Examination and assessment of the impact of working conditions on operating parameters of selected conveyor belts

• Autorzy: Bajda Mirosław , Hardygóra Monika

Identyfikatory

DOI

10.37190/msc222910

• Języki publikacji: EN

Abstrakty

EN

The effect of the operation of two textile-core conveyor belts, type B-1600 P-1600/5 8+4 H, which operated in one of the lignite mines, on their strength and operating parameters was determined. During the operation of the belts on the conveyor, the amount and type of spoil transported were recorded, as well as the belt’s operating time. The results of tests on the strength parameters of the belts in operation were compared with the results of tests performed on the same belts before their operation.

Słowa kluczowe

EN

belt conveyor; conveyor belt; textile belt; belt testing

• Wydawca: Wydział Geoinżynierii, Górnictwa i Geologii, Instytut Górnictwa Politechniki Wrocławskiej
• Czasopismo: Mining Science
• Rocznik: 2022
• Tom: Vol. 29
• Strony: 165--178
• Opis fizyczny: Bibliogr. 14 poz., rys., tab.

Twórcy

autor

Bajda Mirosław

• Faculty of Geoengineering, Mining and Geology, Wroclaw University of Science and Technology, Poland

autor

Hardygóra Monika

• Faculty of Geoengineering, Mining and Geology, Wroclaw University of Science and Technology, Poland

Bibliografia

• ANDREJIOVA M., GRINCOVA A., MARASOVA D., 2020, Analysis of tensile properties of worn fabric conveyor belts with renovated cover and with the different carcass type, Eksploatacja i Niezawodność – Maintenance and Reliability, 22, 472–481; http://dx.doi.org/10.17531/ein.2020.3.10
• BAJDA M., 2019, IOP Conf. Ser.: Earth Environ. Sci., 221, 012098, DOI: 10.1088/1755-1315/221/1/012098.
• BAJDA M., HARDYGORA M., 2018, The influence of natural ageing processes on the strength parameters of steel cord conveyor belts, International Journal of Mining, Reclamation and Environment, DOI: 10.1080/17480930.2018.1436030.
• BARDZINSKI P., JURDZIAK L., KAWALEC W., KRÓL R., 2020, Copper ore quality tracking in a belt conveyor system using simulation tools, Natural Resources Research, 29 (2), 1031–1040, DOI: 10.1007/s11053-019-09493-6.
• BARDZINSKI P.J., KROL R., JURDZIAK L., 2019, Empirical model of discretized copper ore flow within the underground mine transport system, International Journal of Simulation Modelling, 18 (2), 279–289, DOI: 10.2507/IJSIMM18(2)473.
• BŁAŻEJ R., JURDZIAK L., KIRJANÓW-BŁAŻEJ A., BAJDA M., OLCHÓWKA D., RZESZOWSKA A., 2022, Profitability of Conveyor Belt Refurbishment and Diagnostics in the Light of the Circular Economy and the Full and Effective Use of Resources, Energies, 15 (20), 1–15, DOI: 10.3390/en15207632.
• BORTNOWSKI P., KAWALEC W., KRÓL R., OZDOBA M., 2022, Types and causes of damage to the conveyor belt – review, classification and mutual relations, Engineering Failure Analysis, 140, DOI: 10.1016/j.engfailanal.2022.106520.
• DOROSZUK B., KRÓL R., 2019, Analysis of conveyor belt wear caused by material acceleration in transfer stations, Mining Science, 26, 189–201, DOI: 10.5277/msc192615.
• JURDZIAK L., 2000, The conveyor belt wear index and its application in belts replacement policy. Proceedings of the Ninth International Symposium on Mine Planning and Equipment Selection, Athens, 6–9 November 2000, A.A. Balkema, 589–594.
• KIRJANÓW-BŁAŻEJ A., BŁAŻEJ R., KOZŁOWSKI T., RZESZOWSKA A., 2022, Innovative diagnostic device for thickness measurement of conveyor belts in horizontal transport, Scientific Reports, 12 (1), DOI: 10.1038/s41598-022-11148-1.
• KRÓL R., 2017, Studies of the durability of belt conveyor idlers with working loads taken into account, Paper presented at the IOP Conference Series: Earth and Environmental Science, 95 (4), DOI: 10.1088/1755-1315/95/4/042054.
• MARASOVA D., AMBRISKO L., ANDREJIOVA M., 2017, Examination of the process of damaging the top covering layer of a conveyor belt applying the FEM, Measurement, 112, 47–52, DOI: 10.1016/j.measurement.2017.08.016.
• RUDAWSKA A., MADLEŇÁK R., MADLEŇÁKOVÁ L., DROŹDZIEL P., 2020, Investigation of the effect of operational factors on conveyor belt mechanical properties, Appl. Sci., 10, 4201.
• WALKER P., DOROSZUK B., KRÓL R., 2020, Analysis of ore flow through longitudinal belt conveyor transfer point, Eksploatacja i Niezawodność, 22 (3), 536–543, DOI: 10.17531/ein.2020.3.17.