Application of Computer Support for Design of Shaft Furnaces – Cupolas

• Autorzy: Dajczer G. , Dańko R.

Identyfikatory

DOI

10.7494/jcme.2017.1.4.85

• Języki publikacji: EN

Abstrakty

EN

Designing a machine’s constructions and an object’s structures is one of the areas of technology design. The complexity of the structure is defined by the technology for which it is used. Following the theory of construction and mechanisms, the full characteristics of a machine or device is defined by its shape and operating parameters. The shape reflects geometry. As a result of using the correct parameters, the construction should functional correctly (which means according to its general principles of operation). The project of any structure is a creative process performed by a team of designers and constructors. The contemporary design is not solely based on the personal preferences of engineers. More and more scientific and computerized design methods are being introduced to this process. They are characterized as computer-aided systems and are based on algorithms, programs, and IT equipment. This article presents the methodological application of computer-aided design on an example of the design of shaft furnaces that are used in foundries as cast iron smelters. These furnaces, called cupolas, have again become objects of interest for research. In the design of the cupola construction, Autodesk Inventor techniques were used.

Słowa kluczowe

EN

cupola design; cupola; design; projects; design process

• Wydawca: AGH University of Science and Technology Press
• Czasopismo: Journal of Casting & Materials Engineering
• Rocznik: 2017
• Tom: Vol. 1, no. 4
• Strony: 85--89
• Opis fizyczny: Bibliogr. 5 poz., rys., wykr.

Twórcy

autor

Dajczer G.

• KPR PRODLEW-KRAKÓW Spółka z o.o., Alfreda Dauna 78, 30-629 Krakow, Poland

autor

Dańko R.

• AGH University of Science and Technology, Faculty of Foundry Engineering, Reymonta 23, 30-059 Krakow, Poland

Bibliografia

• [1] Wrona R., Stawowy A. & Macioł A. (2006). Podstawy inżynierii projektowania odlewni. Kraków: Pandit.
• [2] Autodesk. Autodesk Inventor 2015, software and tools applied to create cupola project.
• [3] Podrzucki C. & Szopa J. (1983). Piece i urządzenia metalurgiczne stosowane w odlewnictwie. Katowice: Wydawnictwo „Śląsk”.
• [4] Prodlew Oddział Kraków (1971). Wskaźniki technologiczne topialni (project). Kraków.
• [5] KPR Prodlew-Kraków Sp. z o.o. (2006). Project of cupola ø850 with chimney heater to reduce coke consumption. Kraków.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).