Application of Minimal Quantity Lubrication in Gear Hobbing

• Autorzy: Stachurski W.
• Języki publikacji: EN

Abstrakty

EN

The results of investigations on application of Minimal Quantity Lubrication (MQL) in gear hobbing are presented in the paper. The experimental stand which allows measurements of cutting forces, Fc, is described. Experiments were carried out for MQL and flood cooling. The influence of the fluid supply methods on tool wear and cutting forces is presented in the paper. The influence of the different workpiece materials is presented, too. The investigations have proved that the using of the MQL method is by all means justified. The results indicate that the hob wear rate is similar for the MQL and for conventional flood cooling. This is also confirmed by the measurements of cutting forces, which values are comparable for both methods.

Słowa kluczowe

EN

gear hobbing; cutting forces; tool wear; cutting fluid; MQL

PL

siła skrawania; zużycie narzędzi; chłodziwo; MQL

• Wydawca: Wydawnictwo Politechniki Łódzkiej
• Czasopismo: Mechanics and Mechanical Engineering
• Rocznik: 2012
• Tom: Vol. 16, nr 2
• Strony: 133--140
• Opis fizyczny: Bibliogr. 12 poz.

Twórcy

autor

Stachurski W.

• Institute of Machine Tools and Production Engineering Technical University of Lodz

Bibliografia

• [1] Oczoś, K.E.: Postęp w obróbce skrawaniem. Cz. II. Obróbka na sucho i ze zminimalizowanym smarowaniem, Mechanik, 5–6, 307–317, 1998.
• [2] Oczoś, K.E.: Doskonalenie strategii chłodzenia i smarowania w procesach obróbkowych, Mechanik, 10, (2004), 596–606, 2004.
• [3] Klocke, F. and Eisenblatter, G.: Dry cutting, Annals of the CIRP, 46/2, 519–526, 1997.
• [4] Weinert, K., Inasaki, I., Sutherland, J.W. and Wakabayashi, T.: Dry machining and minimum quantity lubrication, Annals of the CIRP, 53/2, 511–537, 2004.
• [5] Rahman, M., Senthil, Kumar A. and Salam, M.U.: Experimental evaluation on the effect of minimal quantities of lubricant in milling, International Journal of Machine Tools & Manufactured,42, 539–547, 2002.
• [6] Wakabayashi, T., Sato, H. and Inasaki, I.: Turning using extremely small amounts of cutting fluids, JSME International Journal, C/41/1, 143–148, 1998.
• [7] Dhar, N.R., Kamruzzaman, M. and Ahmed, M.T.: Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI–4340 steel, Journal of Materials Processing Technology, 172, 299-304, 2006.
• [8] Suda, S., Wakabayashi, T., Inasaki, I. and Yokota H.: Multifunctional application of a synthetic ester to machine tool lubrication based on MQL machining lubricants, Annals of the CIRP, 53/1, 61–64, 2004.
• [9] Weinert, K., Inasaki, I., Sutherland, J.W. and Wakabayashi, T.: Dry machining and minimum quantity lubrication, Annals of the CIRP, 53/2, 511–537, 2004.
• [10] Matsuoka, H., Tsuda, Y., Suda, S. and Yokota H.: Fundamental research on hobbing with minimal quantity lubrication of cutting oil (effect of cutting speed), JSME International Journal, C/49/4, 1140–1150, 2006.
• [11] Stachurski, W.: Wpływ warunków podawania cieczy obróbkowej w stref，e obróbki z minimalnym wydatkiem na zużycie frezu ślimakowego, PhD Thesis, Łódź, 2008.
• [12] Stachurski, W., Midera, S. and Zgórniak, P.: Siła skrawania Fc podczas frezowania obwiedniowego kół zębatych z zastosowaniem wybranych metod chłodzenia i smarowania, Archiwum Technologii Maszyn i Automatyzacji, 30/4, 37–46, 2010.