Environmental Loads Resulting from Manufacturing Technology

• Autorzy: Gabryelewicz Izabela , Lenort Radim , Wędrychowicz Maciej , Krupa Patryk , Woźniak Waldemar

Identyfikatory

DOI

10.54740/ros.2021.043

• Języki publikacji: EN

Abstrakty

EN

The study of environmental loads resulting from manufacturing technology is of great importance for environmental protection. Applying the principles of sustainable development means "a way of farming in which meeting the needs of the present generation will not reduce the chances of meeting the needs of future generations." Faced with such a challenge, the product must be assessed throughout its entire life cycle (LCA). From the available technologies and materials, one should choose those that are least harmful to the environment. In order to make a correct choice, it is necessary to know and understand the technological processes and phenomena that take place in them. Using off-theshelf LCA applications, without knowing basic knowledge of manufacturing technology, can bias the results. The aim of the article is to present benefits resulting from the environmental assessment of manufacturing processes.

Słowa kluczowe

EN

Fe-C alloys; technological process; environmental assessment

• Wydawca: Politechnika Koszalińska
• Czasopismo: Rocznik Ochrona Środowiska
• Rocznik: 2021
• Tom: Tom 23
• Strony: 613--628
• Opis fizyczny: Bibliogr. 45 poz., rys., tab.

Twórcy

autor

Gabryelewicz Izabela

• Department of Metallurgy and Materials Engineering, Institute of Materials and Biomedical Engineering, Faculty of Mechanical Engineering, University of Zielona Góra, Poland

• https://orcid.org/0000-0002-0691-4108

autor

Lenort Radim

• Department of Economics and Management in Industry, Faculty of Materials Science and Technology, VSB – Technical University of Ostrava, Czech Republic

• https://orcid.org/0000-0001-6194-5364

autor

Wędrychowicz Maciej

• Department of Metallurgy and Materials Engineering, Institute of Materials and Biomedical Engineering, Faculty of Mechanical Engineering, University of Zielona Góra, Poland

• https://orcid.org/0000-0002-6203-229X

autor

Krupa Patryk

• Department of Metallurgy and Materials Engineering, Institute of Materials and Biomedical Engineering, Faculty of Mechanical Engineering, University of Zielona Góra, Poland

• https://orcid.org/0000-0002-8388-0175

autor

Woźniak Waldemar

• Department of Production and Transport Engineering, Institute of Materials and Biomedical Engineering, Faculty of Mechanical Engineering, University of Zielona Góra, Poland

• https://orcid.org/0000-0002-4703-6823

Bibliografia

• Adamczyk, W. (2004). Ekologia wyrobów. PWE, Warszawa
• Ashby, M.F. (1998). Dobór materiałów w projektowaniu inżynierskim. WNT, Warszawa (in Polish).
• Best Available Techniques (BAT) Reference Document for the Ferrous Metals Processing Industry 2010, Industrial Emissions Directive 2010/75/EU (Integrated Pollution Prevention And Control)
• Best Available Techniques (BAT) Reference Document for the Ferrous Metals Processing Industry 2019.
• Best Available Techniques (BAT) Reference Document for the Smitheries and Foundries Industry 2004.
• Best Available Techniques (BAT) Reference Document for the Smitheries and Foundries Industry 2005.
• Best Available Techniques Reference Document on the Production of Iron and Steel 2001.
• Burakowski, T., Sala, A. (1980). Racjonalizacja zużycia energii w obróbce cieplnej metali. Publishing House of the Institute of Precision Mechanics (in Polish).
• Burchart-Korol, D., Jursova, S., Folega, P., Pustejovska, P. (2020). Life Cycle Impact Assessment of Electric Vehicle Battery Charging in European Union Countries. Journal of Cleaner Production, 257, (120476), DOI: 10.1016/j.jclepro.2020.120476.
• Chamier-Gliszczynski, N., Krzyzynski, T. (2005). On modelling three-stage system of receipt and automotive recycling. REWAS’04, Global Symposium on Recycling, Waste Treatment and Clean Technology 2005, 2813-2814, Madrid, Spain, 26-29 September 2004, Conference Paper, ISBN: 8495520060.
• Chamier-Gliszczyński, N. (2010). Optimal Design for the Environment of the Means Transportation: a Case Study of Reuse and Recycling Materials. Sold State Phenomena, 165, 244-249. DOI: 10.4028/www.scientific.net/SSP.165.244
• Chamier-Gliszczyński, N. (2011). Environmental aspects of maintenance of transport means, end-of life stage of transport means. Eksploatacja i Niezawodność – Maintenance mand Reliability, 50(2), 59-71. http://ein.org.pl/podstrony/wydania/50/pdf/07.pdf
• Chamier-Gliszczyński, N. (2011a). Reuse, Recovery and Recycling System of End-of Life Vehicles. Key Engineering Materials, 450, 425-428. DOI: 10.4028/www.scientific.net/KEM.450.425
• Chamier-Gliszczyński, N. (2011b). Recycling Aspect of End-of Life Vehicles. Recovery of Components and Materials from ELVs. Key Engineering Materials, 450, 421-424. DOI: 10.4028/www.scientific.net/KEM.450.421
• Clift, R. (1997). Life cycle assessment. University of Surrey.
• Crum, L., W. (1973). Analiza wartości. PWE, Warszawa (in Polish).
• Czwajda, L., Kosacka-Olejnik, M., Kudelska, I., Kostrzewski, M., Sethanan, K., Pitakaso, R. (2019). Application of prediction markets phenomenon as decision support instrument in vehicle recycling sector. Logforum, 15(2), 265-278. DOI: 10.17270/J.LOG.2019.329
• Ekvall, T., Tillman, A.M., Molander, S. (2005). Normative Moral Philosophy and Methodology for Life Cycle Assessment. Journal of Cleaner Production, 13.
• Filipiak, M., Jajczyk, J., Dobrzycki, A. (2018). The economics of use of wireless power supply in electric buses, ITM Web of Conferences, 19(01034), DOI: https://doi.org/10.1051/itmconf/20181901034.
• Gabryelewicz, I., Stryjski, R., Wędrychowicz, M., Dąbrowski, T. (2020). The State Of The Air Quality In Poland, Rocznik Ochrona Środowiska, 22(2), 998-1013.
• Gabryelewicz, I., Wędrychowicz, M., Pántya, P., Krupa, P. (2021). Raw material and environmental safety of industrial processes 2021, W: I. Gabryelewicz, M. Wędrychowicz (red.). Environmental safety – non-energy and raw materials: scientific monograph (11-37). Zielona Góra: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego (in Polish).
• Guinee, J.B. (2002) Handbook on Life Cycle Assessmennt: Operational Guide to the ISO Standard. Part 1,2,3. Kluwer Academic Publishers, Dordrecht Boston London.
• Hochschorner, E., Finnveden, G. (2003). Evaluation of Two Simplified Life Cycle Assessment Methods. The Interactional Journal of Life cycle Assessment, 8(3).
• Jajczyk, J. (2016). Use of Personal Computers with Multi-core Processors for Optimisation Using the Genetic Algorithm Method, IEEEXplore Electronic, DOI: https://doi.org/10.1109/CPEE.2016.7738731.
• Jajczyk, J., Filipiak, M., Dąbrowski, T. (2020). Reducing the Use of Electrochemical Sources of Electricity Through the Use of Wireless Power Supply. Rocznik Ochrona Środowiska, 22(1), 444-455. http://ros.edu.pl/images/roczniki/2020/033_ROS_V22_R2020.pdf
• Loucanova, E., Olsiakova, M. (2020). Logistics, Eco-innovations and Pandemic. Acta logistica, 7(3), 187-193, DOI: 10.22306/al.v7i3.175.
• Meadows, D.H., Meadows, D.L., Randers, J., Behrens, W.W. (1973) Granice wzrostu. PWE, Warszawa (in Polish).
• Nielsen, A.M., Weidema, B.P. (2001). Input/Output analysis – Shortcuts to Life Cycle Data. LCA Consultants, Environmental Project No. 581, Copenhagen.
• Obwieszczenie Ministra Klimatu z dnia 9 września 2020 r. w sprawie wysokości stawek opłat za korzystanie ze środowiska na rok 2021
• Obwieszczenie Ministra Środowiska z dnia 18 sierpnia 2009 r. w sprawie wysokości stawek opłat za korzystanie ze środowiska na rok 2010
• Obwieszczenie Ministra Środowiska z dnia 3 października 2018 r. w sprawie wysokości stawek opłat za korzystanie ze środowiska na rok 2019
• Pieńkowski, G., Krzyżanowski, J. (2005). Mączka J., Problemy oceny energochłonności wyrobów wytwarzanych metodami obróbki ubytkowej. Przegląd Mechaniczny 2005, nr 11 (in Polish).
• Rozporządzenie Ministra Środowiska z dnia 26 lipca 2002 r. w sprawie rodzajów instalacji mogących powodować znaczne zanieczyszczenie poszczególnych elementów przyrodniczych albo środowiska jako całości. (Dz. U. z dnia 1.08.2002) (in Polish).
• Sabadka, D., Molnár, V., Fedorko, G., Jachowicz, T. (2017) Optimization of production processes using the yamazumi method. Advances in Science and Technology Research Journal, 11(4), 175-182.
• Sala, A. (1996). Koncepcja systemu normatywów energochłonności. Normalizacja 9/1996.
• Sala, A. (1986) Zasady energooszczędnego konstruowania. Część I., Zastosowanie rachunku energochłonności skumulowanej oraz wybór właściwej strefy nakładów energetycznych. Przegląd Mechaniczny 12/1986 (in Polish).
• Sala, A., (1986) Zasady energooszczędnego konstruowania. Część II. Minimalizacja energochłonności produkcji i eksploatacji, przykłady jej obniżania oraz zalecenia postępowania., Przegląd Mechaniczny 13/1986 (in Polish).
• Schulz, H., Schiefer, E. (1986). Optimierung von Prozessen, Prozebfuhrung und Energiebedarf bei spanenden Fertigungsverfahren.
• Sheng, P., Munoz, AA., (1995). An analytical approach for determining the environmental impact of machining processes. Journal of Materials Processing Technology, 53.
• Srinivasan, M., Sheng, P. (1999). Feature-based process planning for environmentally conscious machining – Part 2; macroplanning. Robotics and Computer Integrated Manufacturing, 15.
• Srinivasan, M., Sheng, P. (1999). Feature-based process planning for environmentally conscious machining – Part 1: microplanning. Robotics and Computer Integrated Manufacturing, 15.
• Straka, M., Tausova, M., Rosova, A., Cehlar, M., Kacmary, P., Sisol, M., Ignacz, P., Farkas, C. (2020). Big Data Analytics of a Waste Recycling Simulation Logistics System. Polish Journal of Environmental Studies, 29(3), 2355-2364, DOI: 10.15244/pjoes/108684
• Weidema, B.P. (1993). Envronmental Assessment of Produkt. A textbook on life cycle assessment. UETP-EEE, Helsinki
• Wędrychowicz, M., Bydałek, A., Migas, P., Skrzekut, T., Noga, P., Madej, P., Kałasznikow, A. (2021). The effect of adding iron powder from plasma cutting on the microstructure, mechanical properties of the composite based on aluminum powder matrix made using powder metallurgy. Archives of Metallurgy and Materials 66(1), 273-279.
• Wędrychowicz, M., Bydałek, A., Skrzetut, T., Noga, P., Gabryelewicz, I., Madej, P. (2019). Analysis of the mechanical strength, structure and possibilities of using waste phosphogypsum in aluminum powder composites. SN Applied Sciences, 1.