Metoda projektowania elementów ze zbrojonego ABK

• Autorzy: Vylegzhanin V. , Pinsker V.

Warianty tytułu

EN

Design method of reinforced autoclaved aerated concrete elements

• Języki publikacji: PL

Abstrakty

PL

W artykule przedstawiono metodę obliczania wytrzymałości, rysoodporności i odkształcalności elementów ze zbrojonego autoklawizowanego betonu komórkowego (ABK). Metoda została opracowana na podstawie wieloletnich doświadczeń i badań. Wyniki obliczeń wg tej metody są zgodne z wynikami uzyskiwanymi w badaniach.

EN

The article presents calculation method of flexural strength, crack resistance and deformation of reinforced autoclaved aerated concrete elements. The method was worked out based on many years of experiences and researches. Results of calculations according to this method are consistented with results obtained in researches.

Słowa kluczowe

PL

beton komórkowy; beton zbrojony; metoda projektowania; wytrzymałość na zginanie; rysoodporność

EN

autoclaved aerated concrete; reinforced concrete; designing method; bending strength; crack resistance

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Materiały Budowlane
• Rocznik: 2013
• Tom: nr 9
• Strony: 64--65
• Opis fizyczny: Bibliogr. 6 poz.

Twórcy

autor

Vylegzhanin V.

• Centrum Betonu Komórkowego, Petersburg

autor

Pinsker V.

• Centrum Betonu Komórkowego, Petersburg

Bibliografia

• [1] Pinsker V., 1980. Gradient to increase the strength of aerated concrete in the moment theory of elasticity and load-carrying capacity decks with double reinforcement. [In:] Study aerated concrete structures and their use in construction engineering. Leningrad, 49-64.
• [2] Pinsker V., 1983. Improving calculating methods of the strength of structures from autoclaved aerated concrete. [In:] Aerated concrete in construction engineering. Leningrad, 47-56.
• [3] Pinsker V., 1985. Work of aerated concrete structures on the transverse force and the formation of cracks. [In:] Design and calculation of building structures. Leningrad, 33-42.
• [4] Pinsker V., 1991. Problems of improvement the use and analysis autoclaved aerated concrete structures of for construction engineering. [In:] The application of aerated concrete in construction engineering. Leningrad, 45-52.
• [5] Standard of Builders Association of Russia. Design and construction of building envelope for residential and public buildings with the use of aerated concrete in the Russian Federation. STO 501-52-01-2007. Official publication. Moscow. 2008. The Center of aerated concrete. Vylegzhanin V., Pinsker V. Part I - 42, Part II - 55.
• [6] Regional standard. Design and construction of building envelope for residential and public buildings with the use of aerated concrete in St. Petersburg RMD 52-01-2007. Part II. Official publication. The administration of St. Petersburg. 2007. The Center of aerated concrete. Vylegzhanin V., Pinsker V.