Tytuł artykułu
Treść / Zawartość
Pełne teksty:
Identyfikatory
DOI
Warianty tytułu
Języki publikacji
Abstrakty
In the paper, the effect of the surface coating with palladium on hydrogen permeation of a Pd33Ni52Si15 amorphous alloy membrane was investigated. We have measured the hydrogen flow through the melt-spun amorphous membrane covered with palladium film of 10, 20, and 30 nm in thickness. Membranes have been tested in the temperature rage 294–358 K, and at pressure fixed at 102 kPa. We investigate the role of this film thickness on the activation energy for hydrogen permeability. It seemed that a relatively thin layer of the palladium on the surface of the membrane which contains over 30% of this element, should not considerably influence the permeability of the membrane for hydrogen. The membrane hydrogen permeability is correlated to permeation activation energy: the lower activation energy is, the higher permeability is observed. The activation energy for permeation strongly depends on palladium film thickness. The rapid increase of its value was recorded when the film thickness was growing up. As the result, the increase of the film thickness suppressed hydrogen permeability. Our findings are discussed in terms of a potential barrier between the two different phases.
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
173--179
Opis fizyczny
Bibliogr. 12 poz., rys.
Twórcy
autor
- Institute of Chemistry and Environmental Protection, Jan Długosz University of Częstochowa, Armii Krajowej 13/15, 42-200 Częstochowa, Poland
autor
- The Faculty of Microsystem Electronics and Photonics, Wrocław University of Science and Technology, Janiszewskiego 11/17, 50-372 Wrocław, Poland
autor
- The Faculty of Microsystem Electronics and Photonics, Wrocław University of Science and Technology, Janiszewskiego 11/17, 50-372 Wrocław, Poland
autor
- Institute of Physics, Jan Długosz University of Częstochowa, Armii Krajowej 13/15, 42-200 Częstochowa, Poland
Bibliografia
- [1] ITOH N., A membrane reactor using palladium, AIChE Journal 33(9), 1987, pp. 1576–1578.
- [2] GRYAZNOV V.M., Hydrogen permeable palladium membrane catalysts, Platinum Metals Review 30(2), 1986, pp. 68–72.
- [3] YANG J.Y., NISHIMURA C., KOMAKI M., Effect of overlayer composition on hydrogen permeation of Pd–Cu alloy coated V–15Ni composite membrane, Journal of Membrane Science 282(1–2), 2006, pp. 337–341.
- [4] SHIN-ICHI YAMAURA., AKIHISA INOUE, Effect of surface coating element on hydrogen permeability of melt-spun Ni40Nb20Ta5Zr30Co5 amorphous alloy, Journal of Membrane Science 349(1–2), 2010, pp. 138–144.
- [5] KIM K.B., KIM K.D., LEE D.Y., KIM Y.C., FLEURY E., KIM D.H., Hydrogen permeation properties of Pd-coated Ni60Nb30Ta10 amorphous alloy membrane, Materials Science and Engineering: A 449–451, 2007, pp. 934–936.
- [6] YAMAKAWA K., EGE M., LUDESCHER B., HIRSCHER M., KRONMÜLLER H., Hydrogen permeability measurement through Pd, Ni and Fe membranes, Journal of Alloys and Compounds 321(1), 2001, pp. 17–23.
- [7] PROCHWICZ W., STĘPIEŃ Z.M., Hydrogen permeation in Pd33Ni52Si15 amorphous alloy, Elektronika 8, 2011, pp. 19–20.
- [8] FUKAI Y., The Metal-Hydrogen System, Springer-Verlag, 2005.
- [9] ATKINS P., Physical Chemistry, Oxford University Press, 1998.
- [10] PROCHWICZ W., MACHERZYŃSKI W., PASZKIEWICZ B., STĘPIEŃ Z.M., Hydrogen permeation properties of Pd-coated Pd33Ni52 Si15 amorphous alloy membrane, Materials Science – Poland 33(1), 2015, pp. 56–58.
- [11] CHRISTMANN K., Interaction of hydrogen with solid surfaces, Surface Science Reports 9(1–3), 1988, pp. 1–163.
- [12] FUKAI Y., SUGIMOTO H., Diffusion of hydrogen in metals, Advances in Physics 34(2), 1985, pp. 263–326.
Uwagi
PL
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-2dfdab0d-5af3-4734-afc0-e6e8d2abb4d5