High voltage pulse generation using magnetic pulse compression

• Autorzy: Balcerak M. , Hołub M. , Pałka R.
• Języki publikacji: EN

Abstrakty

EN

The paper presents an overview of a method of nanosecond-scale high voltage pulse generation using magnetic compression circuits. High voltage (up to 18 kV) short pulses (up to 1.4 μs) were used for Pulsed Corona Discharge generation. In addition, the control signal of parallel connection of IGBT and MOSFET power transistor influence on system losses is discussed. For a given system topology, an influence of core losses on overall pulse generator efficiency is analysed.

Słowa kluczowe

EN

kicker power supply; power source for pulse corona discharge; magnetic pulse compression; parallel connection of IGBT and MOSFET transistors

• Wydawca: Polish Academy of Sciences, Committee on Electrical Engineering
• Czasopismo: Archives of Electrical Engineering
• Rocznik: 2013
• Tom: Vol. 62, nr 3
• Strony: 463--472
• Opis fizyczny: Bibliogr. 10 poz., rys., tab.

Twórcy

autor

Balcerak M.

• Electrical Engineering Department West Pomeranian University of Technology Szczecin Sikorskiego 37, 70-313 Szczecin, Poland tel. [phone], fax. [phone]

autor

Hołub M.

• Electrical Engineering Department West Pomeranian University of Technology Szczecin Sikorskiego 37, 70-313 Szczecin, Poland tel. [phone], fax. [phone]

autor

Pałka R.

• Electrical Engineering Department West Pomeranian University of Technology Szczecin Sikorskiego 37, 70-313 Szczecin, Poland tel. [phone], fax. [phone]

Bibliografia

• [1] Wang D., Namihira T., Akiyama H., Pulsed Discharge Plasma for Pollution Control. [In:] Villanyi V. (Ed.). Air Pollution. Sciyo, Rijeka, Croatia, ISBN 978-953-307-143-5, pp. 265-287 (2010).
• [2] Kalisiak S., Hołub M., Modified Fitch generator topology for non-thermal plasma applications. Przegląd Elektrotechniczny (Polish Electrical Review), No 7/2009, pp. 134-137 (2009).
• [3] Smith C.H., Terawatts and Nanoseconds-Metallic Glasses in Pulse Power Systems. Journal of Materials Engineering 12(1): 35-40 (1990).
• [4] Liu Z., Pemen A.J.M., van Hoppe R.T.W.J., Winands G.J.J., van Heesch E.J.M., Yan K., An Efficient,Repetitive Nanosecond Pulsed Power Generator with Ten Synchronized Spark Gap Switches. IEEE Transactions on Dielectrics and Electrical Insulation, August 2009, 16(4): 918-925 (2009).
• [5] Zhang D.D., Yan P., Sun Y.H., Wang J., Zhou Y., Pan R.Z., Characteristics of Magnetic Core inMagnetic Pulse Compression System. Acta Physica Polonica A 6(115), Proceedings of the 2nd Euro-Asian Pulsed Power Conference, Vilnius, Lithuania, September 22-26 (2008).
• [6] Shen W., Wang F., Boroyevich D., Tipton C. W., Loss Characterization and Calculation of NanocrystallineCores for High-Frequency Magnetics Applications. IEEE Transactions on Power Electronics, January 2008, 23(1): 475-484 (2008).
• [7] Wang D., Wu W., Li D., Wang L., Compact magnetic compression repetitive pulsed power generatorbased on IGBT, International Conference on Electrical Machines and Systems ICEMS 2008, pp. 1255-1258 (2008).
• [8] Utz S., Pforr J. Turn-on behaviour of automotive multi-phase converters with coupled inductors. 15th International Power Electronics and Motion Control Conference EPE-PEMC 2012 ECCE Europe, Novi Sad, Serbia, pp. LS3c.3-1-LS3c.3-8 (2012).
• [9] Frisch M., Ernö T., Innovative Topologies for High Efficient Solar Applications. Power Electronics Europe, 03/2009, pp. 32-33 (2009).
• [10] Jang S.D., Son Y.G., Oh J.S., Cho M.H., Koh D.J., Pulsed Plasma Process for Flue Gas Removalfrom an Industrial Incinerator by Using a Peak 200-kV, 10-kA Pulse Modulator. Journal of the Korean Physical Society, May 2004, 44(5): 1157-1162 (2004).