Preliminary statistical analysis of anthropometrics data in related to sitting posture among college students at east coast Malaysia

• Autorzy: Ibrahim M.H. , Ishak N.F. , Mukhtar N.Z. , Basir M.H. , Said N.A. , Mohamed K.A. , Awang M.E.

Identyfikatory

DOI

10.5604/01.3001.0016.1193

• Języki publikacji: EN

Abstrakty

EN

Purpose: To statistically analyse sitting posture using anthropometrics data among college students in Malaysia. Design/methodology/approach: This study was conducted among 52 college students consisting of males and females. Data were analysed using a common statistical tool which is the Statistical Package of Sosial Science (SPSS). Findings: Preliminary analysis of data indicated that there are wider differences in standard deviation of eye sitting height compared to the previous study conducted. Research limitations/implications: This study was conducted at only one higher learning institution/college located at East Cost of Malaysia. Practical implications: The larger value of standard deviation discovered as statistical analysis performed using combined data among male and female participants suggested that data should be segregated. Originality/value: Result obtained could be used as a preliminary guideline to design any related item in related to sitting posture.

Słowa kluczowe

EN

sitting posture; anthropometric data; human health

PL

pozycja siedząca; dane antropometryczne; zdrowie człowieka

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2022
• Tom: Vol. 116, nr 2
• Strony: 81--85
• Opis fizyczny: Bibliogr. 13 poz.

Twórcy

autor

Ibrahim M.H.

• Faculty of Engineering Technology, University College TATI, 24000 Kemaman, Terengganu, Malaysia

• https://orcid.org/0000-0003-0113-3107

autor

Ishak N.F.

• Faculty of Engineering Technology, University College TATI, 24000 Kemaman, Terengganu, Malaysia

autor

Mukhtar N.Z.

• Faculty of Engineering Technology, University College TATI, 24000 Kemaman, Terengganu, Malaysia

autor

Basir M.H.

• Faculty of Engineering Technology, University College TATI, 24000 Kemaman, Terengganu, Malaysia

autor

Said N.A.

• Faculty of Engineering Technology, University College TATI, 24000 Kemaman, Terengganu, Malaysia

autor

Mohamed K.A.

• Faculty of Engineering Technology, University College TATI, 24000 Kemaman, Terengganu, Malaysia

autor

Awang M.E.

• Faculty of Engineering Technology, University College TATI, 24000 Kemaman, Terengganu, Malaysia

Bibliografia

• [1] R.M. Yusuff, D.D.I. Daruis, S.Z.M. Dawal, S.N. Hassan, Development of an Anthropometry Database for the Malaysian Population: Problem and Challenges, Malaysian Journal of Public Health Medicine 16/Suppl.2 (2016) 36-43.
• [2] C.D. Wickens, J. Lee, S.E. Gordon, An Introduction to Human Factors Engineering, 2nd Edition, Pearson Education, 2014.
• [3] C.M. Bauer, I. Nast, M. Scheermesser, R.P. Kuster, D. Textor, M. Wenger, J. Kool, D. Baumgartner, A novel assistive therapy chair to improve trunk control during neurorehabilitation: Perceptions of physical therapists and patients, Applied Ergonomics 94 (2021) 103390. DOI: https://doi.org/10.1016/j.apergo.2021.103390
• [4] C. Bontrup, W.R. Taylor, M. Fliesser, R. Visscher, T. Green, P-M. Wippert, R. Zemp, Low back pain and its relationship with sitting behaviour among sedentary office workers, Applied Ergonomics 81 (2019) 102894. DOI: https://doi.org/10.1016/j.apergo.2019.102894
• [5] C.C. Roossien, J. Stegenga, A.P. Hodselmans, S.M. Spook, W. Koolhaas, S. Brouwer, G.J. Verkerke, M.F. Reneman, Can a smart chair improve the sitting behavior of office workers?, Applied Ergonomics 65 (2017) 355-361. DOI: https://doi.org/10.1016/j.apergo.2017.07.012
• [6] R.M. Yusuff, Z. Baba, S.Z.M. Dawal, T. Evelyn, Malaysian Ergonomics Standards ‒ Its Development, Awareness and Implementation ‒ A Review Article, Iranian Journal of Public Health 45/Suppl.1 (2016) 1-8.
• [7] A.P. Bochkovskyi, N.Yu. Sapozhnikova, Development of system of automated occupational health and safety management in enterprises, Journal of Achievements in Materials and Manufacturing Engineering 107/1 (2021) 28-41. DOI: https://doi.org/10.5604/01.3001.0015.2454
• [8] J.F. Rohani, M.R. Abdul Rania, A.J. Adeyemi, M.O. Arowoloa, Level of Implementation of Ergonomic Based School furniture for Malaysian Children, Proceedings of the 19th Triennial Congress of the IEA, Melbourne, 2015, 9-14.
• [9] O. Nanka, M. Lysychenko, M. Kiriyenko, V. Pavlykivskyi, T. Duyunova, I. Senchuk, Relationship study between the student learning approach in the occupational safety and health field and acquired competencies, Journal of Achievements in Materials and Manufacturing Engineering 95/1 (2019) 32-41. DOI: https://doi.org/10.5604/01.3001.0013.7623
• [10] S. Ansari, A. Nikpay, S., Varmazyar Design and Development of an Ergonomic Chair for Students in Educational Settings, Health Scope 7/4 (2018) e60531. DOI: https://dx.doi.org/10.5812/jhealthscope.60531
• [11] T.V. Perneger, D.S. Courvoisier, P.M. Hudelson, A. Gayet-Ageron, Sample size for pre-tests of questionnaires, Quality of Life Research 24 (2015) 147-151 DOI: https://doi.org/10.1007/s11136-014- 0752-2 [
• [12] R.M. Farooqui, R. Shahu, Analysis of Anthropometric Dimensions for Sitting Posture and Chair Design: A Review, International Journal of Innovations in Engineering and Technology 6/3 (2016) 221-224.
• [13] N.I. Abd Rahman, S.Z.M. Dawal, N. Yusoff, N.S.M. Kamil, Anthropometric measurements among four Asian countries in designing sitting and standing workstations, Sādhanā 43 (2018) 10. DOI: https://doi.org/10.1007/s12046-017-0768-8

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).