Mechanical systems with air spring flexible elements

• Autorzy: Vinogradov Borys

Identyfikatory

DOI

10.20858/sjsutst.2019.103.16

• Języki publikacji: EN

Abstrakty

EN

The purpose of this study was to assess the effectiveness of flexible air-spring systems operating in parallel to share the total load, taking into account installation and in-operation errors. This study presented experimental and calculated characteristics of the air spring flexibility and its dependence on the polytropic index and additional volume. It considered patterns of load distribution between the air springs when they are operating in parallel to share the total load for the case when the air springs were used as the supporting elements for various machines and units, and between transmission lines containing flexible couplings, where air springs were installed as flexible elements.

Słowa kluczowe

EN

air spring; rubber-cord shells; load distribution; flexible

PL

sprężyna pneumatyczna; człony pneumatyczno-elastyczne; rozkład obciążenia; elastyczny

• Wydawca: Wydawnictwo Politechniki Śląskiej
• Czasopismo: Zeszyty Naukowe. Transport / Politechnika Śląska
• Rocznik: 2019
• Tom: z. 103
• Strony: 199--207
• Opis fizyczny: Bibliogr. 7 poz.

Twórcy

autor

Vinogradov Borys

• Faculty of Mechanical, Ukrainian State University of Chemical Technology, Gagarin 5 Street, 49005, Dnepro, Ukraine

Bibliografia

• 1. Buryan Yu.A., V.N. Sorokin, M.V. Silkov, Yu.F. Galuza. 2015. “Hydraulic inertial motion transformer with rubber-cord casing”. Omsk Scientific Bulletin 1(137): 30-33.
• 2. Manashkin L., S. Myamlin, V. Prikhodkoю 2009. Oscillation dampers and shock absorbers in railway vehicles (mathematical models). Dnipropetrovsk. 180 p. DOI: 10.15802/978-966-348-121-0.
• 3. Czech P. 2012. „Determination of the course of pressure in an internal combustion engine cylinder with the use of vibration effects and radial basis function - preliminary research”. Communications in Computer and Information Science 329: 175-182. 12th International Conference on Transport Systems Telematics (TST 2012). Katowice-Ustron, Poland, October 10-13, 2012. Telematics In The Transport Environment. DOI: https://doi.org/10.1007/978-3-642-34050-5_21.
• 4. Sága M., L. Jakubovičová. 2014. “Computational analysis of contact stress distribution in the case of mutual stewing of roller bearing rings”. Novel Trends in Production Devices and Systems, Applied Mechanics and Materials 474: 363-368.
• 5. Sapietova A., V. Dekys. 2016. „Use od Msc. Adams software product in modeling vibration sources”. Komunikacie 1a(101): 101-107.
• 6. Urbanský M., J. Homišin, P. Kaššay, J. Krajňák. 2018. „Measurement of air springs volume using indirect method in the design of selected pneumatic devices”. Acta Mechanica et Automatica 12(1): 19-22. ISSN 1898-4088.
• 7. Żółtowski B., M. Żółtowski. 2018. “Selection measure of energy propagation in vibration diagnostic and modal analysis methods”. Diagnostyka 19(4):19-26. DOI: 10.29354/diag/94753.

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).