PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Optimization of Output Responses during EDM of AZ91 Magnesium Alloy using Grey Relational Analysis and TOPSIS

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Unconventional machining of magnesium alloys through die sinking and Wire Electrical Discharge Machining (WEDM) processes are preferred over conventional machining processes to overcome the rapid loss in strength and affinity that occurs with tool materials at high temperatures. in the present study, AZ91 magnesium alloy is machined in EDM using a prepared alloy tool (copper alloyed with titanium diboride). Based on Taguchi’s L27 orthogonal array, a total of 27 experiments have been conducted by varying the process parameters such as pulse on time (Ton), gap voltage (Vg) and current (Ip) with three different levels. Techniques for Order Preference by Similarity to Ideal Solution (TOPSIS) and Grey Relational Analysis (GRA) have been applied to optimize the response parameters of EDM to obtain maximum Material Removal Rate (MRR) and minimum Tool Wear Rate (TWR) and Surface Roughness (SR). Analysis of variance (ANOVA) is carried out based on F-test at a confidence interval of 95% to confirm the significant influence of individual parameters. From the above two optimization techniques, the obtained optimal values are current 15 A, gap voltage 55 V, pulse on time 30 μs and an error of less than 5% is observed from the confirmation experiments. Scanning Electron Microscope (SEM) images revealed that there is no formation of cracks but micro pits and holes are observed.
Słowa kluczowe
Twórcy
autor
  • Bannari Amman Institute of Technology, Department of Mechanical Engineering, Sathyamangalam, Erode-638401, Tamil Nadu, India
  • Bannari Amman Institute of Technology, Department of Mechanical Engineering, Sathyamangalam, Erode-638401, Tamil Nadu, India
Bibliografia
  • [1] U. Riaz, I. Shabib, W. Haider, J. Biomed. Mater. Res. Part B. 107 (6), 1970-1996 (2019). DOI: https://doi.org/10.1002/jbm.b.34290
  • [2] M.K. Kulekci, Int. J. Adv. Manuf. Technol. 39 (9-10), 851-865 (2008). DOI: https://doi.org/10.1007/s00170-007-1279-2
  • [3] H. Furuya, N. Kogiso, S. Matunaga, K. Senda, Mater. Sci. Forum. 350, 341-348 (2000). DOI: https://doi.org/10.4028/www.scientific.net/MSF.350-351.341
  • [4] S.N. Mathaudhu, E.A. Nyberg, Magnesium Alloys in U.S. Military Applications: Past, Current and Future Solutions. in: S.N. Mathaudhu, A.A. Luo, N.R. Neelameggham, E.A. Nyberg, W.H. Sillekens (eds) Essential Readings in Magnesium Technology. Springer, Cham (2016). DOI: https://doi.org/10.1007/978-3-319-48099-2_10
  • [5] V.V. Ramalingam, P. Ramasamy, M. das Kovukkal, G. Myilsamy, Met. Mater. Int. 26 (4), 409-430 (2020). DOI: https://doi.org/10.1007/s12540-019-00346-8
  • [6] K.H. Ho, S.T. Newman, Int. J. Mach. Tools Manuf. 43 (13), 1287-1300 (2003). DOI: https://doi.org/10.1016/S0890-6955(03)00162-7
  • [7] M. Hourmand, A.A.D. Sarhan, M. Sayuti, Int. J. Adv. Manuf. Technol. 91 (1-4), 1023-1056, (2017). DOI: https://doi.org/10.1007/s00170-016-9671-4
  • [8] B. Nahak, A. Gupta, Manuf. Rev. 6 (2), 2019. DOI: https://doi.org/10.1051/mfreview/2018015
  • [9] S.S. Sidhu, A. Batish, S. Kumar, J. Reinf. Plast. Compos. 32 (17), 1310-1320 (2013). DOI: https://doi.org/10.1177/0731684413489366
  • [10] L. Arunkumar, B.K. Raghunath, Int. J. Eng. Technol. 5 (5), 4332-4338 (2013).
  • [11] Sohil Parsana, Nishil Radadia, Mohak Sheth, Nisarg Sheth, Vimal Savsani, N. Eswara Prasad, T. Ramprabhu, Arch. Civ. Mech. Eng. 18 (3), 799-817 (2018). DOI: https://doi.org/10.1016/j.acme.2017.12.007
  • [12] S. Santosh, S. Javed Syed Ibrahim, P. Saravanamuthukumar, K. Rajkumar, K.L. Hari Krishna, Appl. Mech. Mater. 787, 406-410 (2015). DOI: https://doi.org/10.4028/www.scientific.net/AMM.787.406
  • [13] M. Hourmand, A.A.D. Sarhan, S. Farahany, M. Sayuti, Int. J. Adv. Manuf. Technol. 101 (9-12), 2723-2737 (2019). DOI: https://doi.org/10.1007/s00170-018-3130-3
  • [14] R. Ranjith, P. Tamilselvam, T. Prakash, C. Chinnasamy, Mater. Manuf. Process. 34 (10), 1120-1128 (2019). DOI: https://doi.org/10.1080/10426914.2019.1628258
  • [15] S. Tripathy, D.K. Tripathy, Mach. Sci. Technol. 21 (3), 362-384 (2017). DOI: https://doi.org/10.1080/10910344.2017.1283957
  • [16] S. Suresh Kumar, M. Uthayakumar, S. Thirumalai Kumaran, P. Parameswaran, E. Mohandas, G. Kempulraj, B.S. Ramesh Babu, S.A. Natarajan, J. Manuf. Process. 20, 33-39 (2015). DOI: https://doi.org/10.1016/j.jmapro.2015.09.011
  • [17] P. Senthil, S. Vinodh, A.K. Singh, Int. J. Mach. Mach. Mater. 16 (1) 80-94 (2014). DOI: https://doi.org/10.1504/ijMMM.2014.063922
  • [18] K. Shunmugesh, K. Panneerselvam, Arch. Metall. Mater. 62 (3), 1803-1812 (2017). DOI: https://doi.org/10.1515/amm-2017-0273
  • [19] S.K. Ramuvel, S. Paramasivam, J. Mater. Res. Technol. 9 (3), 3885-3896 (2020). DOI: https://doi.org/10.1016/j.jmrt.2020.02.015
  • [20] A.K. Sahu, S.S. Mahapatra, S. Chatterjee, J. Thomas, Mater. Today:. Proc. 5 (9), 19019-19026 (2018). DOI: https://doi.org/10.1016/j.matpr.2018.06.253
  • [21] M. Eswara Krishna, P.K. Patowari, Mater. Manuf. Processes. 29 (9), 1131-1138 (2014). DOI: https://doi.org/10.1080/10426914.2014.930887
  • [22] A.S. Gill, S. Kumar, Arabian J. Sci. Eng. 43 (3), 1499-1510 (2017). DOI: https://doi.org/10.1007/s13369-017-2960-x
  • [23] P.K. Rout, B. Surekha, P.C. Jena, G.N. Arko, Mater. Today: Proc. 26 (2), 2379-2387 (2020). DOI: https://doi.org/10.1016/j.matpr.2020.02.510
  • [24] M. Gostimirovic, P. Kovac, M. Sekulic, B. Skoric, J. Mech. Sci. Technol. 26 (1), 173-179 (2012). DOI: https://doi.org/10.1007/s12206-011-0922-x
  • [25] M. Ghoreishi, C. Tabari, Mater. Manuf. Processes, 22 (7-8), 833-841 (2007). DOI: https://doi.org/10.1080/10426910701446812
  • [26] M. Kiyak, B.E. Aldemir, E. Altan, Int. J. Adv. Manuf. Technol. 79 (1-4), 513-518 (2015). DOI: https://doi.org/10.1007/s00170-015-6840-9
  • [27] B.M. Schumacher, J. Mater. Process. Technol. 149 (1-3), 376-381 (2004). DOI: https://doi.org/10.1016/j.jmatprotec.2003.11.060
  • [28] l. Srinivasan, K. Mohammad Chand, T. Deepan Bharathi Kannan, P. Sathiya, S. Biju, Trans. Indian Inst. Met. 71 (2), 373-382 (2018). DOI: https://doi.org/10.1007/s12666-017-1166-y
  • [29] S. Tripathy, D.K. Tripathy, Eng. Sci. Technol. Int. J. 19 (1), 62-70 (2016). DOI: https://doi.org/10.1016/j.jestch.2015.07.010
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-253e9095-5fca-4640-af7e-4249bb90f027
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.