Comparative analysis of turning and traverse grinding of bearing steel parts in hardened state

• Autorzy: Plichta J. , Nadolny K. , Wojcieszak S.

Identyfikatory

DOI

10.30464/jmee.2018.2.2.89

• Języki publikacji: EN

Abstrakty

EN

The article describes the results of experiments which were intended to compare the results of turning and traverse grinding of internal cylindrical surfaces of rings made of bearing steel (100Cr6) in hardened state (62±2HRC). During experimental investigations, particular attention was paid to the machining performance and roughness of the machined surface. The results of the research presented in this article confirm the advantage of the turning process over traverse grinding using grinding wheels with zone-diversified structure.

Słowa kluczowe

EN

turning; traverse grinding; bearing steel; surface roughness; process efficiency

PL

toczenie; szlifowanie osiowe; stal łożyskowa; chropowatość powierzchni; efektywność procesu

• Wydawca: Wydawnictwo Uczelniane Politechniki Koszalińskiej
• Czasopismo: Journal of Mechanical and Energy Engineering
• Rocznik: 2018
• Tom: Vol. 2, No 2
• Strony: 89--94
• Opis fizyczny: Bibliogr. 10 poz., rys., tab., wykr.

Twórcy

autor

Plichta J.

• Faculty of Mechanical Engineering, Department of Production Engineering, Koszalin University of Technology, Raclawicka 15-17, 75-620 Koszalin, Poland

autor

Nadolny K.

• Faculty of Mechanical Engineering, Department of Production Engineering, Koszalin University of Technology, Poland

autor

Wojcieszak S.

• Faculty of Mechanical Engineering, Department of Production Engineering, Koszalin University of Technology, Poland

Bibliografia

• 1. Grzesik W., Żak K., Kiszka P. (2014) Comparison of surface textures generated in hard turning and grinding operations. Procedia CIRP, Vol. 13, pp. 84-89. DOI: 10.1016/j.procir.2014.04.015.
• 2. Grzesik W., Żak K. (2013) Producing high quality hardened parts using sequential hard turning and ball burnishing operations. Precision Engineering, Vol. 37, No. 4, pp. 849-855. DOI: 10.1016/j.precisioneng.2013.05.001.
• 3. Grzesik W., Żak K. (2012) Modification of surface finish produced by hard turning using superfinishing and burnishing operations. Journal of Materials Processing Technology, Vol. 212, No. 1, pp. 315-322. DOI: 10.1016/j.jmatprotec.2011.09.017.
• 4. Guo Y.B, Sahni J. (2004) A comparative study of hard turned and cylindrically ground white layers. International Journal of Machine Tools and Manufacture, Vol. 44, No. 2-3, pp. 135-145. DOI: 10.1016/j.ijmachtools.2003.10.009.
• 5. Guo Y.B., Warren A.W. (2008) The impact of surface integrity by hard turning vs. grinding on fatigue damage mechanisms in rolling contact. Surface and Coatings Technology, Vol. 2013, No. 3-4, pp. 291-299. DOI: 10.1016/j.surfcoat.2008.09.005.
• 6. Guo Y.B, Yen D.W. (2004) Hard turning versus grinding – the effect of process-induced residual stress on rolling contact. Wear, Vol. 256, No. 3-4, pp. 393-399. DOI: 10.1016/S0043-1648(03)00443-5.
• 7. Nadolny K. (2013) A review on single-pass grinding processes. Journal of Central South University of Technology, Vol. 20, No. 6, pp. 1502-1509. DOI: 10.1007/s11771-013-1641-5.
• 8. Nadolny K. (2016) Shaping the cutting ability of grinding wheels with zone-diversified structure. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 230, No. 2, pp. 254-266. DOI: 10.1177/0954405414554019.
• 9. Nadolny K., Słowiński B. (2011) The effects of wear upon the axial profile of a grinding wheel in the construction of innovative grinding wheels for internal cylindrical grinding. Advances in Tribology, Vol. 2011, Article ID 516202, 11 pages.DOI:10.1155/2011/516202.
• 10. Waikar R.A., Guo Y.B. (2008) A comprehensive characterization of 3D surface topography induced by hard turning versus grinding. Journal of Materials Processing Technology, Vol. 197, No. 1-3, pp. 189-199. DOI: 10.1016/j.jmatprotec.2007.05.054.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).