Thermoplastic Polyurethane Based on the 3d Printing Fashion Clothing- Conceptual Model of The Fashion Industry

• Autorzy: Hossen Muhammad Ilias , Wang Chaoxia

Identyfikatory

DOI

10.2478/ftee-2022-0047

• Języki publikacji: EN

Abstrakty

EN

The application of 3D printing technology has been relatively slow in the fashion industry. Both in the fashion industry and in 3D printing, the material used plays a very important role. In this direction, thermoplastic polyurethane (TPU) is one material that has started to grab the attention of researchers, producers, and customers. While many have studied 3D printing technology using thermoplastic polyurethane material in the fashion industry from different perspectives, fewer researchers have addressed the actual adoption of thermoplastic polyurethane based 3D printing in the fashion industry. Thus, the present research has been focused to propose an adoption model for thermoplastic polyurethane based 3D-printed fashion clothes. Factor analysis was conducted to find and analyse the most relevant factors. Further exploratory factor analysis was conducted to test the proposed model. The study proposed a model for adoption based on four factors: motivation to buy, customer attitude, and the challenges and benefits associated with the adoption of thermoplastic polyurethane based 3-D printed fashion clothes.

Słowa kluczowe

EN

TPU; thermoplastic polyurethane; 3D printing; fashion industry; customer adoption; Kaiser-Meyer-Olkin test; Bartlett test; conceptual model

• Wydawca: Sieć Badawcza Łukasiewicz - Łódzki Instytut Technologiczny
• Czasopismo: Fibres & Textiles in Eastern Europe
• Rocznik: 2022
• Tom: Vol. 30, no. 6
• Strony: 1--11
• Opis fizyczny: Bibliogr. 27 poz., rys., tab.

Twórcy

autor

Hossen Muhammad Ilias

• College of Textile Science and Engineering, Ministry of Education Jiangnan University, Wuxi, 214122, P.R. China

autor

Wang Chaoxia

• College of Textile Science and Engineering, Ministry of Education Jiangnan University, Wuxi, 214122, P.R. China

Bibliografia

• 1. Kim S, Seong H, Her Y, Chun J. A study of the development and improvement of fashion products using a FDM type 3D printer. Fash Text. 2019;6(1):1–24.
• 2. Vanderploeg A, Lee SE, Mamp M. The application of 3D printing technology in the fashion industry. Int J Fash Des Technol Educ. 2017;10(2):170–9.
• 3. Sun L, Zhao L. Envisioning the era of 3D printing: a conceptual model for the fashion industry. Fash Text. 2017;4(1):1–16.
• 4. Chun J. Development of wearable fashion prototypes using entry-level 3D printers. J Korean Soc Cloth Text. 2017;41(3):468–86.
• 5. Sun D, Valtasa A. 3D printing in modern fashion industry. J Text Sci Fash Technol. 2019;2(2):1–4.
• 6. McCormick H, Zhang R, Boardman R, Jones C, Henninger CE. 3D-Printing in the Fashion Industry: A Fad or the Future? In: Technology-Driven Sustainability. Cham: Palgrave Macmillan; 2020. p. 137–54.
• 7. Spahiu T, Canaj E, Shehi E. 3D printing for clothing production. ournal Eng Fibers Fabr. 2020;15.
• 8. The Gaurdian. Are we ready to 3D print our own clothes? [Internet]. The Gaurdian. 2015. Available from: https://www.theguardian.com/fashion/2015/jul/28/are-we-ready-to-print-our-own-3dclothes
• 9. Aurilia M, Piscitelli F, Sorrentino L, Lavorgna M, Iannace S. Detailed analysis of dynamic mechanical properties of TPU nanocomposite: The role of the interfaces. Eur Polym J. 2011;47(5):925–36.
• 10. Khorasani ST, Feizi R, Tohidi H. The Effect of Poka-Yoke Implementation On Intravenous Medication Error In Hospital Inpatient Pharmacy. In: Proceedings of the 2018 IISE Annual Conference. 2018.
• 11. Han Y, Kim J. A study on the mechanical properties of knit fabric using 3D printingFocused on PLA, TPU Filament. J Fash Bus. 2018;22(4):93–105.
• 12. Jin Y, Li C. Review on the Development of 3D Printing Clothing. Int J Bus Manag Invent. 2020;9(11).
• 13. Jeong J, Park H, Lee Y, Kang J, Chun J. Developing parametric design fashion products using 3D printing technology. Fash Text. 2021;8(1):1–25.
• 14. Heuritech. China’s Burgeoning Fashion Market: Trends And Consumers [Internet]. Heuritech. 2021. Available from: https://www.heuritech.com/fashion-marketchina-consumer-trends/
• 15. Kwon S, E., Kim E, Sung Y, Yun Yoo C. Brand followers: Consumer motivation and attitude towards brand communications on Twitter. Int J Advert. 2014;33(4):657–80.
• 16. Tandon A, Dhir A, Kaur P, Kushwah S, Salo J. Why do people buy organic food? The moderating role of environmental concerns and trust. J Retail Consum Serv. 2020;57.
• 17. Honkanen P, Young JA. hat determines British consumers’ motivation to buy sustainable seafood? Br Food J. 2015;117(4).
• 18. Shao W, Grace D, Ross M. Consumer motivation and luxury consumption: Testing moderating effects. J Retail Consum Serv. 2019;46:33–44.
• 19. Gunawan S. The Impact of Motivation, Perception and Attitude toward Consumer Purchasing Decision: A Study Case of Surabaya and Jakarta Society on Carl’s Junior. iBuss Manag. 2015;3(2):154–63.
• 20. Duggal R. The Key To A Marketer’s Success: Understanding Consumer Motivations [Internet]. Forbes. 2018. Available from: https://www.forbes.com/sites/forbescommunicationscouncil/2018/04/19/the-key-to-a-marketers-success-understanding-consumer-motivations/?sh=2d493d7771ee
• 21. Masood T, Sonntag P. Industry 4.0: Adoption challenges and benefits for SMEs. Comput Ind. 2020;121:103261.
• 22. Arribas V, Alfaro JA. 3D technology in fashion: from concept to consumer. J Fash Mark Manag An Int Journal. 2018;22(2).
• 23. Berger T, Steghöfer JP, Ziadi T, Robin J, Martinez J. The state of adoption and the challenges of systematic variability management in industry. Empir Softw Eng [Internet]. 2020;25(3):1755–97. Available from: https://link.springer.com/article/10.1007/s10664-019-09787-6
• 24. Kline RB. Principles and practice of structural equation modeling. 4th ed. New York: Guilford publications; 2015.
• 25. Bentler PM. Comparative fit indexes in structural models. Psychol Bull. 1990;107(2):238–46.
• 26. Jain TK, Sharma A. Service Quality Model: Model Fit Indices Results. Int J Eng Res Technol [Internet]. 2012;1(10):1–12. Available from: https://www.ijert.org/research/service-quality-model-model-fitindices-results-IJERTV1IS10255.pdf
• 27. MacCallum RC, Browne MW, Sugawara HM. Power analysis and determination of ample size for covariance structure modeling. Psychol Methods. 1996;1(2):130.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).