian University of Technology, Institute of Materials Engineering, 8 Krasińskiego Str., 40-019 Katowice, Poland

autor

Stopyra M.

• Silesian University of Technology, Institute of Materials Engineering, 8 Krasińskiego Str., 40-019 Katowice, Poland

autor

Moskal G.

• Silesian University of Technology, Institute of Materials Engineering, 8 Krasińskiego Str., 40-019 Katowice, Poland

Bibliografia

• [1] A. Y. Zhang, M. K. Lu, G. J. Zhou, S. M. Wang, Y. Y. Zhou, J. Phys. Chem. Solids 67, 2430-2434 (2006).
• [2] M. A. Subramanian, G. Aravamudan, G.V.S. Rao, Prog. Solid State Chem. 15, 55-143 (1990).
• [3] S. V. Ushakov, A. Navrotsky, J. Am. Ceram. Soc. 90, 1171-1176 (2007).
• [4] J. A. Labrincha, J. R. Frade, F.M.B. Marques, Solid State Ionics 99, 33-40 (1997).
• [5] O. Takahisa, I. Katsuhiko, T. Ryoji, O. Y.M. Shinya, Solid State Ionics 167, 389-387 (2004).
• [6] K. E. Sickafus, L. Minervini, R. W. Grimes, J. A. Valdez, M. Ishimaru, F. Li, K. J. McClellan, T. Hartmann, Science 289, 748-751 (2000).
• [7] G. Moskal, L. Swadźba, M. Hetmańczyk, B. Witala, B. Mendala, J. Mendala., P. Sosnowy, J. Eur. Ceram. Soc. 32, 2025-2034 (2012).
• [8] R. Vassen, X. Q. Cao, F. Tietz, D. Basu, D. Stover, J. Am. Ceram. Soc. 83, 2023-2028 (2000).
• [9] X. Q. Cao, R. Vassen, D. Stover, J. Eur. Ceram. Soc. 24, 1-10 (2004).
• [10] M. J. Maloney, Thermal barrier coating systems and materials. U.S. Patent No. 6284323, (2001).
• [11] X. Cao, Z. Ma, Y. Liu, Z. Du, K. Zheng, Rare Metal. Mat. Eng. 42, 1134-1138 (2013).
• [12] V. V. Popov, V. F. Petrunin, S. A. Korovin, A. P. Menushenkov, O. V. Kashurnikova, R.V. Chernikov, A.A. Yaroslavtsev, Y.V. Zubavichus, Russ. J. Inorg. Chem. 56, 1538-1544 (2011).
• [13] M. Mikuśkiewicz, G. Moskal, D. Migas, M. Stopyra, Ceram. Int. (2018), DOI: 10.1016/j.ceramint.2018.07.301 (in press).
• [14] M.J.D. Rushton, R. W. Grimes, C. R. Stanek, S. Owens, J. Mater. Res. 19, 1603-1604 (2004).
• [15] S. Jucha, G. Moskal, M. Mikuśkiewicz, M. Stopyra, J .Therm. Anal. Calorim. 126, 1015-1021 (2016).
• [16] G. Moskal, M. Mikuśkiewicz, Defect Diffus. Forum 336, 91-96 (2013).
• [17] G. Yang, C. Zhao, Int. J. Heat Mass. Transf. 94, 199-210 (2016).
• [18] B. Wang, C. Zhao, J. Therm. Sci. 111, 301-309 (2017).

Uwagi

EN

This work was supported by the National Science Centre, Poland under grant number 2016/21/D/ST8/01687.