Preparation and performance in IR and UV of transparent inorganic polysiloxane coating with dispersed TiO2 on glass substrates

• Autorzy: Saudi S. A. , Mohd A. F.

Identyfikatory

DOI

10.5604/01.3001.0016.2155

• Języki publikacji: EN

Abstrakty

EN

Purpose: The aim of the presented work was to develop an economical, transparent coating with dispersed TiO2 dispersion and inorganic polysiloxane resin for glass windows application and to study its effectiveness in filtering IR and UV radiations. Design/methodology/approach: Two oligomeric silanes were prepared in different molar ratios to produce inorganic polysiloxane resin. They were tested for their viscosity to reflect the completion of the reaction and form an amide linkage. FTIR was done to support the viscosity result by proving the presence of amide linkages. 10%, 20%, and 30% of compounded TiO2 were successfully dispersed in 0.3% sodium sulfosalicylate (dehydrated ethanol). Each TiO2 concentration was characterized for size distribution and polydispersity index (PDI). Additives solutions of 2-hydroxybenzophenone (HBP) and boron trifluoride (BF3) were also soluted in the same solvent. Glass substrates were coated with the formulations and tested for curing and hardness properties. Windows Energy Profiler (WEP) was used to study the UV, IR, and daylight transmission of the coated glasses. Findings: Each inorganic polysiloxane resin showed various viscosity values before reaching a constant state which designates complete formations of amide linkages. Polysiloxane resin with a viscosity value of 30.5 mPa/s was the most ideal to act as a binder. FTIR characterization proved the formation of amide linkages. The particle size distribution of TiO2 recorded the size of 87 nm after dispersion with correlating value of 1 PDI. The fastest drying time of 3 hours was recorded. The pencil hardness test quoted 6H pencil as the hardest pencil grade. WEP analysis of UV, IR, and daylight transmission gives satisfactory results of 0%, 7%, and 61%, respectively. Research limitations/implications: Laboratory analysis for viscosity tests often being held off. The test requires the samples to be transferred in a cylinder with an open-air spindle rotation. Samples react with the surrounding environment. Thus, polymerization takes place rapidly, resulting in hardened samples inside the cylinder. The different measure was taken by wrapping the testing area with aluminium foil. This research was conducted under equatorial climate. Practical implications: The obtained test results may contribute to the conclusion of transparent TiO2 nano-particles coating on glass substrates for windows application. This can reduce the electricity usage in buildings for artificial cooling to provide indoor thermal comfort. Smart coating formulations have a noticeable effect on filtering harmful solar radiation. Originality/value: This study presents the economical and undemanding ways to develop transparent smart coating formulation with superior performance against solar radiation. It is expected to have a bright potential in the architectural industry.

Słowa kluczowe

EN

transparent coatings; glass substrate; TiO2 dispersion; IR shielding; UV shielding; ultra-high shearing dispersion

PL

powłoki przezroczyste; podłoże szklane; dyspersja; TiO2; promieniowanie podczerwone; promieniowanie ultrafioletowe; ekranowanie

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2022
• Tom: Vol. 114, nr 2
• Strony: 49--56
• Opis fizyczny: Bibliogr. 19 poz., rys., tab., wykr.

Twórcy

autor

Saudi S. A.

• School of Industrial Technology, Department of Polymer Chemistry Science and Technology, Faculty of Applied Sciences, University of Technology MARA (UiTM), 40450, Shah Alam, Malaysia

• https://orcid.org/0000-0001-8625-1457

autor

Mohd A. F.

• School of Industrial Technology, Department of Polymer Chemistry Science and Technology, Faculty of Applied Sciences, University of Technology MARA (UiTM), 40450, Shah Alam, Malaysia

Bibliografia

• [1] R. Karanen, The Effect of Windows on Thermal Comfort, Degree Thesis, Arcada, 2016. Available from: https://core.ac.uk/download/pdf/45600814.pdf
• [2] E. Yousif, R. Haddad, Photodegradation and Photostabilization of Polymers, Especially Polystyrene: Review, SpringerPlus 2 (2013) 398. DOI: https://doi.org/10.1186/2193-1801-2-398
• [3] M. Brenner, V.J. Hearing, The Protective Role of Melanin Against UV Damage in Human Skin, Photochemistry and Photobiology 84/3 (2008) 539-549. DOI: https://doi.org/10.1111/j.1751-1097.2007.00226.x
• [4] T. Herrling, K. Jung, J. Fuchs, UV - Generated Free Radicals (FR) in Skin and Hair - Their Formation, Action, Elimination and Prevention. A general review, SOFW-Journal 133/8 (2007) 2-11.
• [5] J. Rommens, A. Verhaege, G. Michiels, M. Diebold, TiO 2 Impact on Paint Weather Resistance, Coatings World. Access in: 15.09.2021, Available from: https://www.coatingsworld.com/issues/2017-09-01/view_features/tio2-impact-on-paint-weather-resistance/
• [6] R.V.D. Belt, E. Currie, Dispersion of Nanoparticles in Organic Solvents, United States Patent Application Publication, 9 December 2010. Access in: 10.12.2020, Available from: https://patentimages.storage.googleapis.com/3d/0d/06/834fdb17230481/US8333831.pdf
• [7] N. Liu, J. Yu, Y. Meng, Y. Liu, Hyperbranched polysiloxanes based on polyhedral oligomeric silsesquioxane cages with ultra-high molecular weight and structural tuneability, Polymers 10/5 (2018) 496. DOI: https://doi.org/10.3390/polym10050496
• [8] R.P.D. Melo, V.D.O. Aguiar, M.D.F.V. Marques, Silane Crosslinked Polyethylene from Different Commercial PE’s: Influence of Comonomer, Catalyst Type and Evaluation of HLPB as Crosslinking Coagent, Materials Research 18/2 (2015) 313-319. DOI: https://doi.org/10.1590/1516-1439.303214
• [9] K. Hughes, Professional Painting Knowledge Base Inorganic Coatings for Industrial Projects. Performance Painting: Prepare, Protect, Preserve, 30 October 2018. Access in: 9.12.2020, Available from: https://www.performance-painting.com
• [10] J. Liu, Q. Xu, F. Shi, S. Liu, J. Luo, L. Bao, Dispersion of Cs0.33WO 3 Particles for Preparing its Coatings with Higher Near Infrared Shielding Properties, Applied Surface Science 309 (2014) 175-180. DOI: https://doi.org/10.1016/j.apsusc.2014.05.005
• [11] X. Chen, S. Zhou, B. You, Ambient-curable Polysiloxane Coatings: Structure and Mechanical Properties, Journal of Sol-Gel Science and Technology 58 (2011) 490-500. DOI: https://doi.org/10.1007/s10971-011-2418-7
• [12] Y. Liu, Z. Yu, S. Zhou, L. Wu, De-agglomeration and Dispersion of Nano-TiO2 in an Agitator Bead Mill, Journal of Dispersion Science and Technology 27/7 (2006) 983-990. DOI: https://doi.org/10.1080/01932690600766975
• [13] G. Georgiev, T. Dikova, Hardness Investigation of Conventional Bulk Fill and Flowable Dental Composites, Journal of Achievements in Material and Manufacturing Engineering 109/2 (2021) 68-77. DOI: https://doi.org/10.5604/01.3001.0015.6261
• [14] P.T. Iswanto, H. Akhyar, A. Faqihudin, Effect of Shot Peening on Microstructure, Hardness, and Corrosion Resistance of AISI 316L, Journal of Achievements and Material Manufacturing Engineering 89/1 (2018) 19-26. DOI: https://doi.org/10.5604/01.3001.0012.6668
• [15] J. Koleske (ed), Paint and Coating Testing Manual, 15th Edition, ASTM International, Pennsylvania, 2012.
• [16] L.B. Capeletti, J.H. Zimnoch, Fourier Transform Infrared and Raman Characterization of Silica-Based Materials, in: M.T. Stauffer (ed), Applications of Molecular Spectroscopy to Current Research in the Chemical and Biological Sciences, IntechOpen, London, 2016, 5-22. DOI: http://dx.doi.org/10.5772/64477
• [17] A.A. Issa, A.S. Luyt, Kinetics of Alkoxysilanes and Organoalkoxysilanes Polymerization: A Review, Polymers 11/3 (2019) 537. DOI: https://doi.org/10.3390/polym11030537
• [18] A. Avakov, E. Kosenko, I. Topilin, F. Kopilov, Analysis of methods of assessing the quality of protective paint car coatings, MATEC Web of Conferences 224 (2018) 02103. DOI: https://doi.org/10.1051/matecconf/201822402103
• [19] W. Johansson, A. Peralta, B. Jonson, S. Anand, L. Österlund, S. Karlsson, Transparent TiO2 and ZnO Thin Films on Glass for UV Protection of PV Modules, Frontier in Materials 6 (2019) 259. DOI: https://doi.org/10.3389/fmats.2019.00259

Uwagi

PL

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).