Influence of Adhesive Compound Viscosity on the Strength Properties of 1.0503 Steel Sheets Adhesive Joints

• Autorzy: Miturska-Barańska Izabela , Rudawska Anna

Identyfikatory

DOI

10.12913/22998624/147314

• Języki publikacji: EN

Abstrakty

EN

The presented study concerned the comparison of the adhesive joints strengths of 1.0503 carbon steel sheets of higher quality, which were made using adhesive compounds characterized by different viscosity index of the components. Three types of commercial epoxy resins were used: Epidian 5, Epidian 53 and Epidian 57, as well as two types of curing agents: polyamide (PAC) and amine (Z-1). The surfaces of the test specimens were subjected to a pre-treatment operation in the process of a mechanical machining with an abrasive coated tool of P320 gradation. The surface roughness measurements were carried out as a control. The single-lap adhesive joints were the subject of the strength testing. The strength tests carried out on a Zwick/Roell Z150 testing machine concerned the comparison of the strength of the adhesive joints loaded in shear. Statistical analysis was performed on the results obtained. It was observed, among others, that the adhesive joints prepared with the epoxy adhesive compounds containing the polyamide curing agent showed much higher the shear strength than the adhesive joints made with the epoxy adhesive compounds containing the amine curing agent. Moreover, the use of the polyamide curing agent in the adhesive compounds with the epoxy resins resulted in formation of a more elastic adhesive layer, for which higher elongation was observed than in the case of the epoxy compound with the amine curing agent.

Słowa kluczowe

EN

adhesive joints; carbon steel; shear strength; epoxy adhesives; viscosity

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2022
• Tom: Vol. 16, no 2
• Strony: 196--205
• Opis fizyczny: Bibliogr. 48 poz., fig., tab.

Twórcy

autor

Miturska-Barańska Izabela

• Faculty of Mechanical Engineering, Lublin University of Technology, ul. Nadbystrzycka 36, 20-618 Lublin, Poland

• https://orcid.org/0000-0003-4140-4768

autor

Rudawska Anna

• Faculty of Mechanical Engineering, Lublin University of Technology, ul. Nadbystrzycka 36, 20-618 Lublin, Poland

• https://orcid.org/0000-0003-3592-8047

Bibliografia

• 1. Dillard D.A. Advances in structural adhesive bonding. Boca Raton, Fla.: CRC Press; 2010.
• 2. Silva L.F.M. da, Öchsner A., Adams R.D. Handbook of adhesion technology. Heidelberg: Springer; 2011.
• 3. Pizzi A., Mittal K.L. Handbook of adhesive technology. Third edition. Boca Raton London New York: CRC Press, Taylor & Francis Group; 2018.
• 4. Brockmann W. Adhesive bonding: materials, applications and technology. Weinheim: Wiley-VCH; 2009.
• 5. da Silva Lucas F.M., Carbas R.J.C., Critchlow G.W., Figueiredo M.A.V., Brown K. Effect of material, geometry, surface treatment and environment on the shear strength of single lap joints. International Journal of Adhesion and Adhesives. 2009; 29(6): 621–632.
• 6. Nieslony P., Krolczyk G.M., Wojciechowski S., Chudy R., Zak K., Maruda R.W. Surface quality and topographic inspection of variable compliance part after precise turning. Applied Surface Science. 2018; 434: 91–101.
• 7. Rudawska A., Maziarz M., Miturska I. Impact of Selected Structural, Material and Exploitation Factors on Adhesive Joints Strength. Kulisz M., Szala M., Badurowicz M., Cel W., Chmielewska M., Czyż Z., et al. MATEC Web Conf. 2019; 252: 01006.
• 8. Rudawska A., Zaleski K., Miturska I., Skoczylas A. Effect of the Application of Different Surface Treatment Methods on the Strength of Titanium Alloy Sheet Adhesive Lap Joints. Materials. 2019; 12(24): 4173.
• 9. Bresson G., Jumel J., Shanahan M.E.R., Serin P. Strength of adhesively bonded joints under mixed axial and shear loading. International Journal of Adhesion and Adhesives. 2012; 35: 27–35.
• 10. Grant L.D.R., Adams R.D., da Silva L.F.M. Effect of the temperature on the strength of adhesively bonded single lap and T joints for the automotive industry. International Journal of Adhesion and Adhesives. 2009; 29(5): 535–542.
• 11. Grant L.D.R., Adams R.D., da Silva L.F.M. Experimental and numerical analysis of single-lap joints for the automotive industry. International Journal of Adhesion and Adhesives. 2009; 29(4): 405–413.
• 12. Rudawska A, Celejewski F, Miturska I, Kowalska B. The adhesive joint strength after various times of seasoning. Plastics processing. 2016; 22(3): 126–131.
• 13. Chen Q., Zhao Y., Zhou Z., Rahman A., Wu X.-F., Wu W., et al. Fabrication and mechanical properties of hybrid multi-scale epoxy composites reinforced with conventional carbon fiber fabrics surface attached with electrospun carbon nanofiber mats. Composites Part B: Engineering. 2013; 44(1): 1–7.
• 14. de Bruyne N.A. The adhesive properties of epoxy resins. J Appl Chem. 2007; 6(7): 303–310.
• 15. Prolongo S.G., del Rosario G., Ureña A. Comparative study on the adhesive properties of different epoxy resins. International Journal of Adhesion and Adhesives. 2006; 26(3): 125–132.
• 16. Mimura K., Ito H. Characteristics of epoxy resin cured with in situ polymerized curing agent. Polymer. 2002; 43(26): 7559–7566.
• 17. Rudawska A., Czarnota M. Selected aspects of epoxy adhesive compositions curing process. Journal of Adhesion Science and Technology. 2013; 27(17): 1933–1950.
• 18. Miturska I., Rudawska A., Müller M., Valášek P. The Influence of Modification with Natural Fillers on the Mechanical Properties of Epoxy Adhesive Compositions after Storage Time. Materials. 2020; 13(2): 291.
• 19. Miturska-Barańska I., Rudawska A., Doluk E. The influence of sandblasting process parameters of aerospace aluminium alloy sheets on adhesive joints strength. Materials. 2021; 14(21): 6626.
• 20. Keibal N.A., Bondarenko S.N., Kablov V.F. Modification of adhesive compositions based on polychloroprene with element-containing adhesion promoters. Polym Sci Ser D. 2011; 4(4): 267–280.
• 21. Chikhi N., Fellahi S., Bakar M. Modification of epoxy resin using reactive liquid (ATBN) rubber. European Polymer Journal. 2002; 38(2): 251–264.
• 22. Mohan P. A critical review: The modification, properties, and applications of epoxy resins. PolymerPlastics Technol and Engin. 2013; 52(2): 107–125.
• 23. Brockmann H., Haufe M., Schulenburg J.O. Mechanism of the curing reaction of model epoxy compounds with monuron. International Journal of Adhesion and Adhesives. 2000; 20(4): 333–340.
• 24. Müller M., Valášek P., Rudawska A., Chotěborský R. Effect of active rubber powder on structural two-component epoxy resin and its mechanical properties. Journal of Adhesion Science and Technology. 2018; 32(14): 1531–1547.
• 25. Müller M., Valášek P., Rudawska A. Mechanical properties of adhesive bonds reinforced with biological fabric. Journal of Adhesion Science and Technology. 2017; 31(17): 1859–1871.
• 26. Yoon I.-N., Lee Y., Kang D., Min J., Won J., Kim M., et al. Modification of hydrogenated Bisphenol A epoxy adhesives using nanomaterials. International Journal of Adhesion and Adhesives. 2011; 31(2): 119–125.
• 27. Baldan A. Adhesion phenomena in bonded joints. International Journal of Adhesion and Adhesives. 2012; 38: 95–116.
• 28. Arnott D., Rider A., Mazza J. Surface Treatment and Repair Bonding. W: Advances in the Bonded Composite Repair of Metallic Aircraft Structure. Elsevier; 2002; 41–86.
• 29. Ebnesajjad S., Ebnesajjad C.F. Surface treatment of materials for adhesive bonding; 2014.
• 30. Ebnesajjad S., Handbook of adhesives and surface preparation: technology, applications and manufacturing. Amsterdam: William Andrew/Elsevier; 2011.
• 31. Kaczorowska E. Comparison of test methods adhesive strength test methods for different ways of preparing sample surfaces. Proceedings of the Aviation Institute. 2016; 244(3): 90–96.
• 32. Ribeiro Batista G., Barcellos D.C., Rocha Gomes Torres C. Effect of adhesive type and composite viscosity on the dentin bond strength. Journal of Adhesion Science and Technology. 2016; 30(8): 842–850.
• 33. PN-EN ISO 683-1:2018-09. Steels for quenching and tempering. Part 1: Non-alloy steels for quenching and tempering.
• 34. https://www.kronosedm.pl/stal-stal-c45-1-0503 [accessed 24.10.2019].
• 35. BN- 89 6376-02. Industry standard. Epoxy resins Epidian 1, 2, 3, 4, 5, 6. (in Polish)
• 36. Information catalogue of Ciech S.A. https://ciech-group.com/produkty/chemia-organiczna/zywice/zywice-epoksydowe/ [access: 20.02.2018].
• 37. BN-73 6376-01. Industry standard. Epoxy resins Epidian 51 i 53 (in Polish).
• 38. Bereska B., Iłowska J., Czaja K., Bereska A. Curing agents for epoxy resins. Chemical industry. 2014; 93(4): 443–448.
• 39. Godzimirski J. Structural bonding problems. Assembly Technology and Automation. 2009; (1): 25–31.
• 40. Derewonko A., Godzimirski J,, Kosiuczenko K, Niezgoda T,, Kiczko A. Strength assessment of adhesive-bonded joints. Computational Materials Science. 2008; 43(1): 157–164.
• 41. PN-EN ISO 25178. Product geometry specifications - Geometric structure of the surface: Spatial.
• 42. PN-EN 1465:2009. Adhesives - Determination of the tensile shear strength of lap joints.
• 43. ISO 10365:2022. Adhesives. Designation of main failure patterns.
• 44. Rudawska A, Miturska-Barańska I, Doluk E. Influence of surface treatment on steel adhesive joints strength-varnish coats. Materials. 2021; 14(22): 6938.
• 45. Comyn J. Adhesion science. 2nd edition. London: Royal Society of Chemistry; 2021; 166.
• 46. Doluk E., Rudawska A., Brunella V. The influence of technological factors on the strength of adhesive joints of steel sheets. Adv Sci Technol Res J. 2020; 14(1): 107–115.
• 47. Rudawska A. Selected aspects of the effect of mechanical treatment on surface roughness and adhesive joint strength of steel sheets. International Journal of Adhesion and Adhesives. 2014; 50: 235–243.
• 48. Miturska I., Rudawska A. Statistical interpretation of the results of measurements of the strength of adhesive joints of selected construction materials. Mechanic. 2016; 11: 1620–1623.