Determination of chemical composition and structure of YBa2Cu3O7-x – YBCO/Cu 2G HTS superconducting tape

• Autorzy: Jędryka J. , Szota M. , Nabiałek M. , Szota K. , Łukaszewicz A.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The paper concerns the determination of the chemical composition and structure of high-temperature superconducting tapes YBa2Cu3O7-x– YBCO/Cu 2G HTS. Design/methodology/approach: Studies were carried outusing a scanning electron microscope with a chemical composition analyser on prepared samples of a tape. Moreover, an abrasion resistance test which shown resistance to friction at 1, 2 and 3 hours by using ball-tester was carried out. The individual layers which are components of the test tape and depths of wipes which appeared after test on ball-tester were evaluated. Findings: Studies showed a lot of information about abrasion resistance of tapes. Hourly friction, using ceramic ball did not result in breakthrough coating. The investigation are carried out for one, two and three hours. They also confirmed the chemical compositions provided by the manufacturer, as well as describe the individual layers of examined superconducting tapes. Originality/value: Detailed studies in particular, on wear resistance of superconductors, which relate to the chemical composition of the tapes, and their construction carried out in the context of the article, may be a prelude to further research into the production of superconducting tapes that will show much greater resistance to abrasion. The essence of the problem is a construction base, in particular during the installation of such tapes, for example in the form of a transformer winding.

Słowa kluczowe

EN

high temperature; superconductor HTS; SEM-EDX; ball-tester

PL

temperatura wysoka; nadprzewodnik HTS; SEM-EDX; kulotester

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2014
• Tom: Vol. 70, nr 1
• Strony: 14--20
• Opis fizyczny: Bibliogr. 18 poz.

Twórcy

autor

Jędryka J.

• Institute of Materials Engineering, Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Częstochowa, Poland

autor

Szota M.

• Institute of Materials Engineering, Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Częstochowa, Poland

autor

Nabiałek M.

• Institute of Physics, Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Częstochowa, Poland

autor

Szota K.

• Institute of Mathematics, Faculty of Mechanical Engineering and Computer Science, Czestochowa University of Technology, Al. Armii Krajowej 21, 42-200 Częstochowa, Poland

autor

Łukaszewicz A.

• Institute of Materials Engineering, Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Częstochowa, Poland

Bibliografia

• [1] J.J. Sunol, J. Saurina, P. Bruna, Structural and thermal changes induced by mechanical alloying in a Fe-Ni based amorphous melt-spun alloy, Materials Chemistry and Physics 114/2-3 (2009) 996-999.
• [2] A. Urata, N. Nishiyama, K. Amiya, A. Inoue, Continuous casting of thick Fe-base glassy plates by twin-roller melt-spinning, Materials Science and Engineering A 449-451 (2007) 269-272.
• [3] C.C. Clickner, J.W. Ekin, N. Cheggour, C.L.H. Thieme, Y. Qiao, Y.Y. Xie, A. Goyal, Mechanical properties of pure Ni and Ni-alloy substrate materials for Y-Ba-Cu-O coated superconductors, Cryogenics 46 (2006) 432-438.
• [4] http://www.superpower-inc.com
• [5] http://www.amsc.com [6] D.Q. Shi, M.J. Qin, J.H. Kim, M.Y. Zhu, S.X. Dou, Superconducting properties of coated conductor grown by RABiTS on Ni-Mn tape, Physica C 460-462 (2007) 1392-1393.
• [7] Y. Zhang, R.C. Duckworth, T.T. Ha, M.J. Gouge, Solder ability study of RABiTS-based YBCO coated conductors, Physica C 471/15-16 (2011) 437-443. [8] J. Eickemeyer, D. Selbmann, R. Opitz, V. Subramanya Sarma, B. Holzapfel, L. Schulz, Nickel DABiTS-tapes as a promising alternative to RABiTS-tapes, Physica C 408-410 (2004) 906-907.
• [9] Y. Yamada, S. Miyata, M.Yoshizumi, H. Fukushima, A. Ibi, T. Izumi, Y. Shiohara, T. Kato, T. Hirayama, Long IBAD-MgO and PLD coated conductor, Physica C 469 (2009) 1298-1302.
• [10] Y. Sutoh, K. Kakimoto, N. Kaneko, Y. Iijima, T. Saitoh, Mechanical bending property of YBCO coated conductor by IBAD/PLD, Physica C 426-431 (2005) 933-937.
• [11] P.N. Arendt, S.R. Foltyn, L. Civale, R.F. DePaula, P.C. Dowden, J.R. Groves, T.G. Holesinger, Q.X. Jia, S. Kreiskott, L. Stan, I. Usov, H. Wang, J.Y. Coulter, High critical current YBCO coated conductors based on IBAD MgO, Physica C 412-414 (2004) 795-800.
• [12] S. Hanyu, C. Tashita, Y. Hanada, T. Hayashida, H. Kutami, M. Igarashi, H. Fuji, K. Kakimoto, Y. Iijima, T. Saitoh, IBAD-MgO buffer layers for coated conductors in the large-scale system, Physica C 469 (2009) 1364-1366.
• [13] T. Manabe, W. Kondo, I. Yamaguchi, M. Sohma, T. Tsuchiya, K. Tsukada, S. Mizuta, T. Kumagai, Critical current density and microwave surface resistance of 5-cm-diameter YBCO films on LaAlO3substrates prepared by MOD using an infrared image furnace, Physica C 417(2005) 98-102.
• [14] K.C. Chung, Y.K. Kim, X.L. Wang, S.X. Dou, Texture analysis of RF-sputtered CeO2buffer layers and superconducting MOD-YBCO films, Physica C 470 (2010) 225-227.
• [15] T. Izumi, Y. Tokunaga, H. Fuji, R. Teranishi, J. Matsuda, S. Asada, T. Honjo, Y. Shiohara, T. Muroga, S. Miyata, T. Watanabe, Y. Yamada, Y. Iijima, T. Saitoh, T. Goto, A. Yoshinaka, A. Yajima, Progress in development of coated conductors by TFA–MOD processing, Physica C 412-414 (2004) 885-889.
• [16] M. Sohma, T. Tsuchiya, K. Tsukada, I. Yamaguchi, T. Manabe, T. Kumagai, K. Koyanagi, T. Ebisawa, H. Ohts, Preparation of YBCO films by an excimer-laser-assisted MOD by scanning irradiation, Physica C 463-465 (2007) 891-894. [17] T. Taneda, K. Muranaka, K. Fujino, K. Ohmatsu, H. Takei, Y. Sato, S. Honjo, Y. Takahashi, Enhancement of Jc and crystal alignment by reverse ISD method, Physica C 378-381 (2002) 944-949.
• [18] M. Li, B. Ma, R.E. Koritala, B.L. Fisher, K. Venkataraman, V.A. Maroni, V. Vlasko-Vlasov, P. Berghuis, U. Welp, K.E. Gray, U. Balachandran, Pulsed laser deposition of c-axis untilted YBCO films on c-axis tilted ISD MgO-buffered metallic substrates, Physica C 387 (2003) 373-381.