Sintering Behavior and Mechanical Property of Cu-Sn Alloy with Ag Addition Produced by Pulsed Electric Current Sintering

• Autorzy: Lee Se Hwan , Ahn Byungmin

Identyfikatory

DOI

10.24425/amm.2022.141077

• Języki publikacji: EN

Abstrakty

EN

This work mainly focuses on the sintering behavior of the Cu-Sn alloy with the addition of Ag up to 4 wt% after pulsed electric current sintering (PECS) process for ultra-fast sintering. The microstructural evolution was characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), and density measurements. The mechanical properties were evaluated via measurements of transverse rupture strength (TRS) and Rockwell hardness. The mechanism during the sintering process has been discussed thoroughly, and the effect on porosity with the addition of the Ag is also correlated. The results showed that the growth of porosity progressed with the amount of Ag up to 2 wt%, and further addition of Ag leads reduction in porosity. The effect on mechanical properties were improved slowly as the amount of Ag increased.

Słowa kluczowe

EN

powder metallurgy; Cu-Sn alloy; pulsed electric current sintering; grinding tool

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2022
• Tom: Vol. 67, iss. 4
• Strony: 1475--1479
• Opis fizyczny: Bibliogr. 17 poz., fot., rys.

Twórcy

autor

Lee Se Hwan

• Ajou University, Department of Materials Science and Engineering and Department of Energy System Research, Suwon, 16499, Korea

• https://orcid.org/0000-0001-6775-8949

autor

Ahn Byungmin

• Ehwa Diamond Industrial Co., Ltd., Osan, 18145, Korea

• https://orcid.org/0000-0002-0866-6398

Bibliografia

• [1] T. Bergs, U. Müller, F. Vits, S. Barth, Diam. Relat. Mater. 108, 107930 (2020).
• [2] D. Setti, S. Ghosh, P.V. Rao, Wear 382-383, 71 (2017).
• [3] M. Tóth, N.D. Sims, D. Curtis, Procedia CIRP 82, 214 (2019).
• [4] E.E. Ibrahim, M. Checkley, X. Chen, M. Sharp, W. Liang, S. Yuan, A.D.L. Batako, Procedia Manuf. 30, 530 (2019).
• [5] P.A. Loginov, D.A. Sidorenko, E.A. Levashov, M.I. Petrzhik, M.Y. Bychkova, L. Mishnaevsky Jr., Int. J. Refract. Hard Met. 71, 36 (2018).
• [6] J.-W. Peng, F.-L. Zhang, Y.-J. Huang, J.-M. Liu, K.-J. Li, ­Y.-M. Zhou, Y. Long, C.-Y. Wang, S.-H. Wu, H.-Q. Tang, Ceram. Int. 47, 32736 (2021).
• [7] Y. Li, H. Zhou, C. Wu, Z. Yin, C. Liu, Y. Huang, J. Liu, Z. Shi, Metals 11, 196 (2021).
• [8] A. Seleznev, N.W.S. Pinargote, A. Smirnov, Metals 11, 1385 (2021).
• [9] R. Sayyadi, F. Khodabakhshi, N.S. Javid, G. Khatibi, J. Mater. Res. Technol. 9, 8953(2020).
• [10] Z. Zhang, C. Wei, H. Cao, Y. Zhang, Materials 12, 4127 (2019).
• [11] S. Guo, C. Ng, C.T. Liu, J. Alloys Compd. 557, 77 (2013).
• [12] C.-S. Oh, J.-H. Shim, B.-J. Lee and D.N. Lee, J. Alloys & Compds. 238, 155 (1996).
• [13] M.S. Mousavi, R. Abbasi, S.F. Kashani-Bozorg, Metall. Mater. Trans. A 47, 3761 (2016).
• [14] Y. Grosu, L. González-Fernández, U. Nithiyanantham, A. Faik, Energies 12, 3765 (2019).
• [15] R. Collet, S.L. Gallet, F. Charlot, S. Lay, J.-M. Chaix, F. Bernard, J. Manuf. Mater. Process. 5, 119 (2021).
• [16] N. Eustathopoulos, Metals 5, 350 (2015).
• [17] S. Zhang, K. Zhou, H. Ding, J. Guo, Q. Liu, W. Wang, Materials 11, 2293 (2018)

Uwagi

1. This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. 2021R1A2C1005478).

2. Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).