Tytuł artykułu
Autorzy
Identyfikatory
Warianty tytułu
Cement composites containing mixed dust from cement manufacturing process. Part II
Języki publikacji
Abstrakty
Artykuł obejmuje tematykę wykorzystania jako składnika kompozytów cementowych pyłów powstających podczas produkcji cementu (CD). W badaniach zastosowana została mieszanina pyłów z odpylania pieca (Cement Kiln Dust – CKD) oraz pyłów z filtrów by-passowych (Cement Bypass Dust – CBPD). Głównym celem jest sprawdzenie wpływu pyłów cementowych na właściwości kompozytów zawierających cementy portlandzki i wapniowo-siarczanoglinianowy. Artykuł podzielony jest na 2 części. W części pierwszej – przeglądowej – dokonano opisu aktualnego stanu wiedzy (PB 7/2024). Przywołane zostały wyniki badań wpływu pyłów cementowych na właściwości zapraw i mieszanek betonowych. Dodatkowo przedstawiono charakterystykę składników użytych do przygotowania zapraw oraz metodykę badań według obowiązujących norm. W części drugiej – badawczej – przedstawione zostały rezultaty badań wraz z dyskusją wyników oraz zostały sformułowane wnioski. Wyniki badań wskazują na korzystny wpływ niewielkich ilości mieszaniny pyłów na właściwości zapraw. W porównaniu do składu referencyjnego parametry badanych zapraw z pyłami cementowymi nie uległy znaczącemu pogorszeniu. Można zatem uznać, że stosowanie niewielkich ilości pyłów cementowych w kompozytach cementowych jest uzasadnione z punktu widzenia technicznego. Skurcz osiąga najkorzystniejsze wartości przy zastosowaniu mniejszych ilości CD w pierwszych dniach dojrzewania. Po 28 dniach wszystkie próbki wykazały pęcznienie, a najmniejsze było przy największej ilości CD. Można więc uznać, że optymalizacja składu spoiwa powinna brać pod uwagę kompromis między wytrzymałością a skurczem/pęcznieniem. W pracy oprócz aspektu technicznego podkreślono znaczenie ekologiczne takiego zastosowania pyłów i rodzajów spoiw w kompozytach.
The article covers the subject of using dusts generated during cement manufacturing (CD) as an ingredient in cement composites. Mixed Cement Kiln Dust (CKD) and Cement Bypass Dust (CBPD) were used in research. The main objective is to examine the effect of mixed cement dusts on the properties of composites containing Portland and calcium-sulfate-aluminate cements. The article is divided into two parts – the first one contains review and describes the current state of the art (PB 7/2024). The results of studies of the effect of cement dusts on the properties of mortars and concrete mixes are recalled. Additionally the characteristics of the ingredients used in the preparation of mortars and the test methodology according to current standards are presented. In the second part the results of the research are presented along with a discussion of the results, and the conclusions are formulated. The results of the study indicate a beneficial effect of small amounts of dust on the properties of mortars. Compared to the reference composition, the parameters of the tested mortars containing cement dust did not significantly deteriorate. Therefore, it can be concluded that the use of small amounts of cement dust in cement composites is justified from the technical point of view. Shrinkage reaches the most favorable values when using smaller amounts of CD in the first days of curing. After 28 days, all samples showed swelling, and the least swelling was with the highest amount of CD. Thus, it can be concluded that the optimization of the binder composition should take into account the trade-off between strength and shrinkage/swelling. In addition to the technical aspect, the paper emphasizes the ecological importance of such use of dusts and various binders in cement composites.
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
136--139
Opis fizyczny
Bibliogr. 8 poz., il.
Twórcy
autor
- Wydział Budownictwa, Politechnika Śląska
autor
- Wydział Budownictwa, Politechnika Śląska
Bibliografia
- [1] Al-Harthy A. S., Taha R., Al-Maamary F., Effect of Cement Kiln Dust (CKD) on Mortar and Concrete Mixtures, Construction and Building Materials 17, 2003, str. 353-360, doi:10.1016/S0950-0618(02)00120-4
- [2] Ashteyat A. M., Haddad R. H., Obaidat Y. T., Case Study on Production of Self Compacting Concrete Using White Cement by Pass Dust Case Studies in Construction Materials 9/2018, e00190, doi:10.1016/J.CSCM.2018. E00190
- [3] Najim K. B., Mahmod Z.S., Atea A. K. M., Experimental Investigation on Using Cement Kiln Dust (CKD) as a Cement Replacement Material in Producing Modified Cement Mortar, Construction and Building Materials 55, 2014, str. 5-12, doi:10.1016/J.CONBUILDMAT.2014.01.015
- [4] Sadek D. M., El-Attar M. M., Ali A. M., Physico-Mechanical and Durability Characteristics of Concrete Paving Blocks Incorporating Cement Kiln Dust, Construction and Building Materials 157, 2017, str. 300-312, doi:10.1016/J.CONBUILDMAT.2017.09.107
- [5] Tkaczewska E., Wpływ pyłu z instalacji bypassa pieca cementowego na właściwości cementu dojrzewającego w warunkach normalnych i autoklawizacji, Structure and Environment 11/2019, str. 5-22
- [6] Tkaczewska E., Łój G., Frątczak A., The Influence of Cement Kiln By-Pass Dust Addition on the Properties of Portland and Slag Cement. Cement-Wapno-Beton = Cement Lime Concrete 26, 2021, str. 24-34, doi:10.32047/CWB.2021.26.1.3
- [7] Udoeyo F. F., Hyee A., Strengths of Cement Kiln Dust Concrete, Journal of Materials in Civil Engineering 14, 2002, str. 524-526, doi:10.1061/(ASCE)-08991561(2002)14:6(524)
- [8] Ashteyat A. M., Ramadan K. Z., Haddad R. H., Qudah A., Properties of Portland Cement Mortar Incorporating White Cement Bypass Dust. Canadian Journal of Civil Engineering 38, 2011, str. 1355-1362, doi:10.1139/L11-100
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-276a3b15-3293-4c78-bdf0-b2ea5e5cf05c
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.