Modelling of a temporary temperature field during arc weld surfacing of steel elements taking into account heat of the weld

• Autorzy: Winczek J. , Rygał G.

Identyfikatory

DOI

10.17512/jamcm.2015.1.11

• Języki publikacji: EN

Abstrakty

EN

In this work, a model of a temperature field in a steel element during a singlepass arc weld surfacing is presented. Analytical solution for half-infinite body model is obtained by aggregating temperature increments caused by applying liquid metal and heat radiation of a moving electrode. The assumptions are Gaussian distributed heat sources of applied metal and the weld and of an electric arc heat source. Computations of the temperature field were carried out during arc weld surfacing of cuboidal steel element. The results are presented as temporary and maximum temperature distribution in the element’s crosssection and thermal cycles at selected points. The accuracy of the solution is verified comparing a calculated fusion line to that obtained experimentally.

Słowa kluczowe

EN

modeling; arc weld surfacing; temperature field

PL

modelowanie; pole temperatury

• Wydawca: Wydawnictwo Politechniki Częstochowskiej
• Czasopismo: Journal of Applied Mathematics and Computational Mechanics
• Rocznik: 2015
• Tom: Vol. 14, nr 1
• Strony: 111--120
• Opis fizyczny: Bibliogr. 17 poz., rys.

Twórcy

autor

Winczek J.

• Faculty of Mechanical Engineering and Computer Science, Czestochowa University of Technology Czestochowa, Poland

autor

Rygał G.

• Pedagogical Faculty, Jan Dlugosz University in Czestochowa, Poland

Bibliografia

• [1] Parkitny R., Pawlak A., Piekarska W., Thermal model of submerged arc welding process, Mat. Science Technol. 1992, 8, 841-843.
• [2] Lindgren L.E., Computational Welding Mechanics. Thermomechanical and Microstructural Simulations, Woodhead Publishing Ltd., Cambridge 2007.
• [3] Nguyen N.T., Thermal Analysis of Welds, WITPress, Southampton, Boston 2004.
• [4] Goldak J.A., Akhlaghi M., Computational Welding Mechanics, Springer, New York 2010.
• [5] Piekarska W., Kubiak M., Theoretical investigations into heat transfer in laser-welded steel sheets, J. Them. Anal. Calorim 2012, 110, 159-166.
• [6] Joshi S., Hildebrand J., Aloraier A.S., Rabczuk T., Characterization of material properties and heat source parameters in welding simulation of two overlapping beads on a substrate plate, Comp. Mater. Sci. 2013, 69, 559-565.
• [7] Ghosh A., Barman N., Chattopadhyay H., Hloch S., A study of thermal behaviour during submerged arc welding, Strojniški vestnik - J. Mech. Eng. 2013, 59(5), 333-338.
• [8] Jeong S.K., Cho H.S., An analytical solution for transient temperature distribution in fillet arc welding including the effect of molten metal, Proceedings of Institution of Mechanical Engineers, Journal of Engineering Manufacture 1997, 211B, 63-72.
• [9] Kang S.H., Cho H.S., Analytical solution for transient temperature distribution in gas tungsten arc welding with consideration of filler wire, Proceedings of Institution of Mechanical Engineers. J. Eng. Manuf. 1999, 213B, 799-811.
• [10] Klimpel A., Balcer M., Klimpel A.S., Rzeźnikiewicz A., The effect of the method and parameters in the GMA surfacing with solid wires on the quality of pudding welds and the content of the base material in the overlay, Weld. Int. 2006, 11, 845-850.
• [11] Radaj D., Heat Effects of Welding. Temperature Field, Residual Stress, Distortion, Springer- -Verlag, Berlin, Heidelberg, New York, London, Paris, Tokyo 1992.
• [12] Easterling K.E., Modelling the weld thermal cycle and transformation behaviour in the heat affected zone, [in:] Mathematical Modelling of Weld Phenomena, eds. H.K.E. Cerjak, K.R. Easterling, The Institute of Materials, London 1993.
• [13] Winczek J., Analytical solution to transient temperature field in a half-infinite body caused by moving volumetric heat source, Int. J. Heat Mass Transfer 2010, 53, 5774-5781.
• [14] Winczek J., Modelling of heat affected zone in cylindrical steel elements surfaced by welding, Appl. Math. Model. 2012, 36, 1514-1528.
• [15] Vishnu P.R., Li W.B., Easterling K.E., Heat-flow model for pulsed welding, Mat. Sci. Technol. 1991, 7, 649-659.
• [16] Modenesi P.J., Reis R.I., A model for melting rate phenomena in GMA welding, J. Mater. Proc. Technol. 2007, 189, 199-205.
• [17] Hrabe P., Choteborsky R., Navratilova M., Influence of welding parameters on geometry of weld deposit bead, Int. Conf. Economic Eng. Manuf. Systems, Brasov, 26-27 November 2009, Regent, 10, 3(27), 291-294.