Possibilities of improving the thermal protection of residential buildings by the application of over-rafter roof insulation systems

• Autorzy: Respondek Zbigniew

Identyfikatory

DOI

10.2478/cqpi-2021-0027

• Języki publikacji: EN

Abstrakty

EN

The need to save energy, as well as the constant tightening of regulations regarding thermal protection of buildings force the need to look for solutions increasing the thermal performance of building envelopes. One of the important issues in this regard is the appropriate thermal insulation of usable attics. Currently, two layers of mineral wool are most often used - one between the rafters and the other under the rafters. Recently, an alternative solution has emerged, namely PIR (polyisocyanurate) foam over-rafter roof insulation systems. The aim of the article is to assess the legitimacy of using this new method of roof slope insulation. Appropriate conclusions were formulated on the basis of the technical and economic analysis of PIR foam parameters and other insulation materials, and a case study in which one of the actual implementations of the over-rafter insulation was analyzed. It was found that the use of PIR panels as the external insulation of roof slopes gives benefits primarily in terms of improving the quality of thermal insulation works. The over-rafter system is easier to implement than the classical solution (fewer possibilities of assembly errors), and above all, it minimizes thermal bridges. In addition, PIR has a better thermal conductivity than mineral wool, which reduces the necessary insulation thickness, and the possibility of condensation inside the envelope and cold air infiltration is also limited. The barrier to the use of this solution is currently primarily the high price of PIR roof panels, but as shown, the benefits associated with improving the quality of insulation are taken into account and encourage investors to choose such a solution.

Słowa kluczowe

EN

energy-efficient building; quality of construction works; PIR roof panel; thermal insulation of roof

PL

budynek energooszczędny; jakość robót budowlanych; płyta dachowa PIR; ocieplenie dachu

• Wydawca: De Gruyter
• Czasopismo: Quality Production Improvement - QPI
• Rocznik: 2021
• Tom: Vol. 3, Iss. 1
• Strony: 283--292
• Opis fizyczny: Bibliogr. 20 poz., rys., tab.

Twórcy

autor

Respondek Zbigniew

• Czestochowa University of Technology, Faculty of Civil Engineering, Poland

• https://orcid.org/0000-0003-0204-5061

Bibliografia

• 1.Berardi U., 2019. The impact of aging and environmental conditions on the effective thermal conductivity of several foam materials, Energy 182, 777-794, DOI: https://doi.org/10.1016/j.energy.2019.06.022
• 2.Brycht N., Respondek Z., 2018. Analiza cech zabudowy mieszkaniowej na terenach wiejskich w regionie częstochowskim, Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo, 24, 36-41, DOI: 10.17512/znb.2018.1.06
• 3.Gravit, M., Kuleshin A., Khametgalieva E., Karakozova I., 2017. Technical characteristics of rigid sprayed PUR and PIR foams used in construction industry. IOP Conf. Series: Earth and Environmental Science, 90, 01287, DOI: 10.1088/1755- 1315/90/1/012187
• 4. Ingaldi M., Dziuba, S.T., 2018. Ocena ekoświadomości mieszkańców Jury KrakowskoCzęstochowskiej, Quality Production Improvement, 1(8), 148-159, DOI: 10.30657/qpi.2018.09.10
• 5.Investor’s photos, 2020. Photographic documentation from the implementation stage, provided by the investor
• 5.Investor’s photos, 2020. Photographic documentation from the implementation stage, provided by the investor
• 6.Kanchanapiya, P., Methacanon P., Tantisattayakul T., 2018. Techno economic analysis of light weight concrete block development from polyisocyanurate foam waste, Resources, Conservation and Recycling 138, 313-325, DOI: https://doi.org/10.1016/j.resconrec.2018.07.027
• 7.Kurańska, M., Prociak, A., Kirklups, M., Cabulis, U., 2015. Polyurethane-polyisocyanurate foams modified with hydroxyl derivatives of rapeseed oil, Industrial Crops and Products. 74, 849-857, DOI: https://doi.org/10.1016/j.indcrop.2015.06.006
• 8.Lenz, J., Pospiech, D. Paven M., Albach, R., Voit, B., 2020. Influence of the catalyst concentration on the chemical structure, the physical properties and the fire behavior of rigid polyisocyanurate foams, Polymer Degradation and Stability, 177, 109168, DOI: https://doi.org/10.1016/j.polymdegradstab.2020.109168
• 9. Lis A., Lis P., 2018. Ograniczanie zużycia energii do ogrzewania budynków mieszkalnych, Construction of Optimized Energy Potential, 1, 43-50, DOI: https://doi.org/10.17512/bozpe.2018.1.06
• 10.Macaveckas, T., Bliūdžius R., Burlingis, A., 2021. Determination of the impact of environmental temperature on the thermal conductivity of polyisocyanurate (PIR) foam products, Journal of Building Engineering, 41, 102447, DOI: https://doi.org/10.1016/j.jobe.2021.102447
• 11.Modesti, M., Costantini F., dal Lago, E., Piovesan, F., Roso, M., Boaretti C., Lorenzetti, A., 2018. Valuable secondary raw material by chemical recycling of polyisocyanurate foams, Polymer Degradation and Stability, 156, 151-160, DOI: https://doi.org/10.1016/j.polymdegradstab.2018.08.011
• 12.Modesti, M., Lorenzetti, A., 2003. Improvement on fire behaviour of water blown PIR-PUR foams: use of an halogen-free flame retardant, European Polymer Journal, vol. 39, iss. 2, 263-268, DOI: https://doi.org/10.1016/S0014-3057(02)00198-2
• 13.Podwysocka Z., 2013. Budowa domów styropianowych. Dachy i stropy z kształtek styropianowych, Online: https://muratordom.pl/budowa/innetechnologiebudowlane/Budowa-domow-styropianowych-stropy-z-ksztaltek-styropianowych-aabzJA-RCR6-3wAW.html
• 14.PU Europe, 2011. Durability of polyurethane insulation products, [Online]. Available: https://www.pueurope.eu/fileadmin/documents/Factsheets_public/Factsheet_16 _Durability_of_polyurethane_insulation_products__Rev2011_.pdf
• 15.Rosak-Szyrocka, J., Janik, C., 2017. The quality aspect of management in the construction sector, Quality Production Improvement, 1(6), 142-151, DOI: 10.30657/qpi.2017.06.14
• 16.Sipur, 2021. Technical information of the Polish Association of Producers and Processors of Polyurethane Insulations PUR i PIR „SIPUR”. https://sipur.pl/
• 17.Siwiec D., Pacana A., 2021.Sposób podnoszenia poziomu jakości wyrobów, Archiwum Inżynierii Produkcji, 21(1), 1-7, DOI:https://doi.org/10.30657/pea.2021.27.110.30657/groszek.2021.27.1
• 18.Siwiec D., Pacana A., 2021.Sposób podnoszenia poziomu jakości wyrobów, Archiwum Inżynierii Produkcji, 21(1), 1-7, DOI:https://doi.org/10.30657/pea.2021.27.110.30657/groszek.2021.27.1
• 19.Szafranko, E., 2020.Metodyka oceny opłacalności prostych inwestycji energooszczędnych, Budowa zoptymalizowanego potencjału energetycznego, 2, 103-111, DOI:https://doi.org/10.17512/bozpe.2020.2.1310.17512/bozpe.2020.2.13
• 20.Materiały termoizolacyjne ze sztywnej pianki poliuretanowej (PUR/PIR): Właściwości i Wytwarzanie, 2006. Federacja Europejskich Stowarzyszeń Sztywnej Piany Poliuretanowej. [Online]. Dostępny:http://highperformanceinsulation.eu/wpcontent/uploads/2016/08/Thermal_insulation_materials_made_of_rigid_polyurethane_foam.pdf

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).