Effect of Thermal Treatment of Biomedical Ti-6Al-4V Alloy on Corrosion Resistance in Simulated Physiological Solutions

• Autorzy: Ryba J. , Kawalec M. , Tyrała E. , Krawiec H.

Identyfikatory

DOI

10.24425/amm.2019.131094

• Języki publikacji: EN

Abstrakty

EN

The effect of heat treatment on the corrosion resistance of Ti-6Al-4V alloy was investigated in the artificial saliva solution (MAS). It has been revealed that the thermal annealing treatment temperature favors the cathodic reactions and reduce the protective properties of passive film. The heat treatment causes the enrichment of β phase in vanadium. The lowest corrosion resistance in the artificial saliva revealed the Ti-6Al-4V alloy heated for 2 hours at 950°C. Heterogeneous distribution of vanadium within the β phase decreases the corrosion resistance of the Ti-6Al-4V.

Słowa kluczowe

EN

titanium alloys; corrosion; heat treatment; microstructure

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2020
• Tom: Vol. 65, iss. 1
• Strony: 39--45
• Opis fizyczny: Bibliogr. 17 poz., fot., rys., tab.

Twórcy

autor

Ryba J.

• AGH University of Science and Technology, Faculty of Foundry Engineering, 23 Reymonta Str., 30-059 Kraków, Poland

autor

Kawalec M.

• AGH University of Science and Technology, Faculty of Foundry Engineering, 23 Reymonta Str., 30-059 Kraków, Poland

autor

Tyrała E.

• AGH University of Science and Technology, Faculty of Foundry Engineering, 23 Reymonta Str., 30-059 Kraków, Poland

autor

Krawiec H.

• AGH University of Science and Technology, Faculty of Foundry Engineering, 23 Reymonta Str., 30-059 Kraków, Poland

Bibliografia

• [1] A. Łukaszewicz, M. Szota, Interational OCSCO World Press. 72, 58-66 (2015).
• [2] A. Bylica: J. Sieniawski, Tytan i jego stopy, Państwowe Wydawnictwo Naukowe, Warszawa (1985).
• [3] C. C. Chen, J. H. Chen, C. G. Chao, W. C. Say. J. Mater. Sci. 40, 4053-4059 (2005).
• [4] A. Choubey, R. Balasubramaniam, B. Basu. Journal of Alloys and Compounds 381, 288-294 (2004).
• [5] J.C.M. Souza, P. Ponthiaux, M. Henriques, R. Oliveira, W. Teughels. Journal of Dentistry 41, 528-34 (2013).
• [6] B. Sivakumar. S. Kumar, S. N. Sankara Narayanan. Wear. 270, 317-324 (2011).
• [7] I. Gurappa. Mater. Charact. 49, 73-79 (2002).
• [8] P. Flores-Álvarez, J. Rodríguez-Gómez, E. Onofre-Bustamante, J. Genescá-Llongueras, Surface & Coatings Technology 315, 498-508 (2017)
• [9] J. Loch, H. Krawiec, A. Łukaszczyk, J. Augustyn-Pieniążek, Achievements in Materials and Manufacturing Engineering 74(1), 29-30 (2016)
• [10] M. Głowacka, Metaloznawstwo, Wydawnictwo Politechniki Gdańskiej, Gdańsk (1996).
• [11] K. Oczoś, A. Kawalec, Kształtowanie metali lekkich, Wydawnictwo Naukowe PWN, Warszawa (2012).
• [12] Z. Cai, T. Shafer, I. Watanabe, E. M. Nunn, T. Okabe, Biomaterials 24, 213-218 (2003).
• [13] H. Krawiec, V. Vignal, E. Schwarzenboeck, J. Banaś. Electrochimica Acta 104, 400-406 (2013).
• [14] J. Ryba, H. Krawiec, M. Kawalec, E. Tyrała. Ochrona przed korozją, 61, 255-258 (2018).
• [15] J. Marciniak, J. Szewczenko, W. Kajzer, Archives of Metallurgy nad Materials 60, 2123-2129 (2015).
• [16] M. Tarnowski, K. Kulikowski, T. Borowski, B. Rajchel, T. Wierzchoń, Diamond & Related Materials 75, 123-130 (2017).
• [17] J. Morgiel, T. Wierzchoń, Surface & Coatings Technology 259, 473-482 (2014).

Uwagi

EN

1. This work was performed in the frame of contract no. 16.16.170.654.

PL

2. Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).