The influence of the mounting manner on thermal and optical parameters of power LEDs

• Autorzy: Górecki K. , Ptak P.
• Języki publikacji: EN

Abstrakty

EN

The paper refers to the investigation results concerning thermal and optical properties of power LEDs. The measuring-set to measure thermal and optical parameters of the considered semiconductor devices is described and some results of measurements of transient thermal impedance and illuminance emitted by power LEDs operating at different cooling conditions are presented. Investigations were performed both for LEDs operating solely and sets of such diodes situated on the common heat-sink.

Słowa kluczowe

EN

power LEDs; thermal parameter; optical parameters; measurements

PL

diody LED mocy; parametry cieplne; parametry optyczne; pomiary

• Wydawca: Lodz University of Technology. Department of Microelectronics and Computer Science
• Czasopismo: International Journal of Microelectronics and Computer Science
• Rocznik: 2015
• Tom: Vol. 6, nr 1
• Strony: 23--28
• Opis fizyczny: Bibliogr. 35 poz., 1 il., wykr.

Twórcy

autor

Górecki K.

• Department of Marine Electronics, Gdynia Maritime University, Gdynia, Poland

autor

Ptak P.

• Department of Marine Electronics, Gdynia Maritime University, Gdynia, Poland

Bibliografia

• [1] Craford M.G.: “Current State of the Art in High Brithness LEDs”. CTO American Physical Society, Solid State Lighting Session, 6 March 2007.
• [2] Czyżewski D.: “LED substitutes of conventional incandescent lamps”. Przegląd Elektrotechniczny, Vol. 88, No. 11a, 2012, pp.123-127.
• [3] Weir B.: “Driving the 21st Century’s Lights”. IEEE Spectrum, Vol. 49, No. 3, 2012, pp. 42-47.
• [4] Mroziewicz B.: „Biało-świecące diody LED rewolucjonizują technikę oświetleniową”. Elektronika, No. 9, 2010, pp. 145-154.
• [5] Krejcar O., Frischer R.: “Smart intelligent control of current source for high power LED diodes”. Microelectronics Journal, Vol. 44, 2013, pp.307-314.
• [6] Górecki K., Górecka K.: „Wpływ zjawisk cieplnych na właściwości diody LED mocy”. Przegląd Elektrotechniczny, Vol. 87, No. 7, 2011, pp. 144-147.
• [7] Górecki K.: “Electrothermal model of a power LED for SPICE”. International Journal of Numerical Modelling Electronic Network, Devices and Fields, Vol. 25, No. 1, 2012, pp. 39-45.
• [8] Uddin S., Shareef H., Mohamed A., Hannan M. A.: „Harmonics and thermal characteristics of low wattage LED lamps”. Przegląd Elektrotechniczny, Vol. 88, No. 11a, 2012, pp. 266-271.
• [9] Górecki K., Górecka K., Górecki P.: „Porównanie właściwości eksploatacyjnych wybranych typów lamp LED”. Przegląd Elektrotechniczny, Vol. 88, No. 11a, 2012, pp. 111-114.
• [10] Cheng Y.K., Cheng K.W.E.: “General Study for using LED to replace traditional lighting devices”. 2nd International Conference on Power Electronics Systems and Applications ICPESA '06, Hong Kong, 2006, pp. 173 - 177.
• [11] Górecki K.: “The influence of power supply voltage on exploitive parameters of the selected lamps”. Informacije MIDEM- Journal of Microelectronics, Electronic Components and Materials, Vol. 43, No. 3, 2013, pp. 193-198.
• [12] Narendran N., Gu Y.: “Life of LED-based white light sources”. Journal of Display Technology, Vol. 1, No. 1, 2005, pp. 167- 171.
• [13] Qin Y., Lin D., Hui S.Y.: “A simple method for comparative study on the thermal performance of LEDs and fluorescent lamps”. IEEE Transactions on Power Electronics, Vol. 24, 2009, No. 7, pp. 1811-1818.
• [14] Schubert E.F.: “Light-Emitting Diodes. Second Edition”. Cambridge University Press. New York, 2008.
• [15] Górecki K.: “Measurements of thermal resistance of power LEDs. Microelectronics International”. Vol. 31, No. 3, 2014, pp. 217-223.
• [16] Górecki K.: “The influence of mutual thermal interactions between power LEDs on their characteristics”. 19th International Workshop on Thermal Investigations of ICs and Systems Therminic, Berlin, 2013, pp. 188-193.
• [17] Jorda X., Perpina X., Vellvehi M., Hertog W., Peralvarez M., Carreras J: “Influence of different characterization parameters on the accuracy of LED board thermal model for retrofit bulbs”. 19th International Workshop on Thermal Investigations of ICs and Systems Therminic, Berlin, 2013, pp. 194-199
• [18] Poppe A., Farkas G., Szekely V., Horvath G., Rencz M.: “Multi-domain simulation and measurement of power LEDs and power LED assemblies”. Twenty-Second Annual IEEE Semiconductor Thermal Measurement and Management Symposium, Dallas, 2006, pp. 191-198.
• [19] Poppe A., Lasance C. J.M.: “On the standardization of thermal characterization of LEDs”. 25th IEEE Semi-Therm Symposium, 2009, pp.151- 158.
• [20] Székely V., Rencz M., Courtois B.: ”Thermal Investigations of ICs and Microstructures”, Sensors and Actuators; A Physical, Vol. A 71, No. 1- 2, 1998, pp. 1-2.
• [21] Bagnoli P.E., Casarosa C., Ciampi M., Dallago E.: “Thermal resistance analysis by induced transient (TRAIT) method for power electronic devices thermal characterization”. IEEE Trans. on Power Electronics, I. Fundamentals and Theory, Vol. 13, No. 6, 1998; pp. 1208-19.
• [22] Górecki K., Zarębski J.: „Badanie wpływu wybranych czynników na parametry cieplne tranzystorów mocy MOS”. Przegląd Elektrotechniczny, Vol. 85, No. 4, 2009, pp. 159-164.
• [23] Sarno C., Moulin G.: “Thermal management of highly integrated electronic packages in avionics applications”. Electronics Cooling, Vol. 7, No. 4, 2001, pp. 12-20.
• [24] Luksomierz precyzyjny L-100. Data sheet, Sonopan, http://www.sonopan.com.pl
• [25] Górecki K., Zarębski J.: „Estymacja parametrów modelu termicznego elementów półprzewodnikowych”. Kwartalnik Elektroniki i Telekomunikacji, Vol. 52, No. 3, 2006, pp. 347-360.
• [26] Blackburn D.L., Oettinger F.F.: “Transient Thermal Response Measurements of Power Transistors”, IEEE Transactions on Industrial Electronics and Control Instrumentation, Vol. IECI-22, No. 2, 1976, pp. 134-141.
• [27] Datasheet OF-HPW-5SL, www. tme.eu/pl/linecard/p/193,optoflash.html
• [28] Datasheet OF-HPW-3EL, www. tme.eu/pl/linecard/p/193,optoflash.html
• [29] Datasheet HPB8B-49K5WHB, www.hueyjann.com.tw
• [30] Datasheet LP9KLB, http://www.datasheetdir.com/LP9KLB-AS-NLS-S05+download
• [31] Górecki K., Rogalska M., Zarębski J.: “Parameter estimation of the electrothermal model of the ferromagnetic core”. Microelectronics Reliability, Vol. 54, No. 5, 2014, pp. 978-984, doi: j.microrel.2014.02.003.
• [32] Szekely V.: “A New Evaluation Method of Thermal Transient Measurement Results”. Microelectronic J., Vol. 28, No. 3, 1997, pp. 277-292.
• [33] Krames M.: “Progress and Future Direction of LED Technology”. 2003, [Online]. Available at: www.netl.doe.gov/ssl/PDFs/Krames.pdf.
• [34] Górecki K., Zarębski J.: “Paths of the heat flow from semiconductor devices to surrounding”. Proceedings of the 19th International Conference Mixed Design of Integrated Circuits and Systems MIXDES 2012, Warszawa, 2012, pp. 313-318.
• [35] Górecki K., Ptak P.: “The influence of the mounting manner of the power LEDs on its thermal and optical parameters”. Proceedings of the 21st International Conference Mixed Design of Integrated Circuits and Systems MIXDES, 2014, Lublin, pp. 303-308.