Laboratory study of stilling basin using trapezoidal bed elements

• Autorzy: Al-Fatlawi Thair J.M. , Al-Mansori Nassrin J.H. , Othman Nariman Y.

Identyfikatory

DOI

10.22630/PNIKS.2020.29.4.35

• Języki publikacji: EN

Abstrakty

EN

When designing dam spillway structures, the most significant consideration is the energy dissipation arrangements. Different varieties of baffle blocks and stilling basins have been used in this context. However, the hydraulic jump form of stilling basin is considered to be the most suitable. The main objective of this research was to introduce four different baffle block shapes (models arranged from A to D, installed at slopes 0.00, 0.04, 0.06 and 0.08 in the stilling basins). To illustrate the consequences for the qualities of pressure-driven bounce, each model was attempted in the bowl. The trials applied Froude numbers between 6.5 and 9.2. The puzzle square model D provided the best outcomes compared to the models A, B, C and smooth. Model D with different models at inclines 0.00, 0.04, 0.06 and 0.08 was used to consider the impacts of perplex hinders on water driven-bounce when bed slants were changed. When the model D baffle used instead of a smooth bed at 0.08 slope, the reduction in y₂ / y₁ reached 12.8%, and L_j / y₁ was 18.9%. Among the different bed slopes, a normal decrease in y₂ / y₁ ranged from approximately 10.3%, whereas the normal decrease in L_j / y₁ was about 13.8% when the model D baffle was used instead of the model A baffle with a horizontal slope bed of 0.00. The results show that the new shapes led to a decrease in sequent profundity proportion and length of jump proportion; however, the energy dissipation proportion increased.

Słowa kluczowe

EN

baffle blocks; stilling basin; energy dissipation; spillway; hydraulic jump

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Przegląd Naukowy Inżynieria i Kształtowanie Środowiska
• Rocznik: 2020
• Tom: Vol. 29, No. 4
• Strony: 409--420
• Opis fizyczny: Bibliogr. 23 poz., rys., tab., wykr., zdj.

Twórcy

autor

Al-Fatlawi Thair J.M.

• University of Babylon, College of Engineering, Department of Civil Engineering, Babylon, 00964, Iraq

autor

Al-Mansori Nassrin J.H.

• University of Babylon, College of Engineering, Department of Environmental Engineering, Babylon, 00964, Iraq

autor

Othman Nariman Y.

• University of Babylon, College of Engineering, Department of Civil Engineering, Babylon, 00964, Iraq

Bibliografia

• Abbas, A., Alwash, H. & Mahmood, A. (2018). Effect of baffle block configuproportionns on characteristics of hydraulic jump in adverse stilling basins. MATEC Web of Conferences, 162, 03005. https://doi.org/10.1051/matecconf/201816203005
• Abdelhaleem, F.S. (2017). Hydraulics of submerged radial gates with a sill. ISH Journal of Hydraulic Engineering, 23(2), 177-186. https://doi.org/10.1080/09715010.2016.127 3798
• Abdulhadi, B.A., Kot, P., Hashim, K.S., Shaw, A. & Al Khaddar, R. (2019). Influence of current density and electrodes spacing on reactive red 120 dye removal from dyed water using electrocoagulation/electroflotation (EC/EF) process. IOP Conference Series: Materials Science and Engineering, 584(1), 012035. https://doi.org/10.1088/1757-899x/584/1/012035
• Al-Husseini,T.R. (2016). A novel experimental work and study on flow and energy dissipation over stepped spillways. Journal of University of Babylon, 24(4), 1050-1063.
• Al-Baidhani, J.H., Al-Mansori, N.J. & Al-Khafaji, D.H. (2018). Using of granular filters with different materials of media for water treatment. Journal of Engineering and Applied Sciences, 13, 10976-10982.
• Ali, H.M. & Elhamaimi, A. (2020). An experimental and numerical investigation for characteristics of submerged hydraulic jump over corrugated beds. Port-Said Engineering Research Journal, 24(1), 1-11. https://doi.org/10.21608/pserj.2020.18744.1015
• Al-Mansori, N.J. (2014). Experimental study of height and surface rroughness effects of crump weirs on over flow characteristics. Journal of University of Babylon, 22(4), 845-859. https://www.iasj.net/iasj?func=fullt_ext&aId=95777
• Aydin M.C. & Ulu, A.E. (2018). Effects of different shaped baffle blocks on the energy dissipation and the downstream scour of a regulator. Journal of Science and Technology, 8(2), 69-74. https://doi.org/10.17678/beuscitech.469053
• Elsaeed, G.H, Ali, A.M., Abdelmageed, N.B. & Ibrahim, A.M. (2016). Effect of end step shape in the performance of stilling basins downstream radial gates. Journal of Scientific Research & Reports, 9(1), 1-9. https://doi.org/10.9734/jsrr/2016/21452
• Eshkou, Z., Dehghani, A.A. & Ahmadi, A. (2018). Forced hydraulic jump in a diverging stilling basin using angled baffle blocks. Journal of Irrigation and Drainage Engineering, 144(8), 2088-2095. https://doi.org/10.29007/zx1w
• Habibzadeh, A., Loewen, M.R. & Rajaratnam, N. (2016). Turbulence measurements in submerged hydraulic jumps with baffle blocks. Canadian Journal of Civil Engineering, 43(6), 553-561. https://doi.org/10.1139/cjce2015-0480
• Hashim, K.S., Ali, S.S.M., AlRifaie, J.K., Kot, P., Shaw, A., Al Khaddar, R., Idowu, I. & Gkantou, M. (2020). Escherichia coli inactivation using a hybrid ultrasonic–electrocoagulation reactor. Chemosphere, 247, 125868. https://doi.org/10.1016/j.chemosphere.2020.125868
• Hashim, K.S., Hussein, A.H., Zubaidi, S.L., Kot, P., Kraidi, L., Alkhaddar, R., Shaw, A. & Alwash, R. (2019). Effect of initial pH value on the removal of reactive black dye from water by electrocoagulation (EC) method. Journal of Physics: Conference Series, 1294(7), 072017. https://doi.org/10.1088/1742-6596/1294/7/072017
• Hashim, K.S., Kot, P., Zubaidi, S.L., Alwash, R., Al Khaddar, R., Shaw, A., Al-Jumeily, D. & Aljefery, M.H. (2020). Energy efficient electrocoagulation using baffle-plates electrodes for efficient Escherichia coli removal from wastewater. Journal of Water Process Engineering, 33, 101079. https://doi.org/10.1016/j.jwpe.2019.101079
• Hilo, A.N. & Lafta, B.S. (2019). Numerical study for improving energy dissipation over stepped spillway by using different configurations on steps. In 12th International Conference on Developments in eSystems Engineering (DeSE), Kazan, Russia, 7-10 October 2009 (pp. 421-428). Kazan: IEEE. https://doi.org/10.1109/dese.2019.00084
• Ibrahim, M.M (2017). Improve the efficiency of stilling basin using different types of blocks American Journal of Engineering Research, 6(8), 295-304. http://www.ajer.org/papers/v6(08)/ZJ0608295304.pdf
• Maatooq, J. & Taleb, E. (2018). The performance of hydraulic jump over rough bed stilling basin consisting of cubic-shape elements. MATEC Web of Conferences, 162, 03001. https://doi.org/10.1051/matecconf/201816203001
• Mohamed, Y.A., Saleh, Y.K. & Ali, A.M. (2015). Studying the effect of different configurations and positions of sill over stilling basin on flow characteristics behind radial gate (case study Nagaa Hammadi regulator). Journal of Engineering Sciences, 43(3), 311-329.
• Mohammadzade-Habili, J. & Honar, T. (2018). Theoretical solution for analysis and design of hydraulic jump on corrugated bed. Water SA, 44(4), 647-452. https://doi.org/10.4314/wsa.v44i4.13
• Mohammadzade-Habili, J., Heidarpour, M. & Samiee, S. (2018). Study of energy dissipation and downstrem flow regime of labyrinth weirs. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 42(2), 111-119. https://doi.org/10.1007/s40996-017-0088-6
• Ryecroft, S., Shaw, A., Fergus, P., Kot, P., Hashim, K., Moody, A. & Conway, L. (2019). A first implementation of underwater communications in raw water using the 433 MHz frequency combined with a bowtie antenna. Sensors, 19(8), 1813. https://doi.org/10.3390/s19081813
• Teng, K.H., Kot, P., Muradov, M., Shaw, A., Hashim, K., Gkantou, M. & Al-Shamma’a, A. (2019). Embedded smart antenna for non- -destructive testing and evaluation (NDT&E) of moisture content and deterioration in concrete. Sensors, 19(3), 547. https://doi.org/10.3390/s19030547
• Valero Huerta, D., Garcia-Bartual, R. & Marco, J. (2015). Optimisation of stilling basin chute blocks using a calibrated multiphase RANS model. 5th International Junior Researcher and Engineer Workshop on Hydraulic Structures, Spa, Belgium, 28-30 August 2014. Retrieved from: https://www.flow3d.com/wp-content/uploads/2014/04/Optimisation-of-Stilling-Basin-Chute-Blocks-Usinga-Calibrated-Multiphase-RANS-Model.pdf