Copper matrix composite coatings produced by cold spraying process for electrical applications

• Autorzy: Tazegul O. , Dylmishi V. , Cimenoglu H.

Identyfikatory

DOI

10.1016/j.acme.2016.01.005

• Języki publikacji: EN

Abstrakty

EN

Composite coatings were deposited on commercially pure copper substrates by cold spraying of feedstock consisted of copper and Al2Cu powders. The amount of the Al2Cu powder incorporated in the feedstock varied in between 0 and 15 vol.%. Characterisations of the coatings were done by microstructural examinations, hardness and electrical conductivity measurements and wear tests. Composite coatings deposited from the feedstock containing 5 and 10 vol.% Al2Cu powder exhibited better electrical conductivity and superior wear resistance than the monolithic (Al2Cu free) copper coating. Presence of 15 vol.% Al2Cu in the feedstock diminished both the wear resistance and the electrical conductivity of the coating.

Słowa kluczowe

EN

cold spray; copper; composite; conductivity; wear

PL

miedź; przewodność; powłoki kompozytowe

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2016
• Tom: Vol. 16, no. 3
• Strony: 344--350
• Opis fizyczny: Bibliogr. 30 poz., rys., tab., wykr.

Twórcy

autor

Tazegul O.

• Department of Metallurgical and Materials Engineering, Istanbul Technical University, 34469 Istanbul, Turkey

autor

Dylmishi V.

• Department of Metallurgical and Materials Engineering, Istanbul Technical University, 34469 Istanbul, Turkey

autor

Cimenoglu H.

• Department of Metallurgical and Materials Engineering, Istanbul Technical University, 34469 Istanbul, Turkey

Bibliografia

• [1] M.X. Guo, M.P. Wang, L.F. Cao, R.S. Lei, Work softening characterization of alumina dispersion strengthened copper alloys, Materials Characterization 58 (2007) 928–935.
• [2] M. Guo, M. Wang, K. Shen, L. Cao, R. Lei, S. Li, Effect of cold rolling on properties and microstructures of dispersion strengthened copper alloys, Transactions of Nonferrous Metals Society of China 18 (2008) 333–339.
• [3] R.F. Need, D.J. Alexander, R.D. Field, V. Livescu, P. Papin, C.A. Swenson, D.B. Mutnick, The effects of equal channel angular extrusion on the mechanical and electrical properties of alumina dispersion-strengthened copper alloys, Materials Science and Engineering A 565 (2013) 450–458.
• [4] S.H. Kim, D.N. Lee, Recrystallization of alumina dispersion strengthened copper strips, Materials Science and Engineering A 313 (2001) 24–33.
• [5] V. Rajkovic, D. Bozic, A. Devecerski, M.T. Jovanovic, Characteristic of copper matrix simultaneously reinforced with nano- and micro-sized Al2O3 particles, Materials Characterization 67 (2012) 129–137.
• [6] K.I. Triantou, D.I. Pantelis, V. Guipont, M. Jeandin, Microstructure and tribological behavior of copper and composite copper + alumina cold sprayed coatings for various alumina contents, Wear 336–337 (2015) 96–107.
• [7] E.J.T. Pialago, O.K. Kwon, C.W. Park, Cold spray deposition of mechanically alloyed ternary Cu–CNT–SiC composite powders, Ceramics International 41 (2015) 6764–6775.
• [8] H. Koivuluoto, G. Bolelli, A. Milanti, L. Lusvarghi, P. Vuoristo, Microstructural analysis of high-pressure cold-sprayed Ni, NiCu and NiCu + Al2O3 coatings, Surface & Coatings Technology 268 (2015) 224–229.
• [9] H.-T. Wang, C.J. Li, G.J. Yang, C.-X. Li, Effect of heat treatment on the microstructure and property of cold-sprayed nanostructured FeAl/Al2O3 intermetallic composite coating, Vacuum 83 (2009) 146–152.
• [10] P.S. Phani, D.S. Rao, S.V. Joshi, G. Sundararajan, Effect of process parameters and heat treatments on properties of cold sprayed copper coatings, Journal of Thermal Spray Technology 16 (3) (2007) 425–434.
• [11] P.S. Phani, V. Vishnukanthan, G. Sundararajan, Effect of heat treatment on properties of cold sprayed nanocrystalline copper alumina coatings, Acta Materialia 55 (2007) 4741–4751.
• [12] H. Koivuluoto, P. Vuoristo, Effect of powder type and composition on structure and mechanical properties of Cu + Al2O3 coatings prepared by using low-pressure cold spray process, Journal of Thermal Spray Technology 19 (5) (2010) 1081–1092.
• [13] A. Sova, D. Pervushin, I. Smurov, Development of multimaterial coatings by cold spray and gas detonation spraying, Surface & Coatings Technology 205 (2010) 1108–1114.
• [14] D. Seo, K. Ogawa, K. Sakaguchi, N. Miyamoto, Y. Tsuzuki, Parameter study influencing thermal conductivity of annealed pure copper coatings deposited by selective cold spray processes, Surface & Coatings Technology 206 (2012) 2316–2324.
• [15] P.D. Eason, J.A. Fewkes, S.C. Kennett, T.J. Eden, K. Tello, M.J. Kaufman, M. Tiryakioglu, On the characterization of bulk copper produced by cold gas dynamic spray processing in as fabricated and annealed conditions, Materials Science and Engineering A 528 (2011) 8174–8178.
• [16] O. Tazegul, O. Meydanoglu, E.S. Kayali, Surface modification of electrical contacts by cold gas dynamic spraying process, Surface & Coatings Technology 236 (2013) 159–165.
• [17] J. Liu, X. Zhou, X. Zheng, H. Cui, J. Zhang, Tribological behavior of cold-sprayed nanocrystalline and conventional copper coatings, Applied Surface Science 258 (2012) 7490–7496.
• [18] L. Dyachkova, E.E. Feldshtein, On the properties of composites based on sintered bronze with alumina additives, Composites: Part B 45 (2013) 239–247.
• [19] Y.A. Wang, J.X. Li, Y. Yan, L.J. Qiao, Effect of surface film on sliding friction and wear of copper-impregnated metallized carbon against a Cu–Cr–Zr alloy, Applied Surface Science 258 (2012) 2362–2367.
• [20] X.-T. Luo, C.-X. Li, F.-L. Shang, G.-J. Yang, Y.-Y. Wang, C.-J. Li, High velocity impact induced microstructure evolution during deposition of cold spray coatings: a review, Surface & Coatings Technology 254 (2014) 11–20.
• [21] H. Lee, H. Shin, S. Lee, K. Ko, Effect of gas pressure on Al coatings by cold gas dynamic spray, Materials Letters 62 (2008) 1579–1581.
• [22] X.K. Suo, Q.L. Suo, W.Y. Li, M.P. Planche, H.L. Liao, Effects of SiC volume fraction and particle size on the deposition behavior and mechanical properties of cold-sprayed AZ91D/ SiCp composite coatings, Journal of Thermal Spray Technology 23 (1–2) (2014) 91–97.
• [23] Y.K. Han, N. Birbilis, K. Spencer, M.-X. Zhang, B.C. Muddle, Investigation of Cu coatings deposited by kinetic metallization, Materials Characterization 61 (2010) 1167–1186.
• [24] W. Li, C. Huang, M. Yu, H. Liao, Investigation on mechanical property of annealed copper particles and cold sprayed copper coating by a micro-indentation testing, Materials & Design 46 (2013) 219–226.
• [25] A. Sova, V.F. Kosarev, A. Papyrin, I. Smurov, Effect of ceramic particle velocity on cold spray deposition of metal-ceramic coatings, Journal of Thermal Spray Technology 20 (1–2) (2011) 285–291.
• [26] Y. Xiong, M.X. Zhang, The effect of cold sprayed coatings on the mechanical properties of AZ91D magnesium alloys, Surface & Coatings Technology 253 (2014) 89–95.
• [27] K.J. Hodder, J.A. Nychka, A.G. McDonald, Comparison of 10 mm and 20 nm Al-Al2O3 metal matrix composite coatings fabricated by low-pressure cold gas dynamic spraying, Journal of Thermal Spray Technology 23 (5) (2014) 839–848.
• [28] Y. Wang, B. Normand, N. Mary, M. Yub, H. Liao, Microstructure and corrosion behavior of cold sprayed SiCp/ Al 5056 composite coatings, Surface & Coatings Technology 251 (2014) 264–275.
• [29] M. Yu, W.Y. Li, X.K. Suo, H.L. Liao, Effects of gas temperature and ceramic particle content on microstructure and microhardness of cold sprayed SiCp/Al 5056 composite coatings, Surface & Coatings Technology 220 (2013) 102–106.
• [30] W.B. Lee, K.S. Bang, S.B. Jung, Effects of intermetallic compound on the electrical and mechanical properties of friction welded Cu/Al bimetallic joints during annealing, Journal of Alloys and Compounds 390 (2005) 212–219.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę