Analysis of a crash on a vehicle system by adjusting appropriate input parameters to manage energy absorption capacity for enhancing passenger safety

• Autorzy: Dhamone Sagar Parashuram , Padmakumar Arunkumar

Identyfikatory

DOI

10.32933/ActaInnovations.50.1

• Języki publikacji: EN

Abstrakty

EN

The aim of the research is to develop a front bumper system that absorbs maximum impact energy as compared to the current bumper available in the market, Bumper design is based on increasing the area of the crumping zone to slow down the collision and observe the impacts taking place at the time of jerks and reduces the percentage of damage. To develop the system, the number of load cases tested numerically in passive safety simulation has increased significantly in recent years. The variety of applications may be divided into three main topics: structural crashworthiness of the whole car, passenger protection, and crashworthiness of components. Present theories and practices. To absorb impact, the front bumper of the car uses a spring-loaded system that is installed between the bumper and the support for the chassis structure. This system is made of metal and serves as the bumper's structural foundation. A honeycomb structure is being added to the bumper as a composite material together with a layer of galvanized iron as it is being created in this manner, which increases strength while weighing less. This arrangement design is suitable for psychoacoustics, varying velocity explicit analysis is performed with the approach of finite element analysis, experimental testing is carried out for the validation of the value and advanced manufacturing methods are implemented with statistical results, and one of the cheapest systems is developed as compared to the current bumper systems.

Słowa kluczowe

EN

bumper system; crash analysis; composite material; CAD; experimental testing; FEA

PL

układ zderzakowy; analiza awarii; materiał kompozytowy; CAD; badania eksperymentalne; MES

• Wydawca: Centrum Badań i Innowacji Pro-Akademia ; Ukrainian Academy of Sciences - Research and Development Centre for Industrial Problems of Development
• Czasopismo: Acta Innovations
• Rocznik: 2023
• Tom: no. 50
• Strony: 5--17
• Opis fizyczny: Bibliogr. 20 poz.

Twórcy

autor

Dhamone Sagar Parashuram

• Department of Mechanical Engineering, KLS’s Gogte Institute of Technology Belagavi, India, Affiliated to Visvesvaraya Technological University Belagavi, India

• https://orcid.org/0000-0002-9674-1414

autor

Padmakumar Arunkumar

• Department of Mechanical Engineering, KLS’s Gogte Institute of Technology Belagavi, India, Affiliated to Visvesvaraya Technological University Belagavi, India

• https://orcid.org/0000-0002-9485-7042

Bibliografia

• [1] N.S. Muhammad, A. Hambali, J. Rosidah, W.S. Widodo, M.N. Ahmad, A review of energy absorption of automotive bumper beam, Int. J. Appl. Eng. Res. 12 (2017) 238–245.
• [2] J. Marzbanrad, M. Alijanpour, M.S. Kiasat, Design and analysis of an automotive bumper beam in low-speed frontal crashes, Thin-Walled Struct. 47 (2009) 902–911. https://doi.org/10.1016/j.tws.2009.02.007.
• [3] L. Mei, C.A. Thole, Data analysis for parallel car-crash simulation results and model optimization, Simul. Model. Pract. Theory. 16 (2008) 329–337. https://doi.org/10.1016/j.simpat.2007.11.018.
• [4] A. Bhuyan, O. Ganilova, Crush can behaviour as an energy absorber in a frontal impact, in: J. Phys. Conf. Ser., 2012: p. 012009. https://doi.org/10.1088/1742-6596/382/1/012009.
• [5] R.E. Elewa, S.A. Afolalu, O.S.I. Fayomi, Overview Production Process and Properties of Galvanized Roofing Sheets, in: J. Phys. Conf. Ser., 2019: p. 022069. https://doi.org/10.1088/1742-6596/1378/2/022069.
• [6] N. Abedrabbo, R. Mayer, A. Thompson, C. Salisbury, M. Worswick, I. van Riemsdijk, Crash response of advanced high-strength steel tubes: Experiment and model, Int. J. Impact Eng. 36 (2009) 1044–1057. https://doi.org/10.1016/j.ijimpeng.2009.02.006.
• [7] X. Yang, Y. Xia, Q. Zhou, P.C. Wang, K. Wang, Modeling of high strength steel joints bonded with toughened adhesive for vehicle crash simulations, Int. J. Adhes. Adhes. 39 (2012) 21–32. https://doi.org/10.1016/j.ijadhadh.2012.06.007.
• [8] R. Gümrük, S. Karadeniz, The influences of the residual forming data on the quasi-static axial crash response of a top-hat section, Int. J. Mech. Sci. 51 (2009) 350–362. https://doi.org/10.1016/j.ijmecsci.2009.03.010.
• [9] C.L.F. Rocha, D.A.K. Fabricio, V.M. Costa, A. Reguly, Quality assurance of absorbed energy in Charpy impact test, in: J. Phys. Conf. Ser., 2016: p. 012009. https://doi.org/10.1088/1742-6596/733/1/012009.
• [10] E. Wilhelm, L. Rodgers, R. Bornatico, Real-time electric vehicle mass identification, World Electr. Veh. J. 6 (2013) 141–146. https://doi.org/10.3390/wevj6010141.
• [11] Y.Q. Sun, C. Cole, M. McClanachan, The calculation of wheel impact force due to the interaction between vehicle and a turnout, in: Proc. Inst. Mech. Eng. Part F J. Rail Rapid Transit, 2010: pp. 391–403. https://doi.org/10.1243/09544097JRRT350.
• [12] T.L. Teng, F.A. Chang, Y.S. Liu, C.P. Peng, Analysis of dynamic response of vehicle occupant in frontal crash using multibody dynamics method, Math. Comput. Model. 48 (2008) 1724–1736. https://doi.org/10.1016/j.mcm.2007.10.020.
• [13] M. Of, R. Transport, Automotive Vehicles - External Projections -Performance Requirements for M1 Vehicles, Automot. Res. Assoc. India. (2016) 1–18.
• [14] ECE, Uniform Provisions Concerning the Approval of Vehicles With Regard To Their Front and Rear Protective Devices (Bumpers, Etc.), 1980.
• [15] F. Xu, X. Tian, G. Li, Experimental Study on Crashworthiness of Functionally Graded Thickness Thin-Walled Tubular Structures, Exp. Mech. 55 (2015) 1339–1352. https://doi.org/10.1007/s11340-015-9994-3.
• [16] PCB Piezotronics Incorporation, Impact and Drop Testing, New York. (2007) 1–14.
• [17] D. Johnsen, L. Ostendorf, M. Bechberger, D. Strommenger, Review on Smart Charging of Electric Vehicles via Market-Based Incentives, Grid-Friendly and Grid-Compatible Measures, World Electr. Veh. J. 14 (2023) 25. https://doi.org/10.3390/wevj14010025.
• [18] H. Chang, Z. Su, S. Lu, G. Zhang, Application of Deep Learning Network in Bumper Warpage Quality Improvement, Processes. 10 (2022) 1006. https://doi.org/10.3390/pr10051006.
• [19] K. Kumar, Journal of Automobile Engineering and Applications Study of Two-distinct Automotive Bumper Beam Designs during Low speed impacts, J. Automob. Eng. Appl. 7 (2020) 16–28. www.stmjournals.com.
• [20] A.T. Beyene, E.G. Koricho, G. Belingardi, B. Martorana, Design and manufacturing issues in the development of lightweight solution for a vehicle frontal bumper, in: Procedia Eng., 2014: pp. 77–84. https://doi.org/10.1016/j.proeng.2014.11.12.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).