Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Badanie włochatości przędz poliestrowo-wiskozowych. Cz. 1, Parametry procesu rozciągania
Języki publikacji
Abstrakty
The influences of drafting system parameters of a ring frame and yarn parameters on the hairiness of polyester-viscose blended yarns are examined. Samples of 80/20 polyester/ viscose blended yarns were produced by a SKF Lab Spinner and the hairiness was measured by a Shirley Yarn Friction/Hairiness Meter. Statistical analysis of the results show that yarn hairiness is significantly influenced by the drafting system angle, the overhang of the top delivery roller , the covering of the top delivery roller, the back zone setting, the break draft, the yarn count and yarn twist. Moreover, it was observed that the distance clips and top roller pressure do not have a significant effect on the yarn hairiness. The origin of the improving factors and decreasing factors of hairiness are discussed.
Badano wpływ parametrów przędzy oraz procesu jej rozciągania na włochatość. Badaniom poddano przędze mieszankowe (80% poliester / 20% wiskoza) wytworzone na przędzarce laboratoryjnej SKF Lab. Włochatość mierzono aparatem Shirley Yarn Friction/Hairiness Meter. Analiza statystyczna wyników pozwoliła stwierdzić, że na włochatość wpływają parametry przędzy tj. masa liniowa i skręt oraz parametry systemu rozciągania m. in. naddatek prędkości rolek zasilających, ustawienie poszczególnych rolek. Ponadto stwierdzono, że odległość między zaciskami i ciśnienie górnej rolki nie mają znaczącego wpływu na włochatość przędzy. Omówiono związki przyczynowo-skutkowe czynników zwiększających i obniżających włochatość.
Czasopismo
Rocznik
Strony
41--44
Opis fizyczny
Bibliogr. 14 poy., rys., tab.
Twórcy
autor
- Department of Textile Engineering, Amirkabir Univ. of Technology, Tehran, IRAN
autor
- Department of Textile Engineering, Amirkabir Univ. of Technology, Tehran, IRAN
autor
- Department of Textile Engineering, Amirkabir Univ. of Technology, Tehran, IRAN
Bibliografia
- 1. Pierce F. T., Text Res J, (1947) 17, p. 123.
- 2. Morton W. E., Yen K. C., Text Res J, (1952) 26, p. 325.
- 3. Barella A., Text Prog, (1983) 13(1) p.1.
- 4. Usta L., Canoglu S., Fibres & Textile in Eastern Europe, (2002), October, p.20.
- 5. Klein W., Short-staple spinning series, (The Textile Institute, UK), (1987) 4, pp. 6-38.
- 6. Das A., Yadav P., Ishtiaque S. M., Indian J Fibre Text Res, (2002) 27, p. 38.
- 7. Pillay K. P. R., Text Res J, (1964) 34, p. 783.
- 8. Barella A., Torn J., Vigo J. P., Text Res J., (1971) 41, p. 126.
- 9. Altaş S., Kadoğlu H., Fibres & Textile in Eastern Europe, (2006), 3(57), pp.4 8-51.
- 10. Goswami B. C., Text Res J, (1969) 39, p. 234.
- 11. Shirley Developments Ltd, Yarn Friction/Hairiness Tester, Catalog, 1997.
- 12. Haghighat E. A., M.S. thesis, Textile Engineering Department, Amirkabir University of Technology, Tehran, Iran (2005).
- 13. Merchant V. B. Text Res J, (1961) 31, p. 925.
- 14. Klein W., Short-staple spinning series, (The Textile Institute, UK), (1987) 3, p.1.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-2c891e8a-750b-4ac9-99e3-663855b8e202