Friction Weldability of UFG 316L Stainless Steel

• Autorzy: Skowrońska B. , Chmielewski T. , Pachla W. , Kulczyk M. , Skiba J. , Presz W.

Identyfikatory

DOI

10.24425/amm.2019.129494

• Języki publikacji: EN

Abstrakty

EN

The broad range applications of Ultra-Fine Grained metals is substantially limited by the lack of a welding method that allows them to be joined without losing the strong refinement of structure. From this point of view, the solid state welding processes are privileged. Friction welding tests were carried out on UFG 316L stainless steel. A joining process at high temperature activates the recrystallization, therefore the friction welding parameters were selected according to the criterion of the lowest degree of weakness due to recrystallization in the heat affected zone. In order to characterize the structure of basic material and selected areas of the obtained joint, were performed SEM, TEM and metallographic examinations in terms of hardness and range of softening of the material and tensile test. Despite the short time and relatively low welding temperature, results of the test by scanning electron microscopy and transmission electron microscopy confirmed the loss of the primary ultrafine structure in the Heat Affected Zone of welded joint.

Słowa kluczowe

EN

UFG metals; recrystallization; friction welding; weldability

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 3
• Strony: 1051--1058
• Opis fizyczny: Bibliogr. 30 poz., fot., rys., tab.

Twórcy

autor

Skowrońska B.

• Warsaw University of Technology, Faculty of Production Engineering, 85 Narbutta Str., 02-524 Warszawa, Poland

autor

Chmielewski T.

• Warsaw University of Technology, Faculty of Production Engineering, 85 Narbutta Str., 02-524 Warszawa, Poland

autor

Pachla W.

• Institute of High Pressure Physics, Polish Academy of Sciences (Unipress), 29 Sokołowska Str., 01-142 Warszawa, Poland

autor

Kulczyk M.

• Institute of High Pressure Physics, Polish Academy of Sciences (Unipress), 29 Sokołowska Str., 01-142 Warszawa, Poland

autor

Skiba J.

• Institute of High Pressure Physics, Polish Academy of Sciences (Unipress), 29 Sokołowska Str., 01-142 Warszawa, Poland

autor

Presz W.

• Warsaw University of Technology, Faculty of Production Engineering, 85 Narbutta Str., 02-524 Warszawa, Poland

Bibliografia

• [1] J. Górka, Study of structural changes in S700MC steel thermomechanically treated under the influence of simulated welding thermal cycles, Indian Journal of Engineering and Materials Sciences 22, 497-502, (2015).
• [2] J. Górka, Weldability of Thermomechanically Treated Steels Having a High Yield Point, Archives of Metallurgy and Materials 60 (1), 469-475 (2015).
• [3] M. Opiela, Elaboration of thermomechanical treatment conditions of Ti-V and Ti-Nb-V microalloyed forging steels. Archives of Metallurgy and Materials 59, 1181-1188 (2014),
• [4] S. J. Spachinger, W. Ernst, N. Enzinger, Influence of Ti on the toughness of the FGHAZ and the CGHAZ of high-strength mi-croalloyed S700MC steels. Weld World 61, 1117-1131 (2017).
• [5] W. Pachla, M. Kulczyk, A. Swiderska-Sroda, M. Lewandowska, H. Garbacz, A. Mazur, K. J. Kurzydłowski, Proc. of 9th Int. Conf, on Metal Forming EMRS 2006, Eds. N. Juster, A. Rosochowski, Publ. House Akapit 535-538 (2006).
• [6] J. Gubicza, M. El-Tahawy, Y. Huang, H. Choi, H. Choe, J. L. Labar, T. G. Langdon, Microstructure, phase composition and hardness evolution in 316L stainless steel processed by high-pressure torsion, Materials Science & Engineering A 657, 215-223 (2016).
• [7] P. de O. Silva, H. F. G. de Abreu, V. H. C. de Albuquerque, P. de Lima Neto, J.M.R.S. Tavares, Cold deformation effect on the microstructures and mechanical properties of AISI 301LN and 316L stainless steels, Materials and Design 32, 605-614 (2011).
• [8] W. Pachla, J. Skiba, M. Kulczyk, S. Przybysz, M. Przybysz, M. Wróblewska, R. Diduszko, R. Stępniak, J. Bajorek, M. Radomski, W. Fąfara, Nanostructurization of 316L type austenitic stainless steels by hydrostatic extrusion, Materials Science & Engineering A 615, 116-127. (2014)
• [9] W. Pachla, J. Skiba, M. Kulczyk, M. Przybysz, High-pressure equipment for cold severe plastic deformation working of materials. Metal Forming 26, 4, 283-306 (2015).
• [10] D. A. Hughes, N. Hansen, High angle boundaries formed by grain subdivision mechanisms. Acta Materialia 45 (9), 3871-3886 (1997).
• [11] A. Rosochowski, L. Olejnik, Numerical and physical modelling of plastic deformation in 2-turn equal channel angular extrusion. Journal of Materials Processing Technology 125-126, 309-316 (2002).
• [12] A. Rosochowski, W. Presz, L. Olejnik, et al. Micro-extrusion of ultra-fine grained aluminium. International Journal of Advaced Manufacturing Technolgy 33 (1-2), 137-146, (2007).
• [13] A. Azushima, R. Kopp, A. Korhonen, D. Y. Yang, F. Micari, G. D. Lahoti, P. Groche, J. Yanagimoto, N. Tsuji, A. Rosochowski, A. Yanagida, Severe plastic deformation (SPD) processes for metals. CIRP Annals - Manufacturing Technology (57), 716-735 (2008).
• [14] G. L. Lucas, F. W. Cooke, E. A. Friis, A Primer of Biomechanics, Springer Science+Business Media, New York, NY, 1999.
• [15] A. Świerczyńska, D. Fydrych, G. Rogalski, Diffusible hydrogen management in underwater wet self-shielded flux cored arc welding. International Journal of Hydrogen Energy 42 (38), 24532-24540 (2017).
• [16] B. Skowrońska, J. Szulc, T. Chmielewski, T. Sałaciński, R. Swiercz, Properties and microstructure of hybrid Plasma+MAG welded joints of thermomechanically treated S700MC steel, Proceedings of the 27th Anniversary International Conference on Metallurgy and Materials (METAL), Brno, Czech Republic, 25 May 2018.
• [17] J. Górka, S. Stano, Spawanie hybrydowe HLAW (wiązka lase-rowa - MAG) złączy teowych blach o grubości 10 mm ze stali S700MC. Welding Technology Review 89 (5), 28-34 (2017).
• [18] W. Radliński, Comparison of properties of welded joint of steel Domex 700 MC and Alform 700 M, Welding Technology Review 86 (9), 9-14 (2014).
• [19] A. Kurc-Lisiecka, A. Lisiecki, Laser Welding of the New Grade of Advanced High-Strength Steel Domex 960. Materials and Technology 51 (2), 199 (2017).
• [20] Ł. Morawiński, T. Chmielewski, L. Olejnik, G. Buffa, D. Campanella, L. Fratini, Welding abilities of UFG metals, AIP Conference Proceedings 1960 (1), 050012 (2018).
• [21] S. Malopheyev, S. Mironov, V. Kulitskiy, R. Kaibyshev, Friction-stir welding of ultra-fine grained sheets of Al-Mg-Sc-Zr alloy. Materials Science & Engineering A. 624, 132-139 (2015).
• [22] J.-Q. Su, T. W. Nelson, C. J. Sterling, Friction stir processing of large-area bulk UFG aluminum alloys, Scripta Materialia 52, 135-140 (2005).
• [23] V. Polyakova, S. Gabitova, I. Semenova, E. Yakushina, A. Rosochowski, Study of ultrafine grained Ti-6Al-4V linear friction welds. In: 2nd International Conf. on Recent Trends in Structural Materials, COMAT (2012), [Conf.Proc]:1-6.
• [24] B. Skowrońska, P. Siwek, T. Chmielewski, D. Golański, Zgrzewanie tarciowe ultradrobnoziarnistej stali 316L. Welding Technology Review 90 (5), 151-154 (2018)
• [25] P. Lacki, K. Wojsyk, K. Kudła, R. E. Śliwa, Friction welding of the bars made of aluminium and titanium alloys, ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering, e-Book Full Paperspp. 5029-5041 (2012).
• [26] J. Iwaszko, K. Kudła, K. Fila, Friction stir processing of the AZ91 magnesium alloy with SiC particles. Archives of Materials Science and Engineering 77 (2), 85-92 (2016).
• [27] T. Sałaciński, M. Winiarski, T. Chmielewski, R. Swiercz, Surface finishing using ceramic fibre brush tools, Proceedings of the 26th Anniversary International Conference on Metallurgy and Materials (METAL), Brno, Czech Republic, 26 May 2017.
• [28] P. Zifcak, P. Blazicek, P. Pastier, The effect of selected welding parameters on properties of FSW welded joints in ferritic steel type s235 JRC+N. Welding Technology Review 86 (11), 73-81 (2014).
• [29] J. Tomków, J. Łabanowski, D. Fydrych, G. Rogalski, Cold cracking of S460N steel welded in water environment. Polish Maritime Research 25 (3), 131-136 (2018).
• [30] E. Lo Valvo, L. Fratini, G. Buffa, D. Campanella, D. Baffari, Experimental and numerical investigation on a new FSW based metal to composite joining technique, Journal of Manufacturing Processes. (7), 1-7 (2018).

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).