PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Dynamical system analysis of unstable flow phenomena in centrifugal blower

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Konferencja
International Symposium on Compressor & Turbine Flow Systems Theory & Application Areas "SYMKOM" (11 ; 20-23.10.2014 ; Łódź, Polska)
Języki publikacji
EN
Abstrakty
EN
Methods of dynamical system analysis were employed to analyze unsteady phenomena in the centrifugal blower. Pressure signals gathered at different control points were decomposed into their Principal Components (PCs) by means of Singular Spectrum Analysis (SSA). Certain number of PCs was considered in the analysis based on their statistical correlation. Projection of the original signal onto its PCs allowed to draw the phase trajectory that clearly separated non-stable blower working conditions from its regular operation.
Twórcy
autor
  • Mechanical and Aerospace Engineering, University of Strathclyde 75 Montrose Street Glasgow G1 1XJ
autor
  • Mechanical and Aerospace Engineering, University of Strathclyde 75 Montrose Street Glasgow G1 1XJ
  • nstitute of Turbomachinery, Lodz University of Technology 90-924 Łódź, Wólczańska 219/223
Bibliografia
  • [1] Emmons H.W., Pearson C.E., Grant H.P.: Compressor surge and stall propagation. Transactions of ASME, 77(4):455-467, 1955.
  • [2] Greitzer E.M.: Surge and rotating stall in axial flow compressors – part I: Theoretical compression system model. Journal of Engineering for Power, 98(2):190-198, 1976.
  • [3] Greitzer E.M.: Surge and rotating stall in axial flow compressors – part II: Experimental results and comparison with theory. Journal of Engineering for Power, 98(2):199-211, 1976.
  • [4] Hansen K.E., Jorgensen P., Larsen P.S.: Experimental and theoretical study of surge in a small centrifugal compressor. Journal of Fluids Engineering, 103(3):391-395, 1981.
  • [5] Moore F.K., Greitzer E.M.: A theory of post-stall transients in axial compression systems: Part i-development of equations. Journal of Engineering for Gas Turbines and Power, 108(1):68-76, 1986.
  • [6] Moore F.K., Greitzer E.M.: A theory of post-stall transients in axial compression systems: Part ii-application. Journal of Engineering for Gas Turbines and Power, 108(2):231-239, 1986.
  • [7] Gravdahl J.T. and Egeland O.: Speed and surge control for a low order centrifugal compressor model. In Proceedings of the 36th International Conference on Control Applications, San Diego, 1997. IEEE.
  • [8] Ishii H. and Kashiwabara Y.: Study on surge and rotating stall in axial compressors: A numerical model and parametric study for multiblade-row compressors. JSME International Journal. Series B: Fluids and Thermal Engineering, 39(3):621-631, 1996.
  • [9] Jansen W.: Rotating stall in a radial vaneless diffuser. Journal of Basic Engineering, 86(4):750-758, 1964.
  • [10] Senoo Y., Ishida M., Kinoshita Y.: Asymmetric flow in vaneless diffusers of centrifugal blowers. Journal of Fluids Engineering, 99(1):104-111, 1977.
  • [11] Abdelhamid A.N., Bertrand J.: Distinctions between two types of self excited gas oscillations in vaneless radial diffusers. In Proceedings of Turbo Expo, San Diego, 1979. ASME.
  • [12] Frigne P.: Van den Braembussche R., Distinction between different types of impeller and diffuser rotating stall in a centrifugal compressor with vaneless diffuser. Journal of Engineering for Gas Turbines and Power, 106(2):468-474, 1984.
  • [13] Lennemann E., Howard J.: Unsteady flow phenomena in rotating centrifugal impeller passages. Journal of Engineering for Gas Turbines and Power 92.1 (1970): 65-71.
  • [14] Liśkiewicz G., Horodko L., Stickland M. et al.: Identification of phenomena preceding blower surge by means of pressure spectral maps. Experimental Thermal and Fluid Science, 54:267-278, 2014.
  • [15] Mizuki S., Kawashima Y., Ariga I.: Investigation concerning rotating
  • [16] Packard N.H., Crutcheld J.P., Farmer J.D., et al.: Geometry from a time series. Physical Review Letters, 45(9):712, 1980.
  • [17] Takens F.: Detecting Strange Attractors in Turbulence, Lecture Notes
  • [18] Palomba C., Breugelmans F.: Phase portraits from rotating stall time series, XII ISABE conference, 312-318, Melbourne 1995.
  • [19] Palomba C., Horst L., Breugelmans F.: Strange Attractor Characterization of Rotating Stall in an Axial Flow Compressor. JSME Centennial, 1997.
  • [20] Hagino N., Uda K., Kashiwabara Y.: Prediction and Active Control of Surge Inception of a Centrifugal Compressor. Proceedings of the International Gas Turbine Congress. 2003.
  • [21] Broomhead D.S., King G.: Extracting qualitative dynamics from experimental data. Physica D: Nonlinear Phenomena, 20(2):217-236, 1986.
  • [22] Komatsubara Y., Mizuki S.: Dynamical system analysis of unsteady phenomena in centrifugal compressor. Journal of Thermal Science 6.1 (1997): 14-20.
  • [23] Gu C., Yamaguchi K., Nagashima T., et al.: Observation of centrifugal compressor stall and surge in phase portraits of pressure time traces at impeller and diffuser wall. Journal of fluids engineering 129.6 (2007): 773-779.
  • [24] Kuzmin V., Khazhuev V.: Measurement of liquid or gas flow (flow velocity) using convergent channels with a witoszynski prole. Measurement Techniques, 36(3):288-296, 1993.
  • [25] Golyandina N., Nekrutkin V., Zhigljavsky A.: Analysis of time series structure: SSA and related techniques. CRC Press, 2001.
  • [26] Jolliffe I.: Principal component analysis. Volume 487. Springer-Verlag New York, 1986.
  • [27] Garcia D., Trendafilova I.: A multivariate data analysis approach towards vibration analysis and vibration-based damage assessment. Application for delamination detection in a composite beam.Journal of Sound and Vibration, 2014.
  • [28] Ghil M., Allen M., Dettinger M., et al.: Advanced spectral methods for climatic time series, Reviews of Geophysics, 2002.
  • [29] Kabalyk K., Liśkiewicz G., Horodko L., et al.: Use of pressure spectral maps for analysis of influence of the plenum volume on the surge in centrifugal blower. In Proceedings of Turbo Expo, Düsseldorf, 2014. ASME.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-2a4702de-99c8-4603-a583-c429b704b0bc
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.