Research on the Microstructure of Laser Beam Welded Sc-Modified AA2519-F Extrusion

• Autorzy: Kosturek Robert , Śnieżek Lucjan , Grzelak Krzysztof , Wachowski Marcin

Identyfikatory

DOI

10.24425/amm.2022.137817

• Języki publikacji: EN

Abstrakty

EN

In this paper, the microstructure of laser beam welded Sc-modified AA2519-F has been taken under investigation. The welded joint has been produced using Fanuc 710i industrial robot equipped with YLS-6000 6 kW laser beam source. The welding speed and laser power were equal to 0.75 m/min and 3.2 kW, respectively. The investigation involved microstructure observations with the use of both light microscope and scanning electron microscope with energy dispersive spectroscopy (EDS) analysis of chemical composition and microhardness distribution measurements. It has been stated that laser beam welding allows to obtain Sc-modified AA2519-F weld of good quality, characterized by the presence of an equiaxed grain zone containing scandium-rich precipitates adjacent to the fusion boundary.

Słowa kluczowe

EN

aluminum; extrusion; AA2519; microstructure; laser beam welding

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2022
• Tom: Vol. 67, iss. 2
• Strony: 773--778
• Opis fizyczny: Bibliogr. 25 poz., fot., rys., tab.

Twórcy

autor

Kosturek Robert

• Military University of Technology, Faculty of Mechanical Engineering, 2 gen. S. Kaliskiego Str., 00-908 Warszawa, Poland

• https://orcid.org/0000-0002-6663-0529

autor

Śnieżek Lucjan

• Military University of Technology, Faculty of Mechanical Engineering, 2 gen. S. Kaliskiego Str., 00-908 Warszawa, Poland

• https://orcid.org/0000-0002-1157-0565

autor

Grzelak Krzysztof

• Military University of Technology, Faculty of Mechanical Engineering, 2 gen. S. Kaliskiego Str., 00-908 Warszawa, Poland

• https://orcid.org/0000-0003-0675-1983

autor

Wachowski Marcin

• Military University of Technology, Faculty of Mechanical Engineering, 2 gen. S. Kaliskiego Str., 00-908 Warszawa, Poland

• https://orcid.org/0000-0002-6732-5972

Bibliografia

• [1] V. Hutsaylyuk, M. Student, V. Dovhunyk, V. Posuvailo, O. Student, P. Maruschak, I. Koval’chuck, Metals 9, 280 (2019). DOI: https://doi.org/110.3390/met9030280
• [2] R. Kosturek, M. Wachowski, L. Śnieżek, A. Kruk, J. Torzewski, K. Grzelak, J. Mierzyński, Materiali in Tehnologije 53, 109-113 (2019). DOI: https://doi.org/110.17222/mit.2018.153
• [3] A. Guzanová, J. Brezinová, D. Draganovská, P.O. Maruschak, Koroze a Ochrana Materialu 63, 86-93 (2019).
• [4] R. Kosturek, M. Wachowski, L. Śnieżek, M. Gloc, Metals 9, 1-16 (2019). DOI: https://doi.org/110.3390/met9020246
• [5] R. Kosturek, M. Najwer, P. Niesłony, M. Wachowski, Lecture Notes in Mechanical Engineering 201519, 681-686 (2018). DOI: https://doi.org/110.1007/978-3-319-68619-6_65
• [6] M. Wachowski, R. Kosturek, L. Śnieżek, S. Mróz, M. Gloc, A. Krawczyńska, M. Małek, Materiali in Tehnologije 53, 239-243 (2019). DOI: https://doi.org/110.17222/mit.2018.151
• [7] C. Chen, M. Gao, H. Mu, X. Zeng, J. Laser Appl. 31, 032005 (2019). DOI: https://doi.org/110.2351/1.5094804
• [8] V. Hutsaylyuk, M. Student, V. Posuvailo, O. Student, Y. Sirak, V. Hvozdets’kyi, P. Maruschak, H. Veselivska, Vaccum 179, 109514 (2020).
• [9] R. Kosturek, L. Śnieżek, J. Torzewski, M. Wachowski, Metals 9, 1-15 (2019). DOI: https://doi.org/110.3390/met9101024
• [10] R. Kosturek, L. Śnieżek, J. Torzewski, M. Wachowski, Manufacturing Review 7, 28 (2020). DOI: https://doi.org/110.1051/mfreview/2020025
• [11] B. Płonka, M. Rajda, Z. Zamkotowicz, J. Zelechowski, K. Remsak, P. Korczak, W. Szymański, L. Śnieżek, Arch. Metal.l Mater. 61, 381-388 (2016). DOI: https://doi.org/110.1515/amm-2016-0070
• [12] Y. Liu, C. Zhang, X. Zhang, Y. Huang, Intermetallics 123, 106823 (2020). DOI: https://doi.org/110.1016/j.intermet.2020.106823
• [13] A. Smolej, B. Markoli, A. Nagode, D. Klobčar, RMZ-Materials and Geoenvironment 62, 73-80 (2015).
• [14] R. Guan, D. Tie, Acta Metallurgica Sinica (English Letters) 30 (2017). DOI: https://doi.org/110.1007/s40195-017-0565-8
• [15] Z. Silvayeh, R. Vallant, C. Sommitsch et al., Metall. Mater. Trans. A 48, 5376-5386 (2017). DOI: https://doi.org/110.1007/s11661-017-4277-5
• [16] A.F. Norman, S.S. Birley, P.B. Prangnell, Sci. Technol. Weld. Joi. 8, 235-245 (2003). DOI: https://doi.org/110.1179/136217103225010989
• [17] J. Viňáš, J. Brezinová, J. Brezina, P.O. Maruschak, Mater. Sci. 55, 46-51 (2019). DOI: https://doi.org/110.1007/s11003-019-00250-x
• [18] G. Rogalski, A. Świerczyńska, M. Landowski, D. Fydrych, Metals 10, 559 (2020).
• [19] J. Winczek, J. Iwaszko, M. Matuszewski, IOP Conference Series: Materials Science And Engineering 776, 012056 (2020). DOI: https://doi.org/110.1088/1757-899X/776/1/012056
• [20] J. Górka, M. Przybyła, M. Szmul, A. Chudzio, D. Ładak, Adv. Mater. Res.-Switz. 19, 55-64 (2019). DOI: https://doi.org/110.2478/adms-2019-0017
• [21] G. Rogalski, A. Swierczynska, D. Fydrych, M. Landowski, Welding Technology Review 91 (2019). DOI: https://doi.org/110.26628/wtr.v91i4.1017
• [22] D. Rozumek, J. Lewandowski, G. Lesiuk, J. Correia, Int. J. of Fatigue 131, 105328 (2020). DOI: https://doi.org/110.1016/j.ijfatigue.2019.105328
• [23] N. Kashaev, V. Ventzke, G. Çam, J. Manuf. Process 36, 571-600 (2018). DOI: https://doi.org/110.1016/j.jmapro.2018.10.005
• [24] C. Yeni, S. Sami, M. Pakdil, Kovove Materialy 47, 341-347 (2009).
• [25] D.C. Lin, G. Wang, T. Srivatsan, Materials Science and Engineering: A 351, 304-309 (2003). DOI: https://doi.org/110.1016/s0921-5093(02)00858-4

Uwagi

1. This research was funded by Polish Ministry of National Defence, grant number: PBG/13-998.

2. Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).