Modelling of Characteristics of Turning of Shafts with Low Rigidity

• Autorzy: Świć A. , Gola A. , Hajduk M.
• Języki publikacji: EN

Abstrakty

EN

Numerical studies were conducted with the use of a computer program permitting the determination of the basic dynamic characteristics of the process of machining and the presentation of graphic characteristics of the numerical simulations performed. Analysis was performed of the relation of the output parameters of the dynamic system to the input parameters, relative stiffness coefficient B to feed rate and depth of machining, change of retardation and time constants to rotary speed and depth of machining, and of the frequency and time characteristics of models of the dynamic system of machining of shafts with low rigidity.

Słowa kluczowe

EN

turning; shaft with low rigidity; modelling

• Wydawca: Polskie Towarzystwo Promocji Wiedzy ; Lublin University of Technology
• Czasopismo: Applied Computer Science
• Rocznik: 2016
• Tom: Vol. 12, no 3
• Strony: 61--73
• Opis fizyczny: Bibliogr. 10 poz., fig., tab.

Twórcy

autor

Świć A.

• Institute of Technological Systems of Information, Lublin University of Technology, Nadbystrzycka Street 36, 20-618 Lublin, Poland

autor

Gola A.

• Department of Enterprise Organization, Lublin University of Technology, Nadbystrzycka Street 38, 20-618 Lublin, Poland

autor

Hajduk M.

• Technical University of Košice, Department of Production Systems and Robotics, Slovakia

Bibliografia

• 1. Abakumov, A., Taranenko, V., & Zubrzycki, J. (2006). Modeling of characteristics of dynamic system of turning process for axial-symmetric shafts. V-th International Congress “Mechanical Engineering Technologies, 06” (MT’’06) (pp.76-78). Varna, Bulgaria.
• 2. Cardi, A. A., Firpi, H. A., Bement, M. T., & Liang, S. Y. (2008). Workpiece dynamic analysis and prediction during chatter of turning process. Mechanical Systems and Signal Processing, 22(6), 1481-1494. doi:10.1016/j.ymssp.2007.11.026
• 3. Gola, A. (2014). Economic Aspects of Manufacturing Systems Design. Actual Problems of Economics, 156(6), 205-212.
• 4. Ratchev, S., Liu, S., Huang, W., & Becker, A. A. (2004). Milling error prediction and compensation in machining of low-rigidity parts. International Journal of Machine Tools & Manufacture, 44(15), 1629-1641. doi:10.1016/j.ijmachtools.2004.06.001
• 5. Świc, A., & Mazurek, L. (2011). Modeling the reliability and efficiency of flexible synchronous production line. Eksploatacja I Niezawodnosc-Maintenance and Reliability, 4, 41-48.
• 6. Świc, A., & Taranenko, W. (2012). Adaptive control of machining accuracy of axial-symmetrical low-rigidity parts in elastic-deformable state. Eksploatacja I Niezawodnosc-Maintenance and Reliability, 14(3), 215-221.
• 7. Świć, A. (2009). Technologia obróbki wałów o małej sztywności. Lublin: Wydawnictwo Politechniki Lubelskiej.
• 8. Świć, A., Gola, A., & Wołos, D. (2014). A Method for Increasing the Economic Effectiveness of the Low Rigidity Shafts. Actual Problems of Economics, 161(11), 469-477.
• 9. Świć, A., Wołos, D., Zubrzycki, J., Opielak, M., Gola, A., & Taranenko, V. (2014). Accuracy Control in the Machining of Low Rigidity Shafts. Applied Mechanics and Materials, 613, 357-367.
• 10. Wu, D. W., & Liu, C. R. (1985). An analytical model of Cutting dynamics. Part 2. Verification. Journal of Engineering for Industry, 107(2), 112. doi:10.1115/1.3185973

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę