PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Microstructural and Mechanical Study of Inconel 625 - Tungsten Carbide Composite Coatings Obtained by Powder Laser Cladding

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
This study focuses on the investigation of fine (~0.54 μm) tungsten carbide particles effect on structural and mechanical properties of laser cladded Inconel 625-WC composite. Three powder mixtures with different Inconel 625 – WC weight ratio (10, 20 and 30 weight % of WC) were prepared. Coatings were made using following process parameters: laser beam diameter ø ≈ 500 μm, powder feeder rotation speed – 7 m/min, scanning velocity – 10 m/min, laser power – 220 W changed to 320 W, distance between tracks – 1 mm changed to 0.8 mm. Microstructure and hardness were investigated. Coatings produced by laser cladding were crack and pore free, chemically and structurally homogenous. High cooling rate during cladding process resulted in fine microstructure of material. Hardness improved with addition of WC from 396.3 ±10.5 HV for pure Inconel 625, to 469.9 ±24.9 HV for 30 weight % of WC. Tungsten carbide dissolved in Inconel 625 which allowed formation of intergranular eutectic that contains TCP phases.
Twórcy
autor
  • AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Krakow, Poland
autor
  • AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Krakow, Poland
autor
  • AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Krakow, Poland
autor
  • AGH University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science, Krakow, Poland
Bibliografia
  • [1] S. S. Sandhu, A. S. Shahi, Journal of Materials Processing Technology 233, 1-8 (2016).
  • [2] P. Ganesh, R. Kaul, C. P. Paul, P. Tiwari, S. K. Rai, R. C. Prasad, L.M. Kukreja, Materials Science and Engineering A 527, 7490-7497 (2010).
  • [3] S. Zhou, Y. Huang, X. Zeng, Q. Hu, Materials Science and Engineering A 480, 564-572 (2008).
  • [4] S. Zhou, Y. Huang, X. Zeng, Applied Surface Science 254, 3110-3119 (2008).
  • [5] F. Xu, Y. Lv, Y. Liu, F. Shu, P. He, B. Xu, Journal of Material Science and Technology 29 (5), 480-488, (2013).
  • [6] G. P. Dinda, A. K. Dasgupta, J. Mazumder, Materials Science and Engineering A 509 (1-2), 98-104 (2009).
  • [7] J. Kusiński, M. Blicharski, Ł. Cieniek, S. Dymek, M. Rozmus-Górnikowska, Inżynieria Materiałowa XXXVI (6), 363-367 (2015).
  • [8] M. Rombouts, G. Maes, M. Mertens, Journal of Laser Applications 24 (5) (2012).
  • [9] S. Zhou, X. Dai, X. Zeng, Applied Surface Science 255 (20), 8494-8500 (2009).
  • [10] J. N. DuPont, Metallurgical and Materials Transactions Archives A 27, 2612-3620 (1996).
  • [11] T. E. Abioye, J. Folkes, A. T. Clare, D.G. McCartney, Journal of Surface Engineering 29 (9), 647-653 (2013).
  • [12] S. Zhou, Y. Huang, X. Zeng, Q. Hu, Materials Science and Engineering A 480, 564-572 (2008).
  • [13] K. Matsuura, T. Koyanagi, T. Ohmi, M. Kudoh, Materials Transactions 44 (5), 861-865 (2003).
  • [14] T.I. Khan, S.A. Rizvi, K. Matsuura, Wear 244, 154-164 (2000)
  • [15] N. Mizuta, K. Matsuura, S. Kirihara, Y. Miyamoto, Materials Science and Engineering A 492, 199-204 (2008).
  • [16] T. E. Abioye, A. T. Clare, D. G. McCartney, Journal of Materials Processing Technology 217, 232-240 (2015).
  • [17] M. Donachie, J. Donachie, Superalloys. A Technical Guide, ASM International, USA, 2-22 (2002).
  • [18] T. Sims, N.S. Stoloff, W.C. Hagel, Superalloys II: High-temperature materials for aerospace and industrial power, Wiley (1987).
  • [19] C. Leyens, E. Beyer, J. Lawrence (Ed.) Laser Surface Engineering Processes and Applications: Chaper 8 Innovations in laser cladding and direct laser metal deposition, Woodhead Publishing Series in Electronic and Optical Materials 65, 181-191 (2015).
  • [20] L. Costa, R. Vilar, Rapid Prototyping Journal 15 (4), 264-279 (2009).
  • [21] R. A. Ganeev, Laser-Surface Interactions, Springer Netherlands (2014).
  • [22] A. J. Antończak, Wybrane Zagadnienia z Laserowej Modyfikacji Materiałów, Oficyna Wydawnicza Politechniki Wrocławskiej, Wrocław (2014).
  • [23] J. Kusiński, Lasery i ich zastosowanie w Inżynierii Materiałowej, Wydawnictwo Naukowe Akapit (2000).
  • [24] Inconel 625 Specification [cited 20 June 2016]: http://www.alloywire.com/inconel_alloy_625.html
  • [25] Inconel 625 properties specification [cited 20 June 2016]: http://www.hightempmetals.com/techdata/hitempInconel625data.php
Uwagi
PL
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-261754f3-0e61-4f61-9e33-8e2b38e4559a
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.