Influence of the Process Parameters on the Microstructure of a Hardfacing Coating Elaborated by Hot Isostatic Pressing

• Autorzy: Tellier A. , Ardigo-Besnard M. R. , Chateau-Cornu J.-P.

Identyfikatory

DOI

10.24425/amm.2019.126215

• Języki publikacji: EN

Abstrakty

EN

Hot Isostatic Pressing elaboration of Norem02, an austenitic-ferritic hypereutectoid stainless steel, leads to the formation of an austenitic matrix with a mixture of acicular M₇ C₃ and globular M₂₃ C₆ carbides. The sintering tests, carried out by using an AISI 304L container, showed that the final microstructure and the carbides’ distribution of the HIPed Norem02 are strongly influenced by the process parameters (heating and cooling rate, sintering time, holding temperature and pressure) and by the particles’ size, microstructure and phase distribution of the initial powder. The morphological, crystallographic and chemical analysis of the sintered samples were completed by comprehension of the diffusion phenomena at the Norem02/304L interface, enabling the establishment of a correlation between elaboration process and final microstructure.

Słowa kluczowe

EN

powder metallurgy; hot isostatic pressing; high carbon steel; microstructure; hardfacing coating

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 1
• Strony: 33--38
• Opis fizyczny: Bibliogr. 19 poz.,fot., rys., tab.

Twórcy

autor

Tellier A.

• Laboratoire Interdisciplinaire Carnot de Bourgogne (ICB), UMR 6303 CNRS – Université de Bourgogne-Franche-Comté, Bp 47870, 21078 Dijon Cedex, France

autor

Ardigo-Besnard M. R.

• Laboratoire Interdisciplinaire Carnot de Bourgogne (ICB), UMR 6303 CNRS – Université de Bourgogne-Franche-Comté, Bp 47870, 21078 Dijon Cedex, France

autor

Chateau-Cornu J.-P.

• Laboratoire Interdisciplinaire Carnot de Bourgogne (ICB), UMR 6303 CNRS – Université de Bourgogne-Franche-Comté, Bp 47870, 21078 Dijon Cedex, France

Bibliografia

• [1] H. Ocken, Surf. Coat. Technol. 76, 456-461 (1995).
• [2] Ek. Ohriner, T. Wada, E. P. Whelan, H. Ocken, Metall. Trans. 22 (5), 983-991 (1991).
• [3] G. Beaurin, J.-P. Mathieu, E. Gauthier, D. Nelias, M. Coret, F. Arnoldi, Mater. Sci. Eng. A. 528 (15), 5096-5105 (2011).
• [4] D. H. Persson, S. Jacobson, S. Hogmark, Wear 255 (1-6), 498-503 (2003).
• [5] G. A. Fontalvo, R. Humer, C. Mitterer, K. Sammt, I. Schemmel, Wear 260 (9-10), 1028-1034 (2006).
• [6] A. Dalmau, C. Richard, A. Igual-Muñoz, Tribol. Int. 121, 167-179 (2018).
• [7] V. Viswanathan, T. Laha, K. Balani, A. Agarwal, S. Seal, Mater. Sci. Eng. R Rep. 54 (5-6), 121-285 (2006).
• [8] H. V. Atkinson, S. Davies, Metallurgical and Materials Transactions A. 31 (12), 2981-3000 (2000).
• [9] D. M. Escriba, E. Materna-Morris, R. L. Plaut, A. F. Padilha, Mater. Charact. 60 (11), 1214-1219 (2009).
• [10] J. Michalska, M. Sozańska, Mater. Charact. 56 (4-5), 355-362 (2006).
• [11] I. Calliari, M. Zanesco, E. Ramous, J. Mater. Sci. 41 (22), 7643-7649 (2006).
• [12] N. Llorca-Isern, H. López-Luque, I. López-Jiménez, M. V. Biezma, Mater. Charact. 112, 20-29 (2016).
• [13] K. Wieczerzak, P. Bala, M. Stepien, G. Cios, T. Koziel, Mater. Des. 94, 61-68 (2016).
• [14] K. Wieczerzak, A. Żywczak, J. Kanak, P. Bała, Mater. Charact. 132, 293-302 (2017).
• [15] C. Garcı́a de Andrés, G. Caruana, L. Alvarez, Mater. Sci. Eng. A. 241 (1-2), 211-215 (1998).
• [16] E. L. Hall, C. L. Briant, Metall. Trans. A. 15 (5), 793-811 (1984).
• [17] T. Thorvaldsson, G. L. Dunlop, J. Mater. Sci. 18 (3), 793-803 (1983).
• [18] P. de Lima-Neto, J. P. Farias, L.F.G. Herculano, H. C. de Miranda, W. S. Araújo, J.-B. Jorcin, N.e Pébère, Corros. Sci. 50 (4), 1149-1155 (2008).
• [19] T. Takei, M. Yabe, F.-G. Wei, Corros. Sci. 122, 80-89 (2017).

Uwagi

EN

1. The authors would like to thank the Bourgogne-Franche-Comté Region for financing part of this study and FRAMATOME which finances the Chair in which this program is included.

PL

2. Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).