PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Study on mechanical acoustic emission sources in fresh concrete

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Acoustic emission testing has proven very useful as a non-invasive monitoring method for several material processes. Recently several studies have emerged related to fresh concrete monitoring, as AE has the sensitivity to record waves from many different processes, even though no external load is applied to the specimens. Due to the complexity of the activity including among others formation of hydrates, settlement, water migration, early age cracking, the accumulated AE cannot be easily explained. In the present paper, two mechanisms of mechanical origin (aggregate and bubble movement through the paste) are isolated and the characteristics of their emissions are studied. Experimental results are complemented with numerical simulations to enhance the understanding due to the complexity of the wave propagation problem.
Słowa kluczowe
Rocznik
Strony
742--754
Opis fizyczny
Bibliogr. 27 poz., fot., rys., tab., wykr.
Twórcy
autor
  • Department of Mechanics of Materials and Constructions, Vrije Universiteit Brussel, Pleinlaan 2, 1050 Brussels, Belgium
  • Magnel Laboratory for Concrete Research, Department of Structural Engineering, Ghent University, Technologiepark- Zwijnaarde 904, B-9052 Ghent, Belgium
  • Magnel Laboratory for Concrete Research, Department of Structural Engineering, Ghent University, Technologiepark- Zwijnaarde 904, B-9052 Ghent, Belgium
  • Department of Mechanics of Materials and Constructions, Vrije Universiteit Brussel, Pleinlaan 2, 1050 Brussels, Belgium
Bibliografia
  • [1] C.U. Grosse, M. Ohtsu, Acoustic Emission Testing, Springer, Berlin, 2008.
  • [2] P.E. Mix, Introduction to Nondestructive Testing: A Training Guide, John Wiley & Sons, Inc., Hoboken, NJ, 2005.
  • [3] C. Grosse, D. Aggelis, T. Shiotani:, Concrete structures, in: M. Ohtsu (Ed.), Innovative AE and NDT Techniques for On-Site Measurement of Concrete and Masonry Structures, RILEM State-of-the-Art Report 20, Springer, Berlin/Heidelberg, 2016 5–25. , http://dx.doi.org/10.1007/978-94-017-7606-6.
  • [4] RILEM Technical Committee (Masayasu Ohtsu), Recommendations of RILEM Technical Committee 212-ACD: acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete: test method for damage qualification of reinforced concrete beams by acoustic emission, Mater. Struct. 43 (9) (2010) 1183–1186. , http://dx.doi.org/10.1617/s11527-010-9640-6.
  • [5] T. Shiotani, Chapter 4 Parameter analysis, in: C.U. Grosse, M. Ohtsu (Eds.), Acoustic Emission Testing, Springer, Berlin, 2008 41–51.
  • [6] B. Goszczyńska, G. Świt, W. Trąmpczyński, A. Krampikowska, J. Tworzewska, P. Tworzewski, Experimental validation of concrete crack identification and location with acoustic emission method, Arch. Civil Mech. Eng. 12 (1) (2012) 23–28.
  • [7] T. Suzuki, M. Ohtsu, Quantitative damage evaluation of structural concrete by a compression test based on AE rate process analysis, Constr. Build. Mater. 18 (3) (2004) 197–202.
  • [8] J.P. McCrory, S.K. Al-Jumaili, D. Crivelli, M.R. Pearson, M.J. Eaton, C.A. Featherston, M. Guagliano, K.M. Holford, R. Pullin, Damage classification in carbon fibre composites using acoustic emission: a comparison of three techniques, Compos. B: Eng. 68 (2015) 424–430.
  • [9] A.C. Mpalaskas, I. Vasilakos, T.E. Matikas, H.K. Chai, D.G. Aggelis, Monitoring of the fracture mechanisms induced by pull-out and compression in concrete, Eng. Fract. Mech. 128 (2014) 219–230.
  • [10] R. Vidya Sagar, B.K. Raghu Prasad, A review of recent developments in parametric based acoustic emission techniques applied to concrete structures, Nondestruct. Test. Eval. 27 (1) (2012) 47–68.
  • [11] A.C. Mpalaskas, T.E. Matikas, D. Van Hemelrijck, G.S. Papakitsos, D.G. Aggelis, Acoustic emission monitoring of granite under bending and shear loading, Arch. Civil Mech. Eng. 16 (3) (2016) 313–324.
  • [12] G.C. McLaskey, S.D. Glaser, C.U. Grosse, Integrating broad- band high-fidelity acoustic emission sensors and array processing to study drying shrinkage cracking in concrete, in: Proceedings of SPIE – The International Society for Optical Engineering, 6529 PART 1, 2007, http://dx.doi.org/10.1117/ 12.715055, art. no. 65290C.
  • [13] T. Shiotani, J. Bisschop, J.G.M. Van Mier, Temporal and spatial development of drying shrinkage cracking in cement-based materials, Eng. Fract. Mech. 70 (2003) 1509–1525.
  • [14] L. Pazdera, L. Topolar, M. Korenska, J. Smutny, V. Bilek, Advanced analysis of acoustic emission parameters during the concrete hardening for long time, in: 11th European Conference on Non-Destructive Testing (ECNDT 2014), October 6–10, Prague, Czech Republic, 2014 http://www.ndt. net/events/ECNDT2014/app/content/Paper/384_Pazdera.pdf.
  • [15] T.J. Chotard, J. Barthelemy, A. Smith, N. Gimet-Breart, M. Huger, D. Fargeot, C. Gault, Acoustic emission monitoring of calcium aluminate cement setting at the early age, J. Mater. Sci. Lett. 20 (2001) 667–669.
  • [16] K. Van Den Abeele, W. Desadeleer, G. De Schutter, M. Wevers, Active and passive monitoring of the early hydration process in concrete using linear and nonlinear acoustics, Cem. Concr. Res. 39 (2009) 426–432.
  • [17] V.R. Skal's'kyi, P.M. Koval', O.M. Serhienko, Yu.L. Lotots'kyi, Investigation of the solidification of concrete according to the signals of acoustic emission, Mater. Sci. 40 (5) (2004) 698–701.
  • [18] P. Lura, J. Couch, O. Mejlhede Jensen, J. Weiss, Early-age acoustic emission measurements in hydrating cement paste: evidence for cavitation during solidification due to self-desiccation, Cem. Concr. Res. 39 (2009) 861–867.
  • [19] V.V. Bardakov, A.I. Sagaidak, Forecasting of concrete strength during the hardening process by means of Acoustic Emission method, PROGRESS in ACOUSTIC EMISSION XVIII, in: T. Shiotani, S. Wakayama, M. Enoki, S. Yuyama (Eds.), Proceedings of the 23rd International Acoustic Emission Symposium, the Inauguration Conference of International Institute of Innovative Acoustic Emission & the 8th International Conference on Acoustic Emission JSNDI & IIIAE, 2016.
  • [20] L. Qin, H.-W. Ren, B.-Q. Dong, F. Xing, Acoustic emission behavior of early age concrete monitored by embedded sensors, Materials 7 (2014) 6908–6918. , http://dx.doi.org/ 10.3390/ma7106908.
  • [21] L. Topolár, L. Pazdera, B. Kucharczyková, J. Smutný, K. Mikulášek, Using acoustic emission methods to monitor cement composites during setting and hardening, Appl. Sci. 7 (5) (2017) 451, http://dx.doi.org/10.3390/app7050451.
  • [22] M. Ohtsu, Chapter 5: Acoustic emission in concrete of early-age, in: H.-W. Reinhardt, C. Grosse (Eds.), Advanced testing of cement-based materials during setting and hardening. RILEM Report 31, RILEM Publ. S.A.R.L., Cachan ENS, 2005, , ISBN: 2912143705, ca. 341p..
  • [23] E. Dzaye, G. De Schutter, D.G. Aggelis, Early-age monitoring of fresh cementitious material by acoustic emission, in: Proceedings of the 2nd International RILEM/COST Conference on Early Age Cracking and Serviceability in Cement-based Materials and Structures, PRO 120, RILEM Publications S.A.R.L., (2009) 417–422.
  • [24] S.N. Iliopoulos, Y.E. Khattabi, D.G. Aggelis, Towards the establishment of a continuous nondestructive monitoring technique for fresh concrete, J. Nondestr. Eval. 35 (3) (2016), http://dx.doi.org/10.1007/s10921-016-0355-7, article no. 37.
  • [25] M. Ohtsu, M. Yamada, T. Sonoda, Quantitative evaluation of SIBIE procedure and case studies, Constr. Build. Mater. 48 (2013) 1248–1254. , http://dx.doi.org/10.1016/j.conbuildmat.2012.12.003.
  • [26] http://www.cyberlogic.org/wave2000.html (accessed July 2017).
  • [27] D.G. Aggelis, T.P. Philippidis, Ultrasonic wave dispersion and attenuation in fresh mortar, NDT & E Int. 37 (8) (2004) 617– 631.http://dx.doi.org/10.1016/j.ndteint.2004.04.002.
Uwagi
PL
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019)
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-27af4548-7293-4c03-8192-7031788a8af7
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.