Nonwoven Carbon Fibers with Nanometric Metallic Layers as a Tool to Monitor Regenerative Processes

• Autorzy: Stodolak-Zych Ewa , Kudzin Marcin , Kornaus Kamil , Gubernat Maciej , Kaniuk E. , Bogun Maciej

Identyfikatory

DOI

10.24425/amm.2023.145487

• Języki publikacji: EN

Abstrakty

EN

Still unsolved is the problem of monitoring the tissue regeneration with the use of implants (substrates) in in vivo conditions. The multitude of implant materials combined with their specific immanent often limit standard diagnostic methods, i.e. X-rey or computer tomography (CT). This is particularly difficult in therapies using polymeric high-resistance substrates for tissue engineering. The aim of this study was to fabricate a non-woven carbon fiber composed of carbon fibers (CF) which were then subjected to a surface modification by magnetron sputtering. A layer of iron (Fe) was applied under inert conditions (argon) for different time periods (2-10 min). It was shown that already after 2-4 minutes of iron sputtering, the voxel surface (CF_Fe2’, CF_Fe4’) was covered with a heterogeneous iron layer observed by scanning electron microscope (SEM) with energy dispersive X-ray analysis (EDS). The longer the modification time, the more uniform the layer on the fiber surface becomes. This can be seen by the change in the wettability of the nonwoven surface which decreases from 131° for CF_Fe2 to 120° for CF_Fe10. The fibers do not change their geometry or dimensions (~11.5 um). The determination of pore size distribution by adsorption and desorption techniques (BJH) and specific surface area by nitrogen adsorption method (BET) have shown that the high specific surface area for the CF_Fe2’ fibers decreases by 10% with the increasing iron sputtering time. All the studied CF_Fe fibers show good biocompatibility with osteoblast-like cells MG-63 cells after both 3 and 7 days of culture. Osteoblasts adhere to the fiber surface and show correct morphology.

Słowa kluczowe

EN

activated carbon fibres; nanometric layers; magnetron sputtering; cell-material interaction

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2023
• Tom: Vol. 68, iss. 3
• Strony: 1151--1156
• Opis fizyczny: Bibliogr. 21 poz., fot., rys., tab.

Twórcy

autor

Stodolak-Zych Ewa

• AGH University of Science and Technology, Departament Biomaterials and Composites, Al. Mickiewicza 30, 30-059 Kraków, Poland

• https://orcid.org/0000-0002-8935-4811

autor

Kudzin Marcin

• Łukasiewicz - Lodz Institute of Technology, Łódź, Poland

• https://orcid.org/0000-0003-1161-8343

autor

Kornaus Kamil

• AGH University of Science and Technology, Departament Biomaterials and Composites, Al. Mickiewicza 30, 30-059 Kraków, Poland

• https://orcid.org/0000-0001-5762-7742

autor

Gubernat Maciej

• AGH University of Science and Technology, Departament Biomaterials and Composites, Al. Mickiewicza 30, 30-059 Kraków, Poland

• https://orcid.org/0000-0002-5424-1091

autor

Kaniuk E.

• AGH University of Science and Technology, Departament Biomaterials and Composites, Al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Bogun Maciej

• Łukasiewicz - Lodz Institute of Technology, Łódź, Poland

• https://orcid.org/0000-0001-7436-4219

Bibliografia

• [1] L. Qin, W.-F. Liu, X.-G. Liu, Y.-Z. Yang, L.-A. Zhang, New Carbon Mater. 35 (5), 459-485 (2020).
• [2] J.-S. Tsai, J. Polym. Res. 1 (4), 399-402 (1994).
• [3] Y.-C. Chiang, C.-C. Lee, H.-C. Lee, J. Porous. Mater. 14 (2), 227-237 (2007).
• [4] A. Sedghi, R.E. Farsani, A. Shokuhfar, J. Mater. Proces. Tech. 198 (1-3), 60-67 (2008).
• [5] A.-H. Lu, J.-T. Zheng, J. Colloid Interface Sci. 236 (2), 369-374 (2001).
• [6] H. Li, M. Liebscher, J. Yang, M. Davoodabadi, L. Li, Y. Du, B. Yang, S. Hempel, V. Mechtcherine, J. Clean. Prod. 368, 133093 (2022).
• [7] H. Li, M. Liebscher, I. Curosu, S. Choudhury, S. Hempel, M. Davoodabadi, Cem. Concr. Compos. 114, 103777 (2020).
• [8] M.F. Hassan, M.A. Sabri, H. Fazal, A. Hafeez, N. Shezad, M. Hussain, J. Anal. Appl. Pyrolysis. 145, 104715 (2020).
• [9] T. Weigel, J. Brennecke, J. Hansmann, Mater. 12 (6), 1378 (2021).
• [10] O.K. Alexeeva, V.N. Fateev, Int. J. Hydrogen Energy 41 (5), 3373-3386 (2016).
• [11] J. Frączyk, S. Magdziarz, E. Stodolak-Zych, E. Dzierzkowska, D. Puchowicz, I. Kamińska, M. Giełdowska, M. Boguń, Mater. 14 (12), 3198 (2021).
• [12] Lonza, ViaLight plus kit cell viability assay, 1-5 (2011).
• [13] Lonza, ToxiLightTM bioassay kit, 3-7 (2011).
• [14] S.M. Manocha, H. Patel, L.M. Manocha, J. Mater. Eng. Perform. 22 (2), 396-404 (2013).
• [15] J.R. Naik, M. Bikshapathi, R.K. Singh, A. Sharma, N. Verma, H.C. Joshi, A. Srivastava, Environ. Eng. Sci. 28 (12), 725-733 (2011).
• [16] A.A. Lysenko, Fiber Chem. 39, 93-102 (2007).
• [17] Y. Kohgo, K. Ikuta, T. Ohtake, Y. Torimoto, J. Kato, Int. J. Hematol. 88 (1), 7-15 (2008).
• [18] Q. Zuo, H. Zheng, P. Zhang, Y. Zhang, Langmuir. 38 (1), 253-263 (2022).
• [19] A. Tabet-Aoul, M. Mohamedi, Phys. Chem. 14, 4463e74 (2012).
• [20] Ł. Zych, A.M. Osyczka, A. Łacz, A. Różycka, W. Niemiec, A. Rapacz-Kmita, E. Dzierzkowska, E. Stodolak-Zych, Mater. 14 (4), 843 (2021).
• [21] E. Stodolak-Zych, P. Jeleń, E. Dzierzkowska, M. Krok-Borkowicz, Ł. Zych, M. Boguń, A. Rapacz-Kmita, B. Kolesińska, J. Mol. Struc. 1211, 128061 (2020).

Uwagi

The work was supported by the National Science Center OPUS 16 UMO project 2018/31/B/ST8/02418.