The Tribological Properties and the Microstructure Investigations of Tin Babbit with Pb Addition after Heat Treatment

• Autorzy: Leszczyńska-Madej B. , Madej M.

Identyfikatory

DOI

10.1515/amm-2016-0300

• Języki publikacji: EN

Abstrakty

EN

The results of tribological tests and microstructure examinations of tin babbit with 1.5 % Pb addition after heat treatment are presented in this paper. The specimens were annealed at 150°C for 2, 8, 24 and 48 hours and then tested for wear resistance and Brinell hardness. The wear tests were carried out using a block-on-ring tester operating under dry and wet conditions. The samples were also investigated by light microscopy (LM) and scanning electron microscopy (SEM).

Słowa kluczowe

EN

tribological properties; microstructure investigations; heat treatment

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 4
• Strony: 1861--1868
• Opis fizyczny: Bibliogr. 8 poz., rys., tab., wykr.

Twórcy

autor

Leszczyńska-Madej B.

• AGH University of Science and Technology, Faculty of Non-Ferrous Metals, Al. A. Mickiewicza 30, 30-059 Krakow, Poland

autor

Madej M.

• AGH University of Science and Technology, Faculty of Metals Engineering and Computer Science, Al. A. Mickiewicza 30, 30-059 Krakow, Poland

Bibliografia

• [1] N. P. Barykin, F. A. Sadykov, I. R. Aslanyan, Trenie Iznos 21, (6), 127-131 (2000).
• [2] B. A. Potekhin, V. V. Il’yushin, A. S. Khristolyubov, Materials Science and Heat Treatment 51, (7-8), 378-382 (2009).
• [3] F. A. Sadykov, N. P. Barykin, I. Sh. Valeev, V. N. Danilenko, Journal of Materials Engineering and Performance 12, 29- 36 (2003).
• [4] B. Leszczyńska-Madej, M. Madej, Archives of Metallurgy and Materials 56, (3), 805-812 (2011).
• [5] B. Leszczyńska-Madej, M. Madej, Kovove Mater. 51, 1-10 (2013).
• [6] N. P. Barykin, R.F. Fazlyakhmetov, A. Kh. Valeeva, Material Science and Heat Treatment 48, (1-2), 88- 91 (2006)
• [7] PN-ISO 4381:1997 Standard
• [8] B. Predel, Phase equilibria, crystallographic and thermodynamic data of binary alloys 5, Berlin Heidelberg, Springer – Verlag (1998)