The use of resistance sensors to measurement of shape charge parameters

• Autorzy: Wiśniewski A.
• Języki publikacji: EN

Abstrakty

EN

In the article different methods of measurement of the collapsing liner parameters and the formation of the shape charge jet by resistance sensor which was placed inside the shape charge are presented. The speed and acceleration change while reducing of resistance sensor length for shape charge in casing and without it for the different angles of the shape charge liner is analyzed. The resistance sensor placed in the shape charge liner permitted to register the parameters which cannot be obtained by the X-ray impulse apparatus. By the resistance sensor placed at the angle to the shape charge axis or perpendicular to the internal surface of the shape charge liner, the reducing shape charge liner parameters were registered. The resistance sensor placed on the shape charge axis enabled to register the parameters of the jet forming in the shape charge. In case of placing of resistance sensor on shape charge casing, the graphs become more stable in comparison with the graphs obtained when resistance sensor was placed inside shape charge.

Słowa kluczowe

EN

methods measurement; collapsing liner parameters; resistance change

• Wydawca: Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
• Czasopismo: Materiały Wysokoenergetyczne
• Rocznik: 2010
• Tom: T. 2
• Strony: 7--14
• Opis fizyczny: Bibliogr. 6 poz., rys., tab.

Twórcy

autor

Wiśniewski A.

• Military Institute of Armament Technology, 7 Wyszyńskiego str., 05-220 Zielonka, PL

Bibliografia

• [1] Bakalarski J., Madej W., Wiśniewski A., The reflectoscope research of the hollow charge by the X-ray apparatus and influence of the detected defects on the armour penetration depth. Armament Technology and Radiolocation Problems. WITU. Exercise book 13, 1975.
• [2] Kupidura Z., Nowak H., Wiśniewski A., The projecting and the results of the hollow charge research for the single use grenade launcher. Armament Technology and Radiolocation Problems. Exercise book 25, 1975.
• [3] Wiśniewski A., The research of the energy explosive shaped charge. WITU. 1978, not published.
• [4] Wiśniewski A., Krzyżowski Z., The electronic system for the continuous measurement of the quick processes parameters. Patent PL No 123342, 1982.
• [5] Wiśniewski A., Armours - Construction, Designing and Research. Scientific and Technical Publishing House, Warsaw, 2001, (in Polish).
• [6] Wiśniewski A., Żurowski W., Ammunition and Armours. Radom University of Technology, Radom, 2001, (in Polish).