FEM and experimental based analysis of the stamping process of aluminum alloy

• Autorzy: Różyło P. , Wójcik Ł.

Identyfikatory

DOI

10.12913/22998624/70691

• Języki publikacji: EN

Abstrakty

EN

The subject of the study was aluminum samples of varying thickness. The aim of the study was to perform the experimental stamping process of the samples on a universal testing machine and a numerical analysis on two independent computer systems Abaqus® and Deform-3D. As part of the numerical analysis, bilinear material model was included, taking into account elastic and plastic characteristics. The study was conducted in a dynamic environment with geometric nonlinearity. The results obtained from experimental research were confronted with those obtained by FEM computer simulation. During the research, numerical model of the stamping process has been developed, which was validated with the results of experimental research.

Słowa kluczowe

EN

pressing; experimental study; numerical analysis; finite element method

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2017
• Tom: Vol. 11, no 3
• Strony: 94--101
• Opis fizyczny: Bibliogr. 12 poz., fig., tab.

Twórcy

autor

Różyło P.

• Lublin University of Technology, Mechanical Engineering Faculty, 36 Nadbystrzycka Str., 20-618 Lublin, Poland

autor

Wójcik Ł.

• Lublin University of Technology, Mechanical Engineering Faculty, 36 Nadbystrzycka Str., 20-618 Lublin, Poland

Bibliografia

• 1. Chang Q., Li D., Peng Y., Zeng X.: Experimental and numerical study of warm deep drawing AZ31 Magnesium alloy sheet, International Journal of Machine Tools and Manufacture 47, 436-443, 2007.
• 2. Chen F., Huong T., Chang C.: Deep drawing of square cups with magnesium alloy AZ31 sheets, International Journal of Machine tools and Manufacture 43, 1553-1559, 2003.
• 3. Isik K., Silva M., Tekkaya A., Martins P.: Formability limits by fracture in sheet metal forming, Journal of Materials Processing Technology 214, 1557-1565, 2014.
• 4. Jin J., Wang X., Deng L., Luo I.: A single - step hot stamping forging process for aluminum alloy shell parts with non-uniform thickness, Journal of Materials Processing Technology 228, 170-178 (2016).
• 5. Lonkwic P., Różyło P., Dębski H.: Numerical and experimental analysis of the progressive gear body with the use of finite-element method. Eksploatacja i Niezawodnosc – Maintenance and Reliability 2015, vol. 17, no. 4, p.544-550.
• 6. Lonkwic P., Różyło P.: Theoretical and experimental analysis of loading impact from the progressive gear on the lift braking distance with the use of the free fall method. Advances in Science and Technology - Research Journal, 10 (30), 2016, 103-109.
• 7. Mohamed M., Lin J., Foster A., Dean T., Dear J.: A new test design for assessing formability of ma-terials in hot stamping, Procedia Engineering 81, 1689-1694, 2014.
• 8. Mori K., Nishijima S., Tan C.J.: Two stage cold stamping of magnesium alloy cups having small corner radius, International Journal of Machine tools and Manufacture 49, 767-772, 2009.
• 9. Pereira M., Rolfe B.: Temperature conditions during cold sheet metal stamping, Journal of Materials Processing Technology 214, 1749-1758, 2014.
• 10. Romanowski W. P.: Poradnik obróbki plastycznej na zimno. WNT, Warszawa, 1976.
• 11. Rozylo P.: Optimization of I-section profile design by the finite element method. Advances in Science and Technology - Research Journal, 10 (29), 2016, 52-56.
• 12. Zienkiewicz O.C., Taylor R.L.: Finite Element Method (5th Edition) Volume 2 – Solid Mechanics, Elsevier, 2000.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)