PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!
Tytuł artykułu

Numerical Study of the Behaviour of a Circular Footing on a Layered Granular Soil Under Vertical and Inclined Loading

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
This paper aims to study the behaviour of a circular footing resting on two granular layers, i.e., a dense sand layer resting on loose sand strata, subjected to a vertical and an inclined loading (α=0°, 10°, 20°, 30°) using the finite element (FE) software PLAXIS-3D. The Mohr-Coulomb criterion is employed for the analysis of the model, in which two parameters are considered to vary significantly; (1) thickness of the top layer (dense layer) and (2) friction angle (ф) of both the layers. In the circular footing, the bearing capacity on the layered soil profile is assessed using the mechanism of punching shear failure following the desired area approach. The punching shear failure mechanism formed in dense sand has a parabolic shape at the ultimate load when the maximum mobilization of shear force through the failure surface is taken into account, otherwise, the punching failure is the actual failure while punching in the lower layer continues to a greater extent, depending on the interface load. Bearing pressure decreases as the inclination increases with respect to the vertical, along with bearing pressure increasing as the thickness of the dense sand layer increases. The software results compare well with data available from the literature.
Rocznik
Strony
29--43
Opis fizyczny
Bibliogr. 15 poz., rys., tab., wykr.
Twórcy
  • Department of Civil Engineering, NIT Hamirpur, Himachal Pradesh - student, India
  • Department of Civil Engineering, NIT Hamirpur, Himachal Pradesh, India
Bibliografia
  • 1. Acharyya, R. and Dey, A. 2017. Finite Element Investigation of the Bearing Capacity of Square Footings Resting on Sloping Ground. INAE Letters, 2(3), 97–105.
  • 2. Bolton, MD 1986. The strength and dilatancy of sands. Geotechnique, 36(1), 65–78.
  • 3. Bowles, JE 1977. Foundation analysis and design. McGraw-Hill.
  • 4. Burd, HJ and Frydman, S., 1997. Bearing capacity of plane-strain footings on layered soils. Canadian Geotechnical Journal, 34(2), 241–253. https://doi.org/10.1139/cgj-34-2-241.
  • 5. Chakraborty, D., Kumar, J., 2015. Seismic bearing capacity of shallow embedded foundations on a sloping ground surface. International Journal of Geomechanics, 15(1), 1-18.
  • 6. HANNA, AM 1981. Foundation on Strong Sand Overlying Weak Sand. J. Geotech. Engrg. Div., 107(7), 915–927.
  • 7. HANNA, AM 1982. Bearing Capacity of Foundations on a Weak Sand Layer Overlying a Strong Deposit. Can Geotech J, V 19(N 3), 392–396.
  • 8. Khatri, VN., Kumar, J. and Akhtar, S., 2017. Bearing capacity of foundations with inclusion of dense sand layer over loose sand strata. International Journal of Geomechanics, 17(10), 1-8.
  • 9. Meyerhof, GG 1974. Ultimate Bearing Capacity of Footings on Sand Layer Overlying Clay. Can Geotech J, 11(2), 223-229.
  • 10. Michalowski, RL and Shi, L., 1995. Bearing capacity of footings over two layer foundation soils. Journal of Geotechnical Engineering, 121(5), 421-428.
  • 11. Ornek, M., Demir, A., Yildiz, A. and Laman, M. 2012. Numerical analysis of circular footings on natural clay stabilized with a granular fill. Acta Geotechnica Slovenica, 9(1), 61-75.
  • 12. Sharma, V. and Kumar, A., 2018. Behavior of ring footing resting on reinforced sand subjected to eccentric-inclined loading. Journal of Rock Mechanics and Geotechnical Engineering, 10(2), 347-357.
  • 13. Shiau, JS, Lyamin, AV and Sloan, SW 2003. Bearing capacity of a sand layer on clay by finite element limit analysis. Canadian Geotechnical Journal, 40(5), 900-915.
  • 14. Thakur, A. and Dutta, RK 2020. Experimental and numerical studies of skirted hexagonal footings on three sands. SN Applied Sciences, 2(3), 1-11.
  • 15. Zidan, AF 2012. Numerical Study of Behavior of Circular Footing on Geogrid-Reinforced Sand Under Static and Dynamic Loading. Geotechnical and Geological Engineering, 30(2), 499-510.
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-23ca42f7-137d-4718-a02b-43bf890227c5
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.