Tytuł artykułu
Autorzy
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Ceramic - metal composites are widely used materials in a whole world. There were invented many fabrication methods for those kind of materials, but still exists some problems which need to be fixed. Stability of high density metal particles (e.g. W, Mo, Nb) in ceramic-metal composite suspensions is one of crucial issues to be solved in order to obtain homogenous composite material with desired properties such as high fracture toughness, mechanical strength, hardness, wear resistance. In this paper, results of two different methods of stabilizing W particles in Al2O3 - W - H2O system were compared. The zeta potential by laser doppler electrophoresis, stability by static multiple light scattering and rheological behavior of prepared suspensions were analyzed. As a result application of hetero-flocculation effect was consider as a good way to obtain homogeneous dispersion of metal particles with a high density.
Słowa kluczowe
Wydawca
Czasopismo
Rocznik
Tom
Strony
1465--1470
Opis fizyczny
Bibliogr. 13 poz., rys., tab., wykr., wzory
Twórcy
autor
- Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland
- Institute of High Pressure Physics, Polish Academy Of Science, Warsaw, Poland
autor
- Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland
autor
- Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland
Bibliografia
- [1] J. S. Moya, S. Lopez-Esteban, C. Pecharronian, Prog. Mater. Sci. 52, 1017-1090 (2007).
- [2] K. Konopka, L. Litynska-Dobrzynska, J. Dutkiewicz, Arch. Metall. Mater. 58, 501-504 (2013).
- [3] T. Rodriguez-Suarez, J. F. Bartolome, J. S. Moya, Fract. Reliab. Ceram Hybrid Mater. 32, 3887-3898 (2012).
- [4] A. Smimov, J. F. Bartolomé, J. Eur. Ceram Soc. 32,3899-3904 (2012) .
- [5] G. de Portu, S. Guicciardi, C. Melandri, F. Monteverde, Wear, 262, 1346-1352 (2007).
- [6] E. Fernandez-Garcia, C.F. Gutierrez-Gonzalez, A. Fernandez, R. Torrecillas, S. Lopez-Esteban, Ceram Int. 39, 6931-6936(2013) .
- [7] T. Rodriguez-Suarez, J. F. Bartolomé, A. Smimov, S. Lopez-Esteban, R. Torrecillas, J. S. Moya, J. Eur. Ceram. Soc. 31, 1389-1395 (2011).
- [8] M. Szafran, K. Konopka, E. Bobryk, K. J. Kurzydlowski. Ref. Reports IX Conf. Exhib. Eur. Ceram. Soc. IX Conf. Exhib. Eur. Ceram. Soc. 27,651-654 (2007).
- [9] A. Miazga, K. Konopka, M. Gizowska, M. Szafran, Powder Metall. Met. Ceram 52, 567-571 (2014).
- [10] K. Niihara, B.-S. Kim T. Nakayama, T. Kusunose, T. Nomoto, A. Hikasa, et al., J. Eur. Ceram Soc. 24, 3419-3425 (2004).
- [11] S. Chen, C. Zhang, Y. Zhang, H. Hu, Compos. Part B Eng. 60, 222-226 (2014).
- [12] T. Rodriguez-Suarez, L. a Diaz, S. Lopez-Esteban, C. Pecharronian, a Esteban-Cubillo, L. Gremillard, et al., Nanotechnology. 19, 215605 (2008).
- [13] K. M. Andersson, L. Bergström, J. Am. Ceram. Soc. 85, 2404-2408 (2002).
Uwagi
EN
This work was supported by the Polish National Centre of the Science (NCN) under Grant No. 2014/13/N/ST5/03438. Stability measurements wras done with use of equipment from Laboratory of Nanostructures for Photonics and Nanomedicine, IHPP PAS, Warsaw, Poland
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-23f513cd-95ea-4714-9718-3306fc5e082d