Structure and properties of amorphous and nanocrystalline Fe78Si11-xB11Yx(x = 0 or 2) alloys produced in a single production step using controlled parameters melt-spinning method

• Autorzy: Błoch K.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The paper presents results of structural and magnetic properties of Fe78Si11B11 and Fe78Si9B11Y2 alloys in the form of ribbons. The effect of addition of yttrium on the structure and magnetic properties was investigated. Design/methodology/approach: The investigated samples were prepared in the form of ribbons using the melt-spinning method. The material structures were investigated using X-ray diffractometry, Mössbauer spectroscopy and scanning electron microscopy. The magnetic properties were studied using using vibrating magnetometer. Findings: Samples were fabricated using rapid cooling at a rotating copper wheel. Images of fractures of investigated samples obtained by decohesion using same magnifications are similar. The distinct vein like structure or the husk structure are not visible thought they are typical of amorphous and nanocrystalline materials with a high degree of internal stress. Mössbauer spectrum is typical as for amorphous materials that are ferromagnetic. It consists of six lines forming a Zemman's sextet. The hyperfine induction field distribution obtained for this sample shows clearly separated two components: low- and high-field. After the introduction of 2% at. Y to the alloy Fe78Si11B11 in place of Si partial crystallization occurred. The shape of the initial magnetization curves is similar and corresponds to materials with low effective anisotropy. Originality/value: The paper presents some researches of the Fe-based bulk amorphous alloys obtained by the melt-spinning method.

Słowa kluczowe

EN

amorphous alloy; nanocrystalline alloy; structure; microstructure; hysteresis loops

PL

stop amorficzny; stop nanokrystaliczny; struktura; mikrostruktura; pętle histerezy

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2015
• Tom: Vol. 73, nr 1
• Strony: 5--12
• Opis fizyczny: Bibliogr. 44 poz., rys., tab.

Twórcy

autor

Błoch K.

• Institute of Physics, Faculty of Materials Processing Technology and Applied Physics Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Częstochowa, Poland

Bibliografia

• [1] A. Inoue, B. Shen, New Fe-based bulk glassy alloys with high saturated magnetic flux density of 1.4-1.5 T, Material Science and Engineering A 375-377 (2004) 302-306.
• [2] C.H. Smith, Application of rapidly solidified soft magnetic alloys, in: H.H. Liebermann (ed.), Rapidly Solidified Alloys, Marcel Dekker, New York, 1993, 139-155.
• [3] A. Inoue, J.S. Gook, Fe-based ferromagnetic glassy alloys with wide supercooled liquid region, Materials Transactions JIM 36 (1995) 1180-1183.
• [4] V. Ponnambalam, S.J. Poon, G.J. Shiflet, V.M. Keppens, R. Taylor, G. Petculescu, Synthesis of iron-based bulk metallic glasses as nonfer-romagnetic amorphous steel alloys, Applied Physics Letters 83 (2003) 1131-1133.
• [5] A. Inoue, T. Zhang, H. Koshiba, A. Makino, New bulk amorphous Fe-(Co, Ni)-MB (M=Zr,Hf,Nb,Ta,Mo,W) alloys with good soft magnetic properties, Journal of Applied Physic 83 (1998) 6326-6328.
• [6] M. Marinescu, H. Chiriac, M. Grigoras, Magnetic properties of bulk nanocomposite permanent magnets based on NdDyFeB alloys with additions, Journal of Magnetism and Magnetic Materials 290-291 (2005) 1267-1269.
• [7] W. Zhang, A. Inoue, Bulk nanocomposite permanent magnets produced by crystallization of (Fe,Co)-(Nd,Dy)-B bulk glassy alloy, Applied Physics Letters 80 (2002) 1610.
• [8] A. Inou, T. Zhang, N. Nishiyama, K. Ohba, T. Masumoto, Preparation of 16 mm diameter rod of amorphous Zr65Al7.5Ni10Cu17.5 alloy, Materials Transactions JIM 34 (1993) 1234-1237.
• [9] A. Inoue, T. Zhang, N. Nishiyama, Amorphous Zr-Al-TM (TM = Co, Ni, Cu) alloys with significant supercooled liquid region of over 100 K, Materials Transactions JIM 32 (1991) 1005-1010.
• [10] A. Parker, W.L. Johnson, A highly processable metallic glass: Zr41.2Ti13.8Cu12.5Ni10Be22.5, Applied Physics Letters 63 (1993) 2342-2344.
• [11] A. Inoue, A. Takeuchi, T. Zhang, Ferromagnetic Bulk Amorphous Alloys, Metallurgical and Materials Transactions A 29 (1998) 1779-1793.
• [12] A. Inoue, Bulk amorphous alloys, Trans Tech Publications, Zurich, 1998-1999.
• [13] H. Izumi, H. Sunada, Y. Hayashi, T. Masumoto, Fatigue Properties of Amorphous Ni75Si8B17 and Co75Si10B15 Alloys, Journal of the Japan Institute of Metals 48 (1984) 371-377.
• [14] Y. Yokoyama, N. Nishiyama, K. Fukaura, H. Sunada, A. Inoue, Rotating-beam fatigue straight of Pd40Cu30Ni10P20 bulk amorphous alloy, Materials Transactions JIM 40 (1999) 696-699.
• [15] H.K. Lachowicz, Magnetyki amorficzne, metody wytwarzania, właściwości zastosowania techniczne, Instytut Fizyki Polskiej Akademii Nauk, Warszawa, 1983.
• [16] H.S. Chen, C.E. Miller, A rapid quenching technique for the preparation of thin uniform films of amorphous solids, Review of Scientific Instruments, 1970, 411237.
• [17] K. Koumoto, T. Mori, Thermoelectric nanomaterials, Materials Design and Applications, Springer Series in Materials Science 182 (2013).
• [18] M. Dośpiał, M. Nabiałek, M. Szota, J. Gondro, The magnetization reversal processes of bulk (Nd, Y)-(Fe, Co)-B alloy in the as-quenched state, Archives of Metallurgy and Materials 60/3 (2015) 1587-1590.
• [19] Y. Wang, X. Song, Z. Sun, X. Zhou, J. Guo, The solidification of CuCe alloys under various cooling rates, Materials-Science Poland 25 /1 (2007) 199-207 .
• [20] K.S. Kim, S.G. Min, S.C. Yu, S.K. Oh, Y.C. Kim, K.Y. Kim, The large magnetocaloric effect in amorphous Fe91-xYxZr9 (x = 0, 5, 10) alloys, Journal of Magnetism and Magnetic Materials 304 (2006) e642-e644.
• [21] T. Liu, Z. X. Xu, R. Z. Ma, Structural defects and internal stress field distribution in nanocrystalline Fe73.5Cu1Nb3Si13.5B9, Journal of Magnetism and Magnetic Materials 152 (1996) 365-369.
• [22] L. Jeziorski, M.G. Nabiałek, M. Szota, M. Dośpiał, Method of continuous casting of amorphous metallic materials based on iron, Archives of Foundry Engineering 11/4 (2011) 69-72.
• [23] R.D. Fisher, D.E. Koopman, Structure softelectroless cobalt films, Journal of The Electrochemical Society 11 (1964) 263-264.
• [24] A.I. Gubanov, Kvazi klassices kajateorija amorfnych ferromagnetikov, Fizika Tverdego Tela 2 (1960) p. 502 (in Russian).
• [25] T. Mizushima, K. Jkarashi, A. Makino, A. Inoue, Structure and magnetic properties of bulk Fe-Al-Ga-P-C-B-Si glassy alloys in a ringed form prepared by copper mold casting, IEEE Transactions on Magnetics 35 (1999) 3361-3363.
• [26] T. Itoi, A. Inoue, High-frequency permeability of (Fe, Co, Ni)62Nb8B30 amorphous alloys with a wide super-cooled liquid region, Applied Physics Letters 74 (1999) 2510-2512.
• [27] Y. Yoshizawa, K. Yamauchi, S. Oguma, European Patent Application 0271657 (22.06.1988).
• [28] Y. Yoshizawa, S. Oguma, K. Yamauchi, New Fe-based soft magnetic alloys composed of ultrafine grain structure, Journal of Applied Physic 64 (1998) 6044-6046.
• [29] C. Han, A. Takeuchi, A. Inoue, Materials Transactions JIM 40 (1999) 42.
• [30] T. Kulik, Nanokrystaliczne materiały magnetycznie miękkie otrzymane przez krystalizację szkieł metalicznych, Oficyna Wydawnicza Politechniki Warszawskiej, 1998.
• [31] A. Inoue, Bulk amorphous and nanocrystalline alloys with high functional properties, Materials Science and Engineering A 304-306 (2001) 1-10.
• [32] T. Kulik, The Influence of Copper, Niobium and Tantalum Additions on the Crystallization of Fe-Si-B-Based Glasses, Materials Science and Engineering A 159 (1992) 95-101.
• [33] L.K. Varga, E. Bakos, E. Kisdi-Koszo, E. Zsoldos, L.F. Kiss, Time and Temperature-Dependence of Nanocrystalline Structure Formation in a Finemet-Type Amorphous Alloy, Journal of Magnetism and Magnetic Materials 133 (1994) 280-282.
• [34] T. Graf, G. Hampel, J. Korus, J. Hesse, G. Herzer, Influence of Nb concentration on structure and crystallization onset of amorphous Fe(Cu,Nb)SiB finemet alloys, Nanostructural Materials 6/1-4 (1995) 469-472.
• [35] M. Nabiałek, J. Zbroszczyk, W. Ciurzyńska, J. Olszewski, S. Lesz, P. Brągiel, J. Gondro, K. Sobczyk, A. Łukiewska, J. Świerczek, P. Pietrusiewicz, Micro-structure, somemagnetic and mechanical properties of amorphous Fe61Co10Zr2.5Hf2.5W2Y2B20 plates, Archives of Metallurgy and Materials 55(2010) 195-203.
• [36] R. Li, S. Kumar, S. Ram, M. Stoica, S. Roth, J. Eckert, Crystalization and magnetic properties of [(Fe, Co)0,75Si0.05B0.20]94 metallic glasses, Journal of Applied Physic 42 (2009) 085006.
• [37] W.M. Wang, A. Gebert, S. Roth, U. Kuehn, L. Schultz, Effect of Si on glass forming ability, thermal stability and magnetic properties of amorphous Fe60Co8ZrxMo5W2BySi25-x-y alloys, Journal of Alloys and Compounds 459 (2008) 203-208.
• [38] A. Makino, T. Kubota, C. Chang, M. Makabe, A. Inoue, FeSiBP bulk metallic glasses with high magnetization and excellent magnetic softness, Journal of Magnetism and Magnetic Materials 320 (2008) 2499-2503.
• [39] X.D. Wang, J.Z. Jiang, S. Yi, Reversible structural relaxation and crystallization of Zr62Al8Ni13Cu17 bulk metallic glass, Journal of Non-Crystalline Solids 353 (2007) 4157-4161.
• [40] S.F. Guo, Z.Y. Wu, L. Liu, Preparation and magnetic properties of FeCoHfMoBY bulk metallic glasses, Journal of Alloys and Compounds 468 (2009) 54-57.
• [41] T. Kulik, H. Matyja, Effect of flash- and furnace annealing on the magnetic and mechanical properties of metallic glasses, Materials Science and Engineering A 133 (1991) 323-235.
• [42] M. Nabiałek, Wytwarzanie oraz właściwości stopów amorficznych I nanokrystalicznych na bazie żelaza, Wydawnictwo Wydziału Inżynierii Procesowej, Materiałowej i Fizyki Stosowanej, Politechniki Częstochowskiej, Seria monografie nr 22, 2012.
• [43] S. Takayama, Y. Oi, The analysis of casting conditions of amorphous alloys, Journal of Applied Physics 50 (1979) 4962-4965.
• [44] H. Lachowicz, Amorphous Magnetic Materials, Publikacje Instytutu Fizyki Polskiej Akademii Nauk, Warszawa (1983) 30 (in Polish).