Inkjet-printed flexible RFID antenna for UHF RFID transponders

• Autorzy: Tomaszewski G. , Jankowski-Mihułowicz P. , Węglarski M. , Lichoń W.

Identyfikatory

DOI

10.1515/msp-2016-0097

• Języki publikacji: EN

Abstrakty

EN

The results of technological investigations in the scope of inkjet-printed flexible RFID antennas dedicated to UHF transponders and also problems with the application of nanomaterials are reported in this paper. The design of the antenna electrical circuit and the parameters of the inkjet printing process were elaborated on the basis of the numerical model prepared in the Mentor Graphics HyperLynx 3D EM software. The project evaluation was performed by measuring electrical parameters of the structures printed with silver-based conductive inks. The obtained results confirm coincidence between the model and its implementation in the inkjet printing technology. Finally, the prepared antenna has been applied in an RFID transponder of UHF band and the functional tests are also reported in this paper.

Słowa kluczowe

EN

flexible antenna; inkjet printing; RFID transponder; printed electronics

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2016
• Tom: Vol. 34, No. 4
• Strony: 760--769
• Opis fizyczny: Bibliogr. 15 poz., rys., tab.

Twórcy

autor

Tomaszewski G.

• Rzeszow University of Technology, Dept. of Electronic and Communications Systems, al. Powstanców Warszawy 12, 35-959 Rzeszów, Poland

autor

Jankowski-Mihułowicz P.

• Rzeszow University of Technology, Dept. of Electronic and Communications Systems, al. Powstanców Warszawy 12, 35-959 Rzeszów, Poland

autor

Węglarski M.

• Rzeszow University of Technology, Dept. of Electronic and Communications Systems, al. Powstanców Warszawy 12, 35-959 Rzeszów, Poland

autor

Lichoń W.

• Rzeszow University of Technology, Dept. of Electronic and Communications Systems, al. Powstanców Warszawy 12, 35-959 Rzeszów, Poland

Bibliografia

• [1] FELBA J., SCHAEFER H., Materials and Technology for Conductive Microstructures, in: MORRIS J.E. (Ed.), Nanopackaging: Nanotechnologies and Electronics Packaging, Springer, Boston, 2008, p. 239.
• [2] SHEN W., ZHANG X., HUANG Q., XU Q., SONG W., Nanoscale, 6 (3) (2014), 1622.
• [3] JAKUBOWSKA M., Techniki drukarskie w elektronice. Materiały i technologie (Printing Techniques in Electronics. Materials and Technologies), Oficyna Wydawnicza Politechniki Warszawskiej, Warszawa, 2013.
• [4] TARAPATA G., PACZESNY D., KAWECKI K., SPIE, 8903 (89032I) (2013), 1.
• [5] JANKOWSKI-MIHUŁOWICZ P., TOMASZEWSKI G., WĘGLARSKI M., Przegląd Elektrotechniczny, 4 (2015), 1.
• [6] ORTEGO I., SANCHEZ N., GARCIA J., CASADO F., VALDERAS D., SANCHO J.I., Int. J. Antenn. Propag., 2012 (2012), 1.
• [7] KOSKI K., KOSKI E., VIRTANEN J., BJÖRNINEN T., SYDÄNHEIMO L., UKKONEN L., ELSHERBENI A., Int. J. Adv. Manuf. Tech., 62 (2012), 167.
• [8] LIM Y.Y., GOH Y.M., LIU C., Ind. Eng. Chem. Res., 52 (2013), 11564.
• [9] DERBY B., J. Eur. Ceram. Soc., 31 (2011), 2543.
• [10] TOMASZEWSKI G., POTENCKI J., WAŁACH T., PILECKI M., Elektronika, 3 (2015), 25.
• [11] GROSINGER J., SCHOLTZ OVE A., E&I, 128 (11 – 12) (2011), 408.
• [12] JANKOWSKI-MIHUŁOWICZ P., WĘGLARSKI M., Electron. Electr. Eng., 20 (9) (2014), 65.
• [13] JANKOWSKI-MIHUŁOWICZ P., LICHOŃ W., PITERA G., WĘGLARSKI M., Elektronika, 1 (2014), 41.
• [14] YIN Z., HUANG Y., BU N., WANG X., XIONG Y., Chinese Sci. Bull., 55 (2010), 3383.
• [15] JANKOWSKI-MIHUŁOWICZ P., PITERA G., WĘGLARSKI M., Metrol. Meas. Syst., 3 (2014), 509.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).