Latex forWater-Borne Direct-to-Metal (DTM) Coatings

• Autorzy: Secher M. , Baude C. , Fream A. , Smuck J. M.
• Języki publikacji: EN

Abstrakty

EN

Despite recent innovations, metal substrates are still difficult to protect with water-borne products because of their inherent weakness (residual surfactants from polymerization enabling water migration through the film, rust formation during application, lack of adhesion to non ferrous metals, etc.). Nevertheless, because of environmental and legislative pressure, there is an increasing demand for high quality Direct-To-Metal products able to substitute solvent borne technologies such as alkyds. ACT’12 Congress will be the opportunity for OMNOVA Solutions to introduce its new binder, designed for DTM enamel, with the following key advantages: Excellent adhesion to ferrous & non-ferrous metals, high initial gloss and gloss retention, outstanding water resistance and salt spray resistance without anticorrosive pigment.

• Wydawca: Sieć Badawcza Łukasiewicz – Instytut Inżynierii Materiałów Polimerowych i Barwników
• Czasopismo: Farby i Lakiery
• Rocznik: 2012
• Tom: nr 6
• Strony: 9--19
• Opis fizyczny: Bibliogr. 9 poz., rys., tab.

Twórcy

autor

Secher M.

• OMNOVA Solutions, European Technical Center, Villejust – FRANCE

autor

Baude C.

autor

Fream A.

autor

Smuck J. M.

Bibliografia

• 1. M.A. Wennig & J. Fenn, „Latex blends: an approach to zero VOC coatings” Goodyear Chemical, J.C.T., 68, No. 852, 39 (1995).
• 2. S.T. Eckersley & B.J. Helmer, „Mechanistic considerations of particle size effects on film properties of hard / soft latex blends”, J.C.T., 69, No. 864, 97 (1997).
• 3. A. Fream and S. Magnet, Low VOC, high performance coating formulation using surfactant free latex blends, Paper presented at the 77th Annual Meeting Technical Program of the FSCT, Dallas, Tx., October 20-22, 1999.
• 4. B. Schuler, et al, „Structure and properties of multiphase particles and their impact on the performance of architectural coatings”, Progress in Organic Coatings 40, 139-150, (2000)
• 5. C.I. Tyre, „Novel multi-phase acrylics for High performance coatings”, ACS Conference, Indianapolis, 2012
• 6. G. Apitz, R. Autrata, M. Dimmers, „Shiny Acrylics: Resin modification of dispersion to improve block resistance and gloss”, European Coatings Journal 11-06, (2006)
• 7. G. Apitz, M. Dimmers, „Novel, multi-phase acrylic emulsions for environmental friendly corrosion protection”, Farbe und Lack, (6-2010) 16, (2010)
• 8. J. Hartig, K. Ragunathan, A. Smith, A. Tuchbreiter, „New Strategies for Improving Film Properties of Zero VOC Coatings”, ACS Conference, Indianapolis, 2012
• 9. A. Overbeek, „Polymer heterogeneity in waterborne coatings”, J. Coat. Technol. Res. 23 September, 2009