The use of computer image analysis in determining material flow in the roller press compacting unit during compacting of fine-grained material

• Autorzy: Bembenek Michał
• Języki publikacji: EN

Abstrakty

EN

Mechanisms of fine-grained material flow in a roller press are a constant subject of research. The proper transfer of feed in the feeder has a significant influence on the correct course of the compaction and consolidation process, product quality, and the intensity of wear of the forming components. A few mathematical models of compaction process have been put forth, but they are focused mainly on loads in the compacting unit and consolidated material properties. During compaction the loose material properties including the Young module, the external and internal friction coefficient, and the side pressure coefficient change continuously. Therefore visualisation tests were carried out to survey the flow of material in a compaction unit equipped with rollers with a flat working surface and gravity feeder. Using the NI Vision Builder program, the recorded video observations were analyzed and the medium speed distribution of the material in the feeder was determined. The results were presented in the form of graphs and compared with one another, specifying the relationship between the material speed distribution and the press operation parameters.

Słowa kluczowe

EN

compaction; agglomeration; roller press; consolidation; fine-grained materials

• Wydawca: Wydawnictwa AGH
• Czasopismo: Computer Methods in Materials Science
• Rocznik: 2018
• Tom: Vol. 18, No. 2
• Strony: 58--63
• Opis fizyczny: Bibliogr. 23 poz., rys.

Twórcy

autor

Bembenek Michał

• AGH University of Science and Technology, al. Mickiewicza 30, 30-059 Kraków, Poland

Bibliografia

• Bembenek, M., 2018, Innowacje w konstrukcji i zastosowaniu pras walcowych, Rozprawy, Monografie – Akademia Górniczo-Hutnicza im. Stanisława Staszica, 337, Wydawnictwa AGH, Kraków (in Polish).
• Bembenek, M., 2017a, Badania i perspektywy nowych obszarów stosowania pras walcowych, Przemysł Chemiczny, 96, 9, 1845-1847.
• Bembenek, M., 2017b, Experimental analysis of consolidatedmn material flow through a roller press with a nonsymmetrical compaction unit, Journal of Machine Construction and Maintenance, 2, 117-122.
• Bembenek, M., Romanyshyn, T., 2018, Operation of Briquetting Roller Presses with an Asymmetrical Compaction Unit, ournal of Machine Construction and Maintenance, 2, 53-59.
• Bindhumadhavan, G., Seville, J.P.K., Adams, M.J., Greenwood, R.W., Fitzpatrick, S., 2005, Roll compaction of a pharmaceutical excipient: Experimental validation of rolling theory for granular solids, Chemical Engineering Science, 60, 3891 -3897.
• Borowski, G., Hycnar, J.J., 2013, Utilization of Fine Coal Waste as a Fuel Briquettes, International Journal of Coal Preparation and Utilization, 33, 4, 194-204.
• Flore, K., Schoenherr, M., Feise, H., 2009, Aspects of granulation in the chemical industry, Powder Technology, 189, 327-331.
• Gara, P., 2015, Badania procesu dwustopniowej granulacji drobnoziarnistych odpadów, Przemysł Chemiczny, 9, 1509-1511 (in Polish).
• Hryniewicz, M., 1997, Metoda doboru pras walcowych oraz opracowania założeń do ich modernizacji lub konstrukcji, Rozprawy, Monografie – Akademia Górniczo-Hutnicza im. Stanisława Staszica, 58, Wydawnictwa AGH, Kraków (in Polish).
• Hryniewicz, M., Bembenek M., 2017, Analysis of the producibility of mineral fertilizers from industrial waste, Journal of Research and Applications in Agricultural Engineering, 62, 1, 43-47.
• Hryniewicz, M., Gara, P., Bembenek, M., 2011, Modelowanie rozkładu nacisku jednostkowego w procesie kompaktowania materiału sypkiego, Automatyka, 15, 2, 175-182 (in Polish).
• Janewicz, A., Kosturkiewicz, B., 2006, Wizualizacja grawitacyjnego dozowania nadawy do prasy walcowej, Monografie Wydziału Inżynierii Mechanicznej i Robotyki AGH,32, 241-248 (in Polish).
• Johanson, J.R., 1965, A Rolling Theory for Granular Solids, Journal of Applied Mechanics, 32, 4, 842-848.
• Katashinskii, V.P., 1966, Analytical determination of specific pressure during the rolling of metal powders, Soviet Powder Metallurgy and Metal Ceramics, 5 (10), 765-772.
• Kleinebudde, P., 2004, Roll compaction/dry granulation: pharmaceutical applications, European Journal of Pharmaceutics and Biopharmaceutics, 58, 317-326.
• Kosturkiewicz, B., Janewicz, A., Hryniewicz, M., 2017, Granulacja dwustopniowa nawozów mineralnych, Przemysł Chemiczny, 96, 9, 1873-1876 (in Polish).
• Krok, A., Peciar, M., Fekete, R., 2014, Using the DPIV optical technique to measure the velocity of powder material in the space between the rollers in a roll compactor, Powder Technology, 262, 131-141.
• Lecompte, T., Doremus, P., Thomas, G., Perier-Camby, L., LeThiesse, J.C., Masteau, J.C. Debove, L., 2005, Dry granulation of organic powders—dependence of pressure 2Ddistribution on different process parameters, Chemical Engineering Science, 60, 3933-3940.
• Loginov, Yu. N., Babailov, N.A., Pervukhina, D.N., 2015,Physical modeling of roller pressing with asymmetric effects on compacted material, News of higher educational institutions, Black Metallurgy, 58, 186-191 (in Russian).
• Loginov, Yu. N., Bourkine, S. P., Babailov, N. A., 2001, Cinematics and volume deformations during roll press briquetting, Journal of Materials Processing Technology, 118, 151-157.
• Peter, S., Lammens, R.F., Steffens, K.J., 2010, Roller compaction/Dry granulation: Use of the thin layer model for predicting densities and forces during roller compaction, Powder Technology, 199, 165-175.
• Yehia, K.A., 2007, Estimation of roll press design parameters based on the assessment of a particular nip region, Powder Technology, 177, 148-153.
• Zinchuk, A.V., Mullarney, M. P., Hancock, B.C., 2004, Simulation of roller compaction using a laboratory scale compaction simulator, International Journal of Pharmaceutics, 269, 403-415

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019)