Implementation of flat slab column reinforced concrete frames in low cost housing construction

• Autorzy: Onyshchenko V. , Pavlikov A. , Mykytenko S.
• Języki publikacji: EN

Abstrakty

EN

In research presents an analysis of flat slab column reinforced concrete frames in low cost housing construction. The features of precast flat slab column conduit within reinforced concrete frame building have been analyzed. The problems in designing flat slab column frame to improve its reliability are under consideration. Suggestions concerning the ways of improving flat slab column frame building calculations are presented. Precast flat slab column frame constructive system is promising for construction of residential and public buildings. In order to reduce the values of bending moments in the joints of columns, it is suggested to apply solid diaphragms with the functions of taking up the vertical loads in order to take up horizontal loads. It seems reasonable to define the required amount of reinforcement bars in plates by means of the kinematic limit equilibrium method.

Słowa kluczowe

EN

flat slab column conduit; reinforced concrete framework of building; low-cost housing

• Wydawca: Centrum Rzeczoznawstwa Budowlanego Sp. z o.o.
• Czasopismo: Inżynieria Bezpieczeństwa Obiektów Antropogenicznych
• Rocznik: 2016
• Tom: Nr 3
• Strony: 29--33
• Opis fizyczny: Bibliogr. 8 poz., fot., rys.

Twórcy

autor

Onyshchenko V.

• Poltava National Technical Yuri Kondratyuk University

autor

Pavlikov A.

• Poltava National Technical Yuri Kondratyuk University

autor

Mykytenko S.

• Poltava National Technical Yuri Kondratyuk University

Bibliografia

• 1. Blakey F.A., 1965, Towards an Australian structural form – the flat plate, Architecture in Australia, vol. 54, R. 115–127.
• 2. Description of the information system on NGOs "CUBE" [Electronic resource] – Access: http://kub-invest.ru/sist.html.
• 3. Description system "CUBE-2.5" [Electronic resource] – Access: http://www.pi2.ru.
• 4. Di Stasio J., 1941, Flat Plate Rigid Frame Design of Low Cost Housing Projects in Newark and Atlantic City, N. J. Proc. American Concrete Institute, vol. 37, p. 309–324.
• 5. Dorfman A. Э., 1975, Designing flat slab column conduit, A. Dorfman Э., LN Levontyn. – M. Stroiizdat, p. 124.
• 6. Features of structural systems prefabricated monolithic frame multi-storey buildings for social housing, 2009, A.M. Pavlikov, V.A. Pashynskyi, S.M. Mykytenko, M.N. Lip, E.M. Babich, B.M. Petter, Resource-saving materials, structures, buildings: Coll. Science. works. – Vyp. 20. – Exactly: NUWMNRU, p. 390–395.
• 7. Shakhnazaryan S.H, 1974, Erection of buildings by the method of lifting storeys and fllor slab panels. Research, Designing, construction, S.H. Shahnazaryan, R.O. Sahakyan, A.O. Sahakyan – M Stroiizdat, p. 368.
• 8. Unification of demountable system of solid jointless ossature without girders. Basic regulations on calculation, construction and layout of buildings: Call Work project in 9 issues. Series "CUBE-2.5". Issue 1-1. Firm "CUBE" joint-venture "In-Ex" Scientific and design construction association of cast-in-place construction (NSPO "Monolit"). – M. 1990, p. 49.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.