PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Corrosion protection of 316L stainless steel by (PVDF/HA) composite coating using a spinning coating technique

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Polymer coatings are increasingly used in varied fields and applications from simple coatings of barrier to intricated nanotechnology based composite. In the present study, polyvinylidene fluoride(PVDF)/Hydroxyapatite (HA )coatings were produced by spin coating technique over 316L SS. Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) were used to observe the coated 316L SS substrates surface morphology. The corrosion protection efficiency of pure polyvinylidene fluoride and polyvinylidene fluoride/HA nanocomposite coatings on 316L SS was inspected using potentiodynamic polarization along with the ions release techniques in Hank’s solution. A superior biocompatibility and an improved protection performance against corrosion were obtained for the 316L SS samples with nanocomposite coatings compared with the pure polyvinylidene fluoride coatings and pristine 316L SS counterparts. The 316L SS samples coated by PVDF/HA nanocomposite showed enhanced corrosion protection within Hank’s solution. The corrosion of 316L SS samples within Hank’s solution increased from 92.99% to 99.99% when using 3wt% HA due to increasing the PVDF inhibition efficiency. Good agreements in the electrochemical corrosion parameters were obtained from using ions release and potentiodynamic polarization tests.
Rocznik
Strony
art. no. e136810
Opis fizyczny
Bibliogr. 23 poz., rys., tab.
Twórcy
  • College of Materials Engineering, Polymer and Petrochemical Industries Department, Babylon University, Iraq
  • College of Materials Engineering, Metallurgical Engineering department, Babylon University, Iraq
  • College of Materials Engineering, Polymer and Petrochemical Industries Department, Babylon University, Iraq
Bibliografia
  • [1] H. Hermawan, D. Ramdan, and J.R.P. Djuansjah, Metals for Biomedical Applications, ch. 17, Faculty of Biomedical Engineering and Health Science, University Teknologi Malaysia, 2011.
  • [2] Y. Okazaki, E. Gotoh, T. Manabe, and K. Kobayashi, “Comparison of metal concentrations in rat tibia tissues with various metallic implants”, Biomaterials 25, 5913–5920 (2004), doi: 10.1016/j.biomaterials.2004.01.064.
  • [3] T. Tański, W. Matysiak, D. Kosmalska, and A. Lubos, “Influence of calcination temperature on optical and structural properties of TiO2 thin films prepared by means of sol-gel and spin coating”, Bull. Pol. Acad. Sci. Tech. Sci. 66(2), 151‒156 (2018).
  • [4] J.R. Smith and D.A. Lamprou, “Polymer coatings for biomedical applications: a review”, Trans. IMF 92(1), 9‒19 (2014).
  • [5] M. Srimathi, R. Rajalakshmi, and S. Subhashini, “Polyvinyl alcohol–sulphanilic acid water soluble composite as corrosion inhibitor for mild steel in hydrochloric acid medium”, Arab. J. Chem. 7(5), 525‒855 (2014).
  • [6] B.P. Singh, B.K. Jena, S. Bhattacharjee, and L. Besra, “Development of oxidation and corrosion resistance hydrophobic graphene oxide-polymer composite coating on copper”, Surf. Coat. Technol. 232(15), 475‒481 (2013).
  • [7] S. Rajendran, S.P. Sridevi, N. Anthony, A.A. John, and M. Sundearavadivelu, “Corrosion behaviour of carbon steel in polyvinyl alcohol”, Anti-Corros. Methods Mater. 52, 102‒107 (2005).
  • [8] A.H. Asra and H.S. Ohood, “Preparation and Facilitation Of Antibactirial Activity, Hydrophilicity Of Piezo–PVDF/n-MgO Film By Electro-Spinning and Spin Coated For Wound Dressing: A Comparative Study”, J. Mech. Eng. Res. Develop. (JMERD) 42(4), 23‒31 (2019).
  • [9] N. Maqsood, A. Khan, M.K. Alamgir, S.A. Shah, and M.Fahad, “PTFE Thin Film Coating on 316L Stainless Steel for Corrosion Protection in Acidic Environment”, J. Eng. Appl. Sci. 36(1), 183‒190 (2017).
  • [10] J. Blitstein and D. Kathrein, “Corrosion-Resistant coating Composition Containing Hollow Microballoons”, US Patent US4374874A, Dec. 22, 1981
  • [11] S. Vidhate, A. Shaito, J. Chung, and N.A. D’Souza, “Crystallization, mechanical, and rheological behavior of polyvinylidene fluoride/carbon nanofiber composites”, J. Appl. Polym. Sci. 112, 254–260 (2009).
  • [12] J. Ma, J. Zhao, Z. Ren, and L. Li, “Preparation and characterization of PVDF-PFSA flat sheet ultrafiltration membranes”, Front. Chem. Sci. Eng. 6, 301–310 (2012).
  • [13] S. Liang, Y. Kang, A. Tiraferri, E.P. Giannelis, X. Huang, and M. Elimelech, “Highly hydrophilic polyvinylidene fluoride (PVDF) ultrafiltration membranes via postfabrication grafting of surface-tailored silica nanoparticles”, ACS Appl. Mater. Interfaces 5, 6694‒6703 (2013).
  • [14] V.F. Cardoso, D.M. Correia, and C. Ribeiro, “Review: Fluorinated Polymers as Smart Materials for Advanced Biomedical Applications”, Polymers 10, 161 (2018) doi: 10.3390/polym10020161
  • [15] C.T. Kwok, P.K. Wong, F.T. Cheng, and H.C. Man, “Characterization and corrosion behaviour of hydroxyapatite coating on Ti6Al4V fabricated by electrophoretic deposition”, Appl. Surf. Sci. 7, 6736–6744 (2009).
  • [16] J. Zhu, X. Chen, J. Wang, and W. Chen, “Hydroxyapatite/β-tricalcium phosphate composite for guiding bone tissue growth into a titanium tube in 8 mm dog tibia cavity defects”, J. Wuhan Univ. Technol.-Mater. Sci. Ed. 31, 468–473 (2016).
  • [17] R. Raja, S. Jannet, and M.A. Thampy, “Synthesis and characterization of AA5083 and AA2024 reinforced with SiO2 particles”, Bull. Pol. Acad. Sci. Tech. Sci. 66(2), 127‒132 (2018).
  • [18] N.M. Dawood, “Preparation And Characterization of Bio Nitinol With Addition of Copper”, Ph. D. thesis, Materials Engineering Department, University Of Technology, Iraq, 2014.
  • [19] F. Gebhardt, S. Seuss, M.C. Turhan, H. Hornberger, S. Virtanen, and A.R. Boccaccini, “Characterization of electrophoretic chitosan coatings on stainless steel”, Mater. Lett. 66, 302–304 (2012).
  • [20] E. Husain, A. Abdel Nazeer, J. Alsarraf, K. Al-Awadi, M. Murad, and A. Al-Naqi, A. Shekeban,Corrosion behavior of AISI 316 stainless steel coated with modified fluoropolymer in marine condition, J. Coat. Technol. Res. 302–304 (2018).
  • [21] L. Sun and C.C. Berndt, “Characterization and Mechanical Properties of Flame Sprayed Hydroxyapatitel Polymer Composite Coatings”, in Thermal Spray 2001: New Surfaces for a New Millennium, Eds. C.C. Berndt, K.A. Khor, and EX Lugscheider, ASM International, Materials Park, Ohio, USA, 2001.
  • [22] A.K. Rajih, N.M. Dawood, and F. Rasheed, “Corrosion Protection of 316 L Stainless Steel by HA Coating Via Pulsed Laser Deposition Technique”, J. Eng. Appl. Sci. 13(24), 10221‒10231 (2018).
  • [23] H.-F. Guo, Z.-S. Li, S.-W. Dong, W.-J. Chen, L. Deng, Y.-F. Wang, and D-J. Ying, “Piezoelectric PU/PVDF electrospun scaffolds for wound healing applications”, Colloid Surf. B-Biointerfaces 96, 29–36 (2012).
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-2b21009c-be21-4e0f-b1ca-5c0878340b9c
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.