Comprehensive analysis of the product’s operational properties formation considering machining technology

• Autorzy: Stupnytskyy Vadym , Hrytsay Ihor

Identyfikatory

DOI

10.24425/ame.2020.131688

• Języki publikacji: EN

Abstrakty

EN

Product Lifecycle Management (PLM) system requires consideration and ensuring efficient operating conditions for the most loaded parts in the product, not only at the product’s design stage, but also at the production stage. Operational properties of the product can be significantly improved if we take into consideration the formation of the functional surfaces wear resistance parameters already at the planning stage of the technological process structure and parameters of the product’s machining. The method of constructing predictive models of the influence of the technological process structure on the formation of a complex of product’s operational properties is described in the article. The relative index of operational wear resistance of the machined surface, which is characterized by the use of different variants of the structure and parameters of this surface treatment, depends on the microtopographic state of the surface layer and the presence of cutting-induced residual stress. On the example of the eject pin machining it has been shown how the change in the structure of the manufacturing process from grinding to the turning by tool with the tungsten carbide insert affects the predicted wear resistance of the machined functional surface.

Słowa kluczowe

EN

functional-oriented technology; operational properties; wear resistance; friction; tribo-contact; profile roughness parameters

PL

technologia zorientowana na funkcjonalność; właściwości operacyjne; odporność na zużycie; tarcie; trybokontakt; parametry profilu chropowatości

• Wydawca: Komitet Budowy Maszyn PAN
• Czasopismo: Archive of Mechanical Engineering
• Rocznik: 2020
• Tom: LXVII, nr 2
• Strony: 149--167
• Opis fizyczny: Bibliogr. 32 poz., rys., tab., wykr.

Twórcy

autor

Stupnytskyy Vadym

• Department of Mechanical Engineering Technologies, Institute of Engineering Mechanics and Transport, Lviv Polytechnic National University, Lviv, Ukraine.

autor

Hrytsay Ihor

• Department of Mechanical Engineering Technologies, Institute of Engineering Mechanics and Transport, Lviv Polytechnic National University, Lviv, Ukraine.

Bibliografia

• [1] V. Stupnytskyy and I. Hrytsay. Computer-aided conception for planning and researching of the functional-oriented manufacturing process. In: Tonkonogyi V. et al. (eds), Advanced Manufacturing Processes, part of the Lecture Notes in Mechanical Engineering, pages 309–320, Springer, Cham, 2020. doi: 10.1007/978-3-030-40724-7_32.
• [2] J.P. Davim. Surface Integrity in Machining. Springer, London, 2010. doi: 10.1007/978-1-84882-874-2.
• [3] W.E. Eder. Theory of technical systems – educational tool for engineering. Universal Journal of Educational Research, 4(6):1395–1405, 2016. doi: 10.13189/ujer.2016.040617.
• [4] R.M. Rangan, S.M. Rohde, R. Peak, B. Chadha, and P. Bliznakov. Streamlining product lifecycle processes: a survey of product lifecycle management implementations, directions, and challenges. Journal of Computing and Information Science in Engineering, 5(3):227–237, 2005. doi:10.1115/1.2031270.
• [5] F. Demoly, O. Dutartre, X.-T. Yan, B. Eynard, D. Kiritsis, and S. Gomes. Product relationships management enabler for concurrent engineering and product lifecycle management. Computers in Industry, 64(7):833–848, 2013. doi: 10.1016/j.compind.2013.05.004.
• [6] V. Stupnytskyy. Computer aided machine-building technological process planning by the methods of concurrent engineering. Europaische Fachhochschule: Wissenschaftliche Zeitschrift, ORT Publishing, 2:50–53, 2013.
• [7] A.I. Dmitriev, A.Yu. Smolin, V.L. Popov, and S.G. Psakhie. A multilevel computer simulation of friction and wear by numerical methods of discrete mechanics and a phenomenological theory. Physical Mesomechanics, 12(1-2):11–19, 2009. doi: 10.1016/j.physme.2009.03.002.
• [8] T.R. Thomas. Rough Surfaces, 2nd edition. Imperial College Press, London, 1998. doi: 10.1142/p086.
• [9] G. Straffelini. Friction and Wear: Methodologies for Design and Control. Springer, Cham, 2015. doi: 10.1007/978-3-319-05894-8.
• [10] H. Aramaki, H.S. Cheng, and Y. Chung. The contact between rough surfaces with longitudinal texture – part I: average contact pressure and real contact area. Journal of Tribology, 115(3):419–424, 1993. doi: 10.1115/1.2921653.
• [11] Yu A. Karpenko and A. Akay. A numerical model of friction between rough surfaces. Tribology International. 34:531–545, 2001. doi: 10.1016/S0301-679X(01)00044-5.
• [12] N.B. Dyomkin. Calculation and experimental study of rough contact surfaces. In Proceedings of Science Conference “Contact Problems and Their Engineering Applications”, pages 264–271, Moscow, 1969.
• [13] J. Luo, Y. Meng, T. Shao and Q. Zhao, (eds). Advanced Tribology: Proceedings of CIST2008 & ITS-IFToMM-2008. Beijing, China, 2008; Spriner, 2010. doi: 10.1007/978-3-642-03653-8.
• [14] H. Hirani. Fundamentals of Engineering Tribology with Applications. Cambridge University Press, 2016.
• [15] B. Bhushan. Introduction to Tribology. John Wiley & Sons, 2013.
• [16] K.C. Ludema. Friction, Wear, Lubrication. A Textbook in Tribology. CRC Press, 1996.
• [17] B.N.J. Persson. Sliding Friction: Physical Principles and Applications. Springer Science & Business Media, 2013.
• [18] N.B. Dyomkin. Contacting of Rough Surfces. Moskow: Nauka, 1970. (in Russian).
• [19] J.A. Greenwood and G. Williamson. Contact of nominally flat surfaces. In Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 295(1442):300–319, 1966. doi: 10.1098/rspa.1966.0242.
• [20] S. Andersson and U. Olofsson. Simulation of plastic deformation and wear of a rough surface rubbing against a smooth wear resistant surface. In Proceedings of the 10th International Conference on Tribology, Bukharest, Romania, 2007.
• [21] A. Ishlinsky and F. Chernousko. Advances in Theoretical and Applied Mechanics. Moskow: Mir, 1981.
• [22] K. Hill. The Matematical Theory of Plasticity. Clarendon Press, Oxford, 1998.
• [23] L.I. Sedov (ed.). Foundations of the Non-Linear Mechanics of Continua, volume 1 of International Series of Monographs in Interdisciplinary and Advanced Topics in Science and Engineering, 1966. doi: 10.1016/C2013-0-07842-5.
• [24] A. Chmiel. Finite element simulation methods for dry sliding wear. M.Sc. Thesis, Air Force Institute of Technology. Wright-Patterson Air Force Base, Ochio, USA, 2008.
• [25] M.W. Fu, M.S. Yong, and T. Muramatsu. Die fatigue life design and assessment via CAE simulation. The International Journal of Advanced Manufacturing Technology, 35(9–10): 843–851, 2008. doi: 10.1007/s00170-006-0762-5.
• [26] I.V. Kragelsky, M.N. Dobychin, and V.S. Kombalov. Friction and Wear: Calculation Methods. Pergamon Press, Oxford, 1982.
• [27] D.R. Askeland. The Science and Engineering of Materials. 3rd edition: Springer Science & Business Media, Oxford, 1996. doi: 10.1007/978-1-4899-2895-5.
• [28] V.P. Astachov. Tribology of Metal Cutting, volume 52 of Tribology and Interface Engineering Series. Elsevier Science, Amsterdam, 2006. doi: 10.1016/s0167-8922(06)x8001-x.
• [29] V. Stupnytskyy. A generalized example of structural and parametric optimization of functionallyoriented process. Bulletin of the National Technical University “KhPI”. Series: Techniques in a machine industry. 42(1085):116–130, 2014.
• [30] Z. Nazarchuk, V. Skalskyi, O. Serhiyenko. Acoustic Emission. Methodology and Application. Springer, Cham, 2017. doi: 10.1007/978-3-319-49350-3.
• [31] V. Stupnytskyy and I. Hrytsay I. Simulation study of cutting-induced residual stress. In: Ivanov V. et al. (eds), Advances in Design, Simulation and Manufacturing II. DSMIE 2019, part of Lecture Notes in Mechanical Engineering, pages 341–350, 2020. doi: 10.1007/978-3-030-22365-6_34.
• [32] Y. Kudryavtsev and J. Kleiman. Ultrasonic technique and device for residual stress measurement. In T. Proulx (ed.), Engineering Applications of Residual Stress, volume 8 of Conference Proceedings of the Society for Experimental Mechanics Series. Springer, New York, 2011. doi: 10.1007/978-1-4614-0225-1_8.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).