Influence of Abrasive Treatment of Steel Fibers on the Effectiveness of Anchoring in Concrete

• Autorzy: Janikowska Dorota

Identyfikatory

DOI

10.54740/ros.2022.007

• Języki publikacji: EN

Abstrakty

EN

The article presents an original proposal to improve the efficiency of anchoring steel fibers in fibroconcrete mixtures. The expected effect was obtained by developing the surface of the fibers by mechanical abrasive treatment with electrocorundum. The main part of the work presents the results of the conducted experimental studies. The effect of the surface treatment of the fibers was investigated through metallographic techniques, using a metallographic microscope and equipment to determine the surface roughness. On the other hand, the direct method of assessing the effectiveness of fiber anchoring in the concrete was determined using the pull-out test. The results of these studies were subjected to detailed analysis and statistical processing. The results of metallographic and pull-out tests indicate that the proposed method of treating the fibers significantly affects their anchoring efficiency in the concrete matrix. According to the author, this may be of great practical importance because the discussed method of treating the fibers can significantly improve the general properties of fibrocomposite mixtures.

Słowa kluczowe

EN

steel fibre; pull-out test; concrete; bond characteristics; roughness; fibre surface

• Wydawca: Politechnika Koszalińska
• Czasopismo: Rocznik Ochrona Środowiska
• Rocznik: 2022
• Tom: Tom 24
• Strony: 83--96
• Opis fizyczny: Bibliogr. 33 poz., rys., tab.

Twórcy

autor

Janikowska Dorota

• Koszalin University of Technology, Poland

• https://orcid.org/0000-0001-5861-8530

Bibliografia

• Abdallah, S., Fan, M., Zhou, X. (2016). Effect of Hooked-End Steel Fibres Geometry on Pull-Out Behaviour of Ultra-High Performance Concrete. Construction and Architectural Engineering, 10(12), 1594-1599.
• Abdallah, S., Fan, M., Zhou, M., Le Geyt, S. (2016) Anchorage Effects of Various Steel Fibre Architectures for Concrete Reinforcement. International Journal of Concrete Structures and Materials, 10(3), 325-335. DOI: 10.1007/s40069-016-0148-5
• Alwan, J.M., Naaman, A.E., Guerrero, P. (1993). Effect of mechanical clamping on the pull-out response of hooked steel fibers embedded in cementitious matrices. Concrete Science and Engineering, 1, 5-25.
• Alwan, J.M., Naaman, A.E., Hansen, W. (1991). Pull-Out Work of Steel Fibers From Cementitious Composites: Analytical Investigation. Cement & Concrete Composites, 13, 247-255.
• Beglarigale, A., Yazici, H. (2015). Pull-out behavior of steel fiber embedded in flowable RPC and ordinary mortar. Construction and Building Materials, 75, 255-265. DOI: 10.1016/j.conbuildmat.2014.11
• Chun, B., Kim, S., Yoo, D.-Y. (2021). Benefits of chemically treated steel fibers on enhancing the interfacial bond strength from ultra-high-performance concrete. Construction and Building Materials, 294, DOI: 10.1016/j.conbuildmat.2021.123519
• Chun, B., Yoo, D.-Y., Banthia, N. (2020). Achieving slip-hardening behavior of sanded straight steel fibers in ultra-high-performance concrete. Cement and Concrete Composites, 113, DOI: 10.1016/j.cemconcomp.2020.103669
• Cunha, V.M. C.F., Barros, J.A.O., Sena-Cruz, J.M. (2008). Bond-Slip Mechanisms of Hooked-End Steel Fibers in Self-Compacting Concrete. Materials Science Forum, 587-588, 877-881. DOI: 10.4028/www.scientific.net/msf.587-588.877
• Cunha, V.M.C.F. (2010). Steel Fibre Reinforced Self-Compacting Concrete (from Micro-Mechanics to Composite Behaviour). Portugal: Minho's University.
• Domski, J., Katzer, J., Zakrzewski, M., Ponikiewski, T. (2017). Comparison of the mechanical characteristics of engineered and waste steel fiber used as reinforcement for concrete. Journal of Cleaner Production, 158, 18-28. DOI: 10.1016/j.jclepro.2017.04.165
• Gray, R.J. (1983). Experimental techniques for measuring fibre/matrix interfacial bond shear strength. International Journal of Adhesion and Adhesives, 3, 197-202. DOI: 10.1016/0143-7496(83)90094-5
• Holschemacher, K., Mueller, T., Ribakov, Y. (2010). Effect of steel fibres on mechanical properties of high-strength concrete. Materials and Design, 31, 2604-2615. DOI: 10.1016/j.matdes.2009.11.025
• Jamroży, Z. (1985). Fibre reinforced concrete. Kraków: Cracow University of Technology Publishing House (in Polish).
• Katzer, J., Domski, J. (2012). Quality and mechanical properties of engineered steel fibres used as reinforcement for concrete. Construction and Building Materials, 34, 243-248. DOI: 10.1016/j.conbuildmat.2012.02
• Kim, D.J., Park, S.H., Ryu, G.S., Koh, K.T. (2011). Comparative flexural behavior of Hybrid Ultra High Performance Fiber Reinforced Concrete with different macro fibers. Construction and Building Materials, 25, 4144-4155. DOI: 10.1016/j.con-buildmat.2011.04
• Kim, D.J., El-Tawil, S., Naaman, A.E. (2010). Effect of Matrix Strength on Pullout Behavior of High-Strength Deformed Steel Fibers. ACI Special Publication, 272, 135-150. DOI: 10.14359/51664089
• Liu, T., Wei, H., Zhou, A., Zou, D., Jian, H. (2020). Multiscale investigation on tensile properties of ultra-high performance concrete with silane coupling agent modified steel fibers. Cement and Concrete Composites, 111, DOI: 10.1016/j.cemconcomp. 2020.103638
• Maage, M. (1977). Interaction between steel fibers and cement based matrixes. Matériaux et Construction, 10(59), 297-301. DOI: 10.1007/bf02478831
• Markovic, I. (2006). High-Performance Hybrid-Fibre Concrete. Netherlands: DUP Science.
• Naaman, A.E., Namur, G.G., Alwan, J.M., Najm, H.S. (1991). Fiber Pull-out and bond slip. I: analytical study. Journal of Structural Engineering, 117, 2769-2790.
• Nataraja, M.C., Dhang, N., Gupta, A.P. (2000). Toughness characterisation of steel fiber-reinforced concrete by JSCE approach. Cement and Concrete Research, 30, 593-597. DOI: 10.1016/s0008-8846(00)00212-x
• Oh, T., You, I., Banthia, N., Yoo, D.-Y. (2021). Deposition of nanosilica particles on fiber surface for improving interfacial bond and tensile performances of ultra-high-performance fiber-reinforced concrete. Composites Part B, 221, DOI: 10.1016/j. compositesb.2021.109030
• Pi, Z., Xiao, H., Du, J., Liu, M., Li, H. (2019). Interfacial microstructure and bond strength of nano-SiO2-coated steel fibers in cement matrix. Cement and Concrete Composites, 103, DOI: 10.1016/j.cemconcomp.2019.04.025
• PN-EN 1992-1-1:2008. Projektowanie konstrukcji z betonu. Reguły ogólne i reguły dla budynków.
• Soulioti, D.V., Barkoula, N.M., Paipetis, A., Matikas, T.E. (2011). Effects of Fibre Geometry and Volume Fraction on the Flexural Behaviour of Steel-Fibre Reinforced Concrete. Strain, 47, 535-541. DOI: 10.1111/j.1475-1305.2009. 00652.x
• Sujivorakul, C., Waas, A.M., Naaman, A.E. (2000). Pull-out response of a smooth fiber with an end anchorage. Journal of engineering mechanics, 126, 986-993. DOI: 10.1061/(asce)0733-9399(2000)126:9(986)
• Tattersall, G.H., Urbanowicz, C.R. (1974). Bond strength in steel-fIbre-reinforced concrete. Magazine of Concrete Research, 26(87), 105-113.
• Wiemer, N., Wetzel, A., Schleiting, M., Krooß, P., Vollmer, M., Niendorf, T., Böhm, S., Middendorf, B. (2020). Effect of Fibre Material and Fibre Roughness onthe Pull-out Behaviour of Metallic Micro Fibres Embedded in UHPC. Material, 13. DOI: 10.3390/ma13143128
• Won, J.-P., Hong, B.-T., Lee, S.-J., Choi, S.J. (2013). Bonding propertiesofamorphousmicro-steelfibre-reinforced cementitious composites. Composite Structures, 102, 101-109. DOI: 10.1016/j.compstruct.2013.02.015
• Yoo, D.-Y., Chun, B., Kim, J.-J. (2020). Bond performance of abraded arch-type steel fibers in ultra-high-performance concrete. Cement and Concrete Composites, 109, DOI: 10.1016/j.cemconcomp.2020.103538
• Zhu, Y., Zhang, Y., Qu, S., Kumar, A. (2020). Flexural and Tensile Strength of Ultra-High-Performance Concrete with ZnPh-Treated Steel Fibers. Journal of Materials in Civil Engineering, 32, 06020013-1 - 06020013-8. DOI: 10.1061/ (asce)mt.1943-5533.0003372
• Zile, E., Zile, O. (2013). Effect of the fiber geometry on the pull-out response of mechanically deformed steel fibers. Cement and Concrete Research, 44, 18-24. DOI: 10.1016/j.cemconres.2012.10.014
• Zych, T. (2010). Contemporary fibre reinforced concrete – possibility of forming of structural elements and architectural forms. Architektura Czasopismo Techniczne, 18, 371-386 (in Polish).

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).